Influence of dietary sodium bicarbonate on the potassium metabolism of growing dairy calves.

We evaluated the influence of supplemental dietary NaHCO3 on K metabolism of young dairy calves. Thirty-two Holstein and Jersey male and female calves were blocked at 56 to 70 d after birth according to breed, sex, and age and assigned randomly to a 2 x 2 factorial arrangement of dietary treatments for 8 wk: .4% K with 0% NaHCO3, .4% K with 2% NaHCO3, .6% K with 0% NaHCO3, and .6% K with 2% NaHCO3. Feed intake was not affected by dietary KCl or NaHCO3 supplementation, but average daily gain increased with increased K and tended to be reduced by dietary NaHCO3. Plasma K was elevated by increased dietary K but generally was unaffected by NaHCO3. Urinary Ca excretion appeared to be reduced by NaHCO3; urine pH increased with supplemental NaHCO3. Results indicate 1) the K requirement of the growing calf is between .40 and .55% of diet DM, 2) because urinary K excretion was elevated by dietary NaHCO3, the K requirement may be increased when the diet is supplemented with NaHCO3, and 3) average daily gain and plasma K are sensitive indicators of dietary K in the growing calf.     

On the coupling characteristics of coplanar waveguides andmicrostrip lines to multilayer dielectric media

The spectral-domain technique is utilized to optimize the coupling of coplanar waveguides and microstrip lines to lossy dielectric media. It is shown that to enhance the coupling, higher frequencies should be used, the dielectric constant of the substrate should be small (∈=2.56), and the width of the center conductor and gaps should be as large as possible. The dielectric constant of the superstrate should be low if a leaky-wave type of coupling is desired or large if a strong coupling by the transverse-field components is desired. It is shown that the quasi-static TEM and TM₀ modes will be excited if a superstrate is present between a high dielectric lossy media and the coplanar waveguide     

A device to measure the cross-sectional area of soft connectivetissues

A device has been designed and fabricated to measure the cross-sectional area of soft connective tissues ex vivo. It consists of two displacement transducers; one sensing tissue thickness and the other sensing width. Outputs are recorded (via an analog to digital interface) using a personal computer. Numerical integration of a thickness versus width plot computes cross-sectional area. This plot also provides a quality check of acquired data. This device has been successfully used in biomechanical studies of rabbit patellar tendons, rat medial collateral ligaments, and dissected specimens of human fascia.     

Electrical and optical feedback in an InGaAs/InP light-amplifyingoptical switch (LAOS)

A circuit model for optical and electrical feedback has been developed to investigate the cause of negative differential resistance (NDR) switching in a series connected heterojunction phototransistor (HPT) light-emitting diode (LED) device. The model considers optical feedback from the light generated in the LED, electrical feedback from the holes thermally emitted over the LED cladding layer, nonlinear gain of the HPT, the Early effect, and leakage resistance. The analysis shows that either electrical or optical feedback can be the dominant cause for the NDR, depending upon their relative strengths. The NDR observed in the devices was caused primarily by electrical feedback since the optical feedback is weak. For low input power, avalanche breakdown appears to initiate the NDR in the devices although avalanching alone cannot cause NDR     

High‐Tech‐Cellulose‐Funktionspolymere nach dem ALCERU®‐Verfahren

Functional High‐Tech‐Cellulose materials by the ALCERU® process Cellulose is one of the eldest materials of mankind. While the use of cellulose in former times was focused on application as a more construction or as a more textile material at present time the application profile turns to a more functional material using the ALCERU® process. Shaping of pure cellulose dissolution in NMMNO permits the manufacturing of materials for upholstery, filtration or biodegradable film strips having an uniform cross section. Fibreds, which can be applied in several packaging materials, are available using different techniques for regeneration cellulose. A great field of innovative functional cellulose materials is opened up by addition of several functional additives to cellulose dissolution. In this way piezo‐electrical conductive cellulose fibres (PZT) or high‐temperature filtration membranes are to be generated if one adds special types of ceramic powders. Above all PZT green fibres are applied in more recent uses as sensors or actuators. Electrically conductive cellulose fibres or filaments, which can be also used in the textile chain, can be prepared adding conductive carbon black to a cellulose dope on the same way, too. Cellulose material having adapted conductivity to different application is available by adding an exact defined amount of carbon black to cellulose dissolution. Finally cellulose beads can be manufactured by means of varied shaping technique. The beads are showing variable particle sizes and narrow pore size distribution. These properties open up very interesting application in the field of human blood purification or chromatography.     

Integrated-optic dispersion slope equalizer for N/spl times/ several tens of Gb/s WDM transmission

We report a dispersion slope equalizer on a planar lightwave circuit for wavelength division multiplexing (WDM) transmission. This device consists of an array of lattice-formed equalizers with different compensation values fabricated on one wafer and arrayed-waveguide gratings for wavelength multi/demultiplexing. We describe its configuration, operational principle, parameter design, fabrication, and measured characteristics in detail. N/spl times/20 and N/spl times/40 Gb/s slope equalizers were fabricated and their characteristics agreed well with designed values. We also report a reduction in the bias electrical power needed for thermooptic phase shifters in the equalizer array that we realized by employing a phase trimming technique normally used for optical switches.     

Electrical qualification of new ultrathin integration techniques

The aim of this paper is to analyze the feasibility of ultrathin packages through the electrical qualification of the technological process used, i.e. mechanical lapping. It considers polysilicon bipolar transistors which thickness can reach values lower than 10 μm. Forward mode and reverse mode characterizations show no significant degradation of pertinent characteristics, thus allowing to find applications in new compact packaging concept.     

Integration of solvent extraction and liquid membrane separation: An efficient tool for recovery of bio-active substances from botanicals

An integrated process based on simultaneous solid-liquid extraction and liquid membrane separation is proposed for recovery and isolation of valuable species from botanicals. This integration provides complete exhausting of the solid material even in the case of very low solubility of the specified solute in the extracting solvent. Selectivity of the liquid membrane ensures a preferential transport of the desired solute from the native extract into the strip solution, while the other co-extracted species remain predominantly in the native extract.