The effect of temperature on the removal of non-ionic surfactants during small-scale activated-sludge sewage treatment—I. Comparison of alcohol ethoxylates with a branched-chain alkyl phenol ethoxylate

The degree of biodegradability of three non-ionic surfactants has been assessed using small-scale activated-sludge sewage treatment plants. The effect of temperature on biodegradability was studied by operation at 15°, 11° and 8°C.The two alcohol ethoxylate surfactants tested were well degraded at all three operating temperatures. The alkyl phenol ethoxylate surfactant tested was well degraded at 15°C but at lower temperatures the biodegradability was dependent on concentration. At 5 mg 1⁻¹, greater than 90 per cent removal was achieved but at 20 mg 1⁻¹ the degree of removal fluctuated between 40 and 95 per cent at 11°C and between 20 and 80 per cent at 8°C.The present results have been compared with those obtained using the same surfactants in community trials at a small sewage works employing biological filtration. Although a similar temperature effect was observed with the alkyl phenol ethoxylate, the biodegradabilities obtained in the laboratory were consistently greater than those obtained at the sewage works, perhaps because of the constant conditions of the laboratory test.     

Interstitial inorganic phosphorus concentrations in lakes Mendota and Wingra

Interstitial P levels in Lake Mendota and Lake Wingra were evaluated as a function of season and water column and sediment depth. Interstitial water was obtained by the centrifugation-filtration method. Temporal variations were observed over the entire 15 cm sediment depth interval examined in all four locations evaluated. Interstitial reactive P (IRP) levels in Lake Mendota ranged from 0.014–1.67 mg l⁻¹ at the 5–6 m water column depth and from 1.20–5.75 mg l⁻¹ at the 18–19.5 m depth. IRP levels in Lake Wingra ranged from 0.029–2.15 mg l⁻¹ at 3.5 m and from 0.191–3.96 mg l⁻¹ at 2 m. Variations in interstitial P were attributed to variations in oxidation state of Fe as influenced by oxygen transport and reduction rates.     

Oscillations of Foundations Installed on the Ground and Cast-in-Place Piles Subject to Kinematic Effects

Results are presented for experimental investigations on the traffic-induced oscillations of two full-scale foundations of a metallic tunnel, one of which is installed directly on the ground, and the other on cast-in-place piles. The foundations are close to one another with respect to mass and the load applied to them. Differences are revealed between the parameters of the actual oscillations of these foundations and their computed values.     

Features of disinfection kinetics of water containing <Emphasis Type="Italic">Escherichia Coli</Emphasis> in conditions of hydrodynamic cavitation

The paper has investigated the disinfecting effect of hydrodynamic cavitation on the microorganisms of E. coli in water. It has been found that disinfection kinetics depend on the intensity of the hydrodynamic cavitation field, the microbial load, and gas content. We have studied structure and morphology variation of the E. coli bacteria. It has been demonstrated that the antimicrobial effect is achieved owing to the physicochemical effects of the cavitation field, under whose influence there occurs mechanical destruction of cells and chemical disinfection by the radicals of hydroxyl and hydrogen peroxide.     

Upgrading the Activated-Sludge Process for Total Nitrogen Removal in Hong Kong

In order to protect the sensitive waters in Tolo harbour (Hong Kong), Sha Tin and Tai Po sewage-treatment works were first designed to remove 70% of the nitrogen load from the sewage. Since then, due to continuing serious eutrophication problems in the harbour, both plants have been modified to increase the removal efficiency to 90%.
The modifications were based on the Bardenpho process. However, the designers of the two plants adopted different approaches to process intensity, complexity and control of bacterial foam. At Sha Tin, the average monthly results have shown an increase of total nitrogen removal from 60–70% to about 80% since its completion. The addition of methanol was found to be ineffective on further enhancement of the denitrification rate due to difficulties in the apportioning of the second anoxic zone. The overall monthly results for Tai Po have also shown an increase in the removal rate to about 80%, even though 90% was achieved for a short period of time. The major problem encountered at the latter plant was that the process design did not provide an effective control on bacterial foaming, which had affected the smooth operation of the process.     

Experience with the preconstruction of thawing of soils in the foundation bed of the main building of the Neryungrinsk state area power plant

Conclusions 1. The scheme that we developed is efficient and ensures thawing over a period of 40–45 days. 2. To accelerate thawing by 8–10 days when using two electric heaters in each hole, it is necessary to raise the heaters by 3–4 m after 25 days and continue thawing. 3. An 8–10-day reduction in the thaw time is also possible by using three 1.25-kW electric heaters in each hole in place of two heaters of the same capacity, installing them at depths of 20, 14, and 8 m from the surface. Taking the results of the experimental work account, the State Institute for Special Design developed a plan for the production preconstruction thawing of soils over a area of 12,380 m². The volume of soil thawed was 324,400 m³. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 3, pp. 7–8. May–June, 1982.     

The collapse of welded aluminium plate girders—an experimental study

Twenty-two tests conducted to study the collapse behaviour of welded aluminium girders are described. The girders are of varying proportions, have transverse or longitudinal web stiffeners and are subjected to different combinations of shear and bending loads. It is observed that, although shear sway mechanisms similar to those for steel girders do develop, the webs of aluminium girders may fracture in the heat affected zones adjacent to the perimeter welds. These fractures develop at some stage during the formation of the collapse mechanism and are the consequence, rather than the cause, of failure. It is shown that the tension field theory, originally developed for steel girders, may overestimate the shear-carrying capacity of aluminium girders and it is concluded that the theory requires some modification before it can be applied with confidence to aluminium girders.     

Central place theory and intercommunity input-output analysis

This paper explores trade hierarchies and interindustry relationships, first in theory, then in the empirical context of a western United States timber economy facing a large reduction in its timber harvest. Principles of central place theory guide construction of a hybrid intercommunity input-output model. A nonsurvey technique for estimating central place trade is developed, and is compared with MRIO methods. The effect of central place dominance on intercommunity multipliers is examined theoretically, as is the nature of feedback linkages in a central place hierarchy. The empirical magnitude of feedback effects is small, and although effects vary in magnitude from community to community, neglect of central place considerations can understate intercommunity sawmill multipliers by as much as 36 percent.     

Hybrid reactor for priority pollutant-trichloroethylene removal

The present study was initiated to explore the potential of a hybrid biological reactor, combining trickling filter (TF) and activated sludge process (ASP), to treat wastewater containing trichloroethylene (TCE) at ambient temperature at different hydraulic retention time (HRT). The biofilm acclimation was achieved in 55-60 days with gradual increase in TCE concentration from 1 mg/l to 100 mg/l with a parallel increase in the concentration of substrate sodium acetate and other nutrients. COD and TCE concentration were taken as prime parameters for monitoring the growth of biofilm. During acclimation COD removal varied between 54.6-97.5% while TCE was removed 72.6-99.9%. HRT study was performed after acclimation. The removal efficiency increased with decreasing flow rate with maximum TCE removal (99.99%) at 6 l/d corresponding to an HRT of 28 h (TF 18 h + ASP 10 h). This was followed by a C:N:P ratio study. A ratio of 100:20:1 led to the sustenance of maximum TCE removal. Maximum TCE removal (99.99%) was observed at a substrate:cosubstrate ratio of 100:1. A pH of 7.4 +/- 0.2 was found to be optimum for degradation. Finally, volatilization losses were estimated to be 18.5%. A mass balance gave an efficiency of 81.51% for biological removal of TCE.