The changes of chemical composition of microencapsulated roselle (Hibiscus sabdariffa L.) seed oil by co-extrusion during accelerated storage

Roselle seed oil (RSO) is an underutilised seed oil, which is having beneficial properties to humans. Microencapsulation of vegetables and seed oil is an alternative to preserve these properties and deliver them to the human diet. In this study, microencapsulation of RSO was performed using co-extrusion technology and 1.5% w/w sodium alginate solution with 1.5% w/w high methoxyl pectin as the wall materials. Results showed that the microencapsulation efficiency was high (95.68 ± 1.95%) and the microencapsulation indeed preserved the content of unsaturated fatty acids, phytosterols, and tocopherols. During an accelerated storage condition at 65 °C for 24 days, most of these properties remained high for the first six storage days, including tocopherol which preserved high γ-tocopherol. Worth noting that the microencapsulated RSO (MRