Three patients with insulin-treated diabetes and senile dementia of Alzheimer''s type

Caught between the successes of modern psychopharmacology, the requests of suffering patients for quick relief, and the shortsightedness of many third-party payers, psychodynamic psychotherapy might seem to be on the ropes. It is, however, thriving and providing crucial help to many individuals for whom medication and brief counseling are insufficient. Meanwhile, many more who could benefit from psychotherapy do not have an opportunity to do so. Although psychodynamic psychotherapy originated and developed within a medical framework, it has minimal visibility on the current medical scene, and many physicians have been provided with little meaningful information about it. This article is intended to give physicians a general idea of what psychodynamic psychotherapy is and how it works.     

Effects of pre-ageing and cold working on grain-interior and grain-boundary reactions of Ag-Pd-Cu alloys

The effects of pre-ageing and cold working on grain-interior and grain-boundary reactions of Ag-Pd-Cu alloys were investigated by electrical resistivity measurements, hardness tests, and optical microscopic observations. Hardness values of the grain interior after the final thermomechanical treatment increased 20%–30% above the values after conventional ageing. The hardness values of alloys preaged at 400°C for 1 min and then cold worked at 30% are the highest (H_v=320).     

Reverse osmosis rejection by hydrous inorganic precipitate–cellulose composite membrane

Composit membranes were prepared by impregnating hydrous inorganic precipites (Fe and Cr oxides, nickel chromate or molybdate) into a cellulose acetate membrane which serves as a support. In these membranes, the hydrous iron oxide composite membrane showed high reverse osmosis properties. The permeability of the composite membrane did not decline with time, and the rejection of organic solute was not appreciably affected by impregnation. However, the rejection of electrolyte increased with impregnation. The measurements of membrane potential revealed that salt rejection is primarily attributable to the effect of membrane charge, i.e., to ion exclusion effect. In electrolyte solutions of 1:1 and 2:1, the membrane was anion selective; on the other hand, in electrolyte solution of 1:2, the membrane was cation selective. These results are characteristic of impregnated hydrous metal oxide.     

Transient response of cylindrical shells to localized heat sources

An exact analysis of the dynamic problem on the thermal displacements and stresses of cylindrical shells subjected to instantaneous heating is carried out. Equations of motion for cylindrical shells, including the thermal effects, are reduced and solved by using the Fourier and Laplace transformation methods, after obtaining the temperature distribution determined from the nonstationary equation of heat conduction for a shell under a prescribed temperature field. Numerical results are presented for the thermal displacement and stresses due to the time variation together with the quasistatic ones.     

Optical quality GaInAs grown by molecular beam epitaxy

Ga₄₇In₅₃As films have been grown by molecular beam epitaxy (MBE) on InP substrates. The unintentionally doped material has a free electron concentration of 8 × 10¹⁵cm^-3 and exhibits sharp (~5 meV linewidth) exciton recombination in the 4K photoluminescence. The films were grown on (100) InP surfaces which were thermally cleaned in the arsenic beam. The effects of the substrate temperature during growth, the Ga to In flux ratio and the group V to group III flux ratio on the 4K photoluminescence are reported.     

Modulation of the sensitive temperature range of fluorescent molecular thermometers based on thermoresponsive polymers

Fluorescent molecular thermometers based on polymers showing a temperature-induced phase transition and labeled with polarity-sensitive fluorescent benzofurazans are the most sensitive known. Here we show a simple and effective method for modulating the sensitive temperature ranges of fluorescent molecular thermometers based on such temperature-responsive polymers. 4-N-(2-acryloyloxyethyl)-N-methylamino-7-N,N-dimethylaminosulfonyl-2,1,3-benzoxadiazole was adopted as a polarity-sensitive fluorescent benzofurazan, and nine copolymers of two kinds of acrylamide derivative (N-n-propylacrylamide, N-isopropylacrylamide, and/or N-isopropylmethacrylamide) with a small amount of DBD-AE were obtained. The fluorescence intensities of these copolymers in aqueous solution sharply increased with increasing temperature over a small range (6-7 degrees C). In contrast, these fluorescent molecular thermometers differed from one another in the sensitive temperature range (between 20 and 49 degrees C). Moreover, the sensitive temperature ranges were well related to the acrylamide ratios in feed. In addition, the responses from these fluorescent molecular thermometers to the change in temperature were reversible and exactly repeatable during 10 cycles of heating and cooling (relative standard deviation of the fluorescence intensity, 0.44-1.0%).     

Membranes prepared from keratin–polyacrylonitrile graft copolymers

Graft copolymerization of acrylonitrile onto a soluble wool keratin derivative was studied with the reduced and carboxymethylated low-sulfur protein fraction from wool. Copolymerization was carried out under a variety of conditions with a redox system of (NH₄)₂S₂O₈–Na₂SO₃ in 60% (w/w) aqueous ZnCl₂ solution at 10°C. Monomer conversions higher than 90% were obtained by the stepwise addition of initiator. The graft products were successfully separated into grafted copolymer and homopolyacrylonitrile (PAN) by fractional precipitation or solvent extraction with DMF. Grafted PAN were isolated by acid hydrolysis of the keratin backbone. Characterization of grafted and homo-PAN was carried out by IR spectroscopy, amino acid endgroup analysis, and viscometry. On the basis of the results, effects of polymerization conditions on grafting parameters were discussed. Membranes were prepared from 60% aqueous ZnCl₂ solution by using ice-cold water as the regenerating medium. All the membranes formed from the graft products were transparent. Observation by scanning electron microscopy showed that the surface consisted of rather spherical keratin domains regularly distributed in the PAN matrix. Selective hydrolysis of the keratin domains allowed a new type of porous PAN membrane to be obtained, with the inner walls of the pores being charged with amino acid residues attached to PAN chains as the endgroup.     

Internal oxidation in gold alloys containing small amounts of Fe and Sn

Internal oxidation was observed in gold-rich alloys as substrates for porcelain veneers in dental restorations, which contain small amounts of Fe and Sn. The internal oxidation proceeded with oxygen ions diffusing to the inner part of the alloy through Fe₂O₃ formed at the grain boundaries of the alloy matrix. SnO₂ was formed internally together with the Fe₂O₃. The external oxidation zone was composed of only Fe₂O₃ in a wide range of Fe and Sn concentrations. Fe₃O₄ was formed with Fe₂O₃ in the Sn-rich composition range by reduction of Fe₂O₃ in the presence of Sn. A band mainly composed of SnO₂ was formed at the inside of the internal oxidation zone in the composition range where Fe₃O₄ formed. In the Sn-rich alloys this internal oxidation band of SnO₂ moved to the external oxidation zone.     

Schmelzlinienbestimmungsmodell zur vergleichenden Leistungsbeurteilung von Hochofenperioden

Vergleich von Hochofenbetriebsergebnissen mittels Leistungs-Faktor-Definition. Bestimmung der Lage und Form der Schmelzlinie im Hochofen durch Betriebsdaten. Wärmeeinbringen durch Blasform und deren Übertragung durch Konvektion und Strahlung. Einfluß der Wärmebedingungen im Unterofen auf die Lage der Schmelzlinie. Vergleich und Überprüfung der Modellprofile durch Betriebsmessungen. Einfluß verschiedener Unterofenparameter auf Hochofenbetrieb und Schmelzlinie. Schmelzgeschwindigkeit bei W- und ∧-Profilen in Abhängigkeit der Strahlungstemperatur. Untere kritische Höhenlage der Schmelzlinie und dynamisches Verhalten der Schmelzlinie.