北京地铁TD-LTE系统的干扰分析

介绍了LTE系统在北京地铁范围内进行系统覆盖时,多系统间干扰问题的分析及计算.本文通过北京地铁这样的特殊场景,结合LTE系统的特点,辅以理论分析及现场测试,分析了在多系统（地铁信号系统、其他运营商等）环境下,在大客流、高速度及系统复杂的地下轨道空间内建设并使用LTE系统的方法.     

抗氧剂3114合成反应热力学和动力学的研究

研究了常温溶剂法合成抗氧剂3114反应热力学和动力学过程。控制温度在117±2℃,研究结果表明,反应是零级反应,反应速率常数k=1.91×10-3/min,反应的平衡常数K=138.4(mol/L)-6,反应活化能Ea=1366.2J/mol。     

基于LTE下行多业务传输QoS保证的跨层调度算法

众多资源分配的调度算法中, 有区别地实现不同业务QoS要求的调度策略研究不多。针对此问题, 通过将不同QoS等级和要求加入到调度策略的影响因素中, 提出了一种适用于LTE下行多业务传输的多目标跨层分组调度算法, 并设计了一个用户满意度函数, 用来评价分组调度算法的综合性能。对该算法性能进行了仿真验证, 并同PF算法仿真结果进行比较与分析, 表明该算法能够满足不同业务的QoS要求, 综合性能优于PF算法。     

安钢二炼焦加热集散控制系统

安钢二炼焦焦炉加热控制系统根据蓄热室温度，建立了可靠的数学模型，通过控制加热煤气的压力和烟道废气吸力实现加热的自动控制，并实现参数无纸记录，日报表的自动生成，设备巡检的记录等功能。     

水性UV图案化功能涂膜技术研究

研究了一种新型水性UV涂料制备技术,可得到用传统方法无法获得的图案化涂膜。利用扫描电镜、DSC、凝胶渗透色谱等对该图案化聚合物进行分析表征;考察了不同功能添加剂对涂膜形貌的影响;并讨论了光照时间、光引发剂用量与聚合物相对分子质量间的关系。     

复合形退火的随机聚类算法

为了解决传统聚类算法易陷入局部最优解的问题,提出了一种复合形退火的随机聚类算法。该方法通过在聚类过程中设置退火准则,并且将退火过程中的生成复合形部分引入随机化的复合形节点,从而在加速收敛的过程中实现了较低的算法复杂度。理论分析及仿真实验证明,该方法的聚类效果好于传统的K-均值聚类方法,并且计算复杂度比目前基于人工智能的方法低。     

Chemical analysis of volatiles emitted by Pinus svlvestris after induction by insect oviposition

Gas chromatography – mass spectrometry analyses of the headspace volatiles of Scots pine (Pinus sylvestris) induced by egg deposition of the sawfly Diprion pini were conducted. The odor blend of systemically oviposition-induced pine twigs, attractive for the eulophid egg parasitoid Chrysonotomyia ruforum, was compared to volatiles released by damaged pine twigs (control) that are not attractive for the parasitoid. The mechanical damage inflicted to the control twigs mimicked the damage by a sawfly female prior to egg deposition. The odor blend released by oviposition-induced pine twigs consisted of numerous mono- and sesquiterpenes, which all were also present in the headspace of the artificially damaged control twigs. A quantitative comparison of the volatiles from oviposition-induced twigs and controls revealed that only the amounts of (E)--farnesene were significantly higher in the volatile blend of the oviposition-induced twigs. Volatiles from pine twigs treated with jasmonic acid (JA) also attract the egg parasitoid. No qualitative differences were detected when comparing the composition of the headspace of JA-treated pine twigs with the volatile blend of untreated control twigs. JA-treated pine twigs released significantly higher amounts of (E)--farnesene. However, the JA treatment induced a significant increase of the amount of further terpenoid components. The release of terpenoids by pine after wounding, egg deposition, and JA treatment is discussed with special respect to (E)--farnesene.     

Low-temperature methanol synthesis in a circulating slurry bubble reactor

A circulating slurry bubble reactor was developed to synthesise methanol via methyl formate from the gas mixture of carbon monoxide and hydrogen at low temperature. The strategy for designing and scaling up the bubble reactor involved a preliminary understanding of fluid dynamics in a cold model, continuous operations under industrial conditions and a parallel experiment in an autoclave. Per-pass syngas conversion was investigated during 100-h operations. The axial profile of solid catalyst concentration was measured just before the shutdown and the composition of liquid product was analysed after the shutdown. These results show that the circulating slurry bubble column will become a potential reactor for the commercial process of low-temperature methanol synthesis after the catalyst system has been improved.     

基于形变模型的多视图三维人脸重建

本文提出了基于形变模型的多视图三维人脸重建方法,将人脸形变模型与同一人脸在不同视点下的多幅图像进行匹配,从而重建出具有较强真实感的三维人脸模型。本文将对基于形变模型的多视图三维人脸重建方法进行详细的阐述,并把实验结果与单视图重建出的三维人脸模型进行了对比,从而体现出多视图重建的优势所在。     

A growth mark method for studying growth mechanism of carbon nanotube arrays

A novel and simple growth mark method was developed to make marks during the growth process of carbon nanotube arrays. These marks can be read out under scanning electron microscope or optical microscope. Based on this method, the growth rates at different temperatures and under different acetylene partial pressures were measured, from which the activation energy and the order of reaction were determined. Based on our experimental results, the growth of carbon nanotube arrays in our experimental condition could not be diffusion-limited. The measured activation energy could possibly be attributed to the heterogeneous decomposition of acetylene over the catalyst particle. Furthermore the marked array with special segmental structure may be found some applications in the future.