Delay-time=code division multi-access in frequency-selective channel

A new hybrid multi-access technique, called delay-time/code division multi-access (DT/CDMA), is proposed. Multiplexing is accomplished in both the delay-time domain and code domain. Delay-time division multiplexing is achieved by assigning different cyclic time delays to the same spreading sequence. At a receiver, frequency-domain equalisation, despreading, and demultiplexing are performed simultaneously in the frequency domain. The bit error rate performance when using the proposed DT/CDMA in a frequency-selective Rayleigh fading channel is evaluated by computer simulation.     

Influence of heat treatment on indium-tin-oxide anodes and copper phthalocyanine hole injection layers in organic light-emitting diodes

Modifications of indium-tin-oxide (ITO) and copper phthalocyanine (CuPc) layers by heat treatment aimed at lowering driving voltage in organic light-emitting diodes (OLEDs) are examined. Significant changes were observed in the surface morphology and carrier injection properties of ITO and CuPc layers after annealing at T = 250 °C for 0-60 min in a glove box. In the case of ITO annealing, although the ITO work function gradually decreased and the surface of the ITO layer became smoother than that of an unannealed ITO layer, we observed an appreciable decrease in the driving voltage with an increase in annealing time. In the case of CuPc annealing, on the other hand, we observed deterioration of the OLED's characteristics. All devices demonstrated an increase in driving voltage due to the pronounced crystallization of the CuPc layer.     

Formation of high-purity organic thin films by gas flow deposition and the effect of impurities on device characteristics

A gas flow deposition (GFD) system was developed to manufacture large-scale organic light-emitting diodes (OLEDs). A N,N′-di(1-naphthyl)-N,N′-diphenylbenzidine (α-NPD) thin film with a high purity of 99.97% was obtained using the GFD system. The film properties such as morphology, and electrical and optical characteristics were almost the same as those of films made by conventional vacuum thermal evaporation.     

Highly photostable distributed-feedback polymer waveguide blue laser using spirobifluorene derivatives

In this study, we synthesized the new spirobifluorene derivatives; hexylbiphenyl-spirobifluorene (HBP-Spiro) and triphenylamine-spirobifluorene (TPA-Spiro) and demonstrated the operation of a distributed-feedback polymer waveguide blue laser. In addition, we investigated the optical and lasing properties of spirobifluorene derivatives including photostability. The experimental slope efficiency and the energy threshold of a HBP-Spiro-doped waveguide laser were 3.6% and 1.9 μJ, respectively. An operation lifetime of 27,000 shots was obtained for a pump-pulse duration of 1.2 ns and energy of 3.0 μJ at a wavelength of 355 nm.     

Deposition and structural analyses of molybdenum-disulfide (MoS2)–amorphous hydrogenated carbon (a-C:H) composite coatings

In this study we developed composite coatings consisting of amorphous hydrogenated carbon (a-C:H) and molybdenum-disulfide (MoS₂), and clarified their microstructure. In addition, we interpreted the tribological properties of the composite coatings in the viewpoint of a deposition-induced microstructural modification. The coatings were produced by the hybrid deposition technique of RF-generated methane and argon plasma and DC magnetron co-sputtering of MoS₂ target. The deposition parameter investigated in this study was methane flow rate. Structural analyses were performed using a transmission electron microscope (TEM) and an atomic force microscope (AFM). Friction tests were conducted using a ball-on-disk type tribometer. From an electron micrograph, it was confirmed that nano-clusters were embedded into an amorphous carbon host matrix. Surface roughness of the composite coating was ～ 0.25 nm in R_a compared to 5.0 nm in R_a of sputtered MoS₂. The concentration measurements were performed, and the results show that the sulfur and molybdenum concentration ratio, [S]/[Mo], is ～ 0.9, which indicates that the amount of sulfur was reduced due to the discharged plasma. In friction tests, composite coatings showed high friction in a vacuum condition. It was considered that lubricant MoS₂ lamellar structures showing super-low friction in a vacuum condition during friction could not be formed between ball and coating during friction because of the lack of sulfur in embedded clusters.     

