Manipulation of microenvironment with a built-in electrochemical actuator in proximity of a dissolved oxygen microsensor

Biochemical sensors for continuous monitoring require dependable periodic self diagnosis with acceptable simplicity to check its functionality during operation. An in-situ self-diagnostic technique for a dissolved oxygen microsensor is proposed in an effort to devise an intelligent microsensor system with an integrated electrochemical actuation electrode. With a built-in platinum microelectrode that surrounds the microsensor, two kinds of microenvironments, called the oxygen-saturated or oxygen-depleted phases, can be created by water electrolysis, depending on the polarity. The functionality of the microsensor can be checked during these microenvironment phases. The polarographic oxygen microsensor is fabricated on a flexible polyimide substrate (Kapton) and the feasibility of the proposed concept is demonstrated in a physiological solution. The sensor responds properly during the oxygen-generating and oxygen-depleting phases. The use of these microenvironments for in-situ self-calibration is discussed to achieve functional integration, as well as structural integration, of the microsensor system.     

Characteristics of estrogen decomposition by ozonation.

Since the natural estrogens 17 beta-estradiol (E2) and estron (E1), and the synthetic estrogen 17 alpha-ethynyl estradiol (EE2) have strong endocrine disrupting effects and the tendency to persist in effluent from wastewater treatment plants, effective measures are needed to remove them from wastewater. In this research, to gain an understanding of the characteristics of estrogen decomposition by ozonation, experiments were conducted using effluent from an actual wastewater treatment plant. In this experiment, estrogen was added to effluent at a concentration of 200 ng/l and 20 ng/l before the ozonation experiments. The results showed 90% or more of estrogen concentration and estrogenic activity of E2, El and EE2 to be removed at an ozone dose of 1 mg/l. At an ozone dose of 3 mg/l, the estrogen concentration and estrogenic activity of E2, El and EE2 in the treated water fell below the detection limit. The removal rate was not influenced by the kind of estrogen. No generation of byproducts with estrogenic activity was observed. The authors conclude that estrogen in secondary treated wastewater can be almost entirely removed at the practical ozone dose rate applied for the purpose of disinfection, which is up to about 5 mg/l.     

High voltage (>1kV) and high current gain (32) 4H-SiC power BJTs using Al-free ohmic contact to the base

This letter reports the design and fabrication of 4H-SiC bipolar junction transistors with both high voltage (>1kV) and high dc current gain (/spl beta/=32) at a collector current level of I/sub c/=3.83A (J/sub c/=319 A/cm/sup 2/). An Al-free base ohmic contact has been used which, when compared with BJTs fabricated with Al-based base contact, shows clearly improved blocking voltage. A specific on-resistance of 17 m/spl Omega//spl middot/cm/sup 2/ has been achieved for collector current densities up to 289 A/cm/sup 2/.     

Influence of Solution Composition on the Formation of Crystalline Scales

Scale formation is a difficulty encountered with water containing ions of sparingly soluble salts that can readily precipitate on heat transfer surfaces in evaporative concentration operations. Scale formation, hindering the heat transfer process, increases specific energy consumption and operating costs and causes frequent shut down of the evaporator for cleaning. The effects of changes in composition of the solution due to evaporation and CO₂ release on the formation of crystalline scales in seawater evaporators are studied. A model that predicts the CO₂ release is presented. The carbonate system in the salt solution on its whole flow path through the evaporator and the scaling (crystallization) tendency are described. Simulation results for different process configurations are shown and the differences are discussed, particularly with regard to the incrustation tendency.     

Phase Separation in Ternary Liquid Systems Tetradecane-n-Octanol (or Cyclohexanone)-Lanthanide(III) Nitrate Solvates with Tri-n-Butyl Phosphate

The phase diagrams of ternary liquid systems tetradecane-n-octanol (or cyclohexanone)-lanthanide(III) nitrate solvates with tri-n-butyl phosphate [Ln(NO₃)₃(TBP)₃, Ln = La, Ce, Pr, or Sm] at T = 298.15 K were studied. These diagrams contain areas of homogeneous solutions and an area of separation into two liquid phases (I, II). Phases I and II are enriched in tetradecane and Ln(NO₃)₃(TBP)₃, respectively. n-Octanol and cyclohexanone mainly pass into phase II.     

应变仪测量大坝混凝土自由变形

采用应变仪测量混凝土大坝变形是最常用的一种测量方法。可以将仪器设置在承受全部荷载和作用的混凝土块体中，也可将其置于自由体中，即可测量出混凝土所固有的热湿变形和结构变形。     

The Perception of a Colored Translucent Sheet on a Background

Metelli's theory of the perception of translucency models the effective reflectance of a translucent sheet on a background as a partitive mixture of the color of the sheet and the color of the background. In the achromatic case, the usable (that is, scale-invariant) rules governing the apparent reflectances are the same as those that would emerge from the Kubelka-Munk theory. For chromatic translucency, the relationships are more complex, but a set of rules still emerge from the partitive-mixture theory that are invariant to tradeoffs between illuminant and reflectances. This column sets forth the rules in the hopes that they will have graphical applications, both on computer VDUs and in hardcopy.