Analysis of a gyroscopic force measuring system in three-dimensional space

This paper concerns the development of an entirely new sensor for measuring forces using a gyroscope (called gyroscopic force measuring system, or simply GFMS) for measuring a force vectorially. In a previous paper [S. Kurosu, M. Adachi, K. Kamimura, Dynamical characteristics of gyroscopic weight measuring device, ASME J. Dynamic System Measurement, and Control 119 (1997) 346–350], the dynamics of the GFMS for measuring a vertical force were investigated and the principal characteristics were examined theoretically and experimentally. The results of this work are directly applicable to measurement of a vectorial force in three-dimensional space. The principle and the dynamical characteristics of the GFMS for measuring a force vector are analyzed theoretically. To measure a force vectorially, two auxiliary turntables (driven by servomechanisms) are installed around the gyroscope, in which turntable outputs are required to follow some angles of incidence of a force vector. Some unfavorable errors caused by various factors and disturbances are analyzed. Two types of compensation methods are proposed as a device both for accurate force measurement and disturbance suppression. The feasibility of the proposed GFMS is confirmed by numerical simulations.     

New clustering approach to chip floorplan using functional data

An approach to chip floorplanning utilising hierarchical and functional information derived using LSI logic design is described. The proposed approach adopts a methodological design process similar to that of expert designers. A new clustering method that can be divided into three phases, namely clustering, cluster classification and placement, is employed in this process. The prototype system is implemented based on AI techniques.     

1.8-V 800-Mb/s/pin DDR2 and 2.5-V 400-Mb/s/pin DDR1 compatibly designed 1Gb SDRAM with dual-clock input-latch scheme and hybrid multi-oxide output buffer

This paper describes three circuit techniques for a DDR1/DDR2-compatible chip architecture designed for both high-speed and high-density DRAMs: 1) a dual-clock input-latch scheme, which reduces the excessive timing margin for random input commands by using a pair of latch circuits controlled by dual-phase one-shot clock signals, achieves a 0.9-ns reduction in cycle time from 3.05 to 2.15 ns; 2) a hybrid multi-oxide output buffer reduces the area penalty of the output buffer caused by compatible chip design from 1.35% to 0.3%; and 3) a quasi-shielded distributed data transfer scheme enables a 2.6-ns reduction in access time to 10.25 ns in both 2-b and 4-b prefetch operations. By using these techniques, we developed a 175.3-mm/sup 2/ 1-Gb SDRAM that operates as an 800-Mb/s/pin DDR2 or 400-Mb/s/pin DDR1.     

Valence Band Structure of ZnO (1010) Surface by Cluster Calculation

Discrete variational (DV) Xα cluster method has been employed in calculating electronic structures of ZnO. Electronic structures of the bulk and the non-polar surface model clusters are calculated with inclusion of electrostatic potentials in the bulk and near the surface, and the electronic origins of experimental spectra and chemical bonds at the surface are examined in detail. The valence band structure constructed by Zn-3d and O-2p bands is much influenced by electrostatic potentials in ZnO. It is found that the reduction of an electrostatic potential near the surface gives rise to the difference of the valence band structures between in the bulk and at the surface. The calculated density of states at the non-polar surface of ZnO, where the Zn-3d and O-2p bands are more widely separated than in the bulk, is in good agreement with the experimental UPS. In addition, a Zn-O bond at the surface is found to show stronger covalency than that in the bulk, as a result of the change of the valence band structure due to the effect of the electrostatic potential.     

Single-fluorophore imaging with an unmodified epifluorescence microscope and conventional video camera

Single fluorophores in aqueous solution were imaged in real time with a conventional silicon-intensified target video camera connected to an unmodified commercial microscope (IX70, Olympus) with epifluorescence excitation with a high-pressure mercury lamp. Neither a powerful laser nor an extremely sensitive video camera was required. Three experimental systems were used to demonstrate quantitatively that individual, moving or stationary Cy3 fluorophores could be imaged with the microscope: Cy3-gelsolin attached to an actin filament sliding over heavy meromyosin, sliding actin filaments sparsely labelled with Cy3, and heavy meromyosin labelled with one or two Cy3 fluorophores. The results should encourage many laboratories to attempt 'single-molecule physiology' in which the functions and mechanisms of molecular machines are studied at the single-molecule level in an environment where the biological machines are fully active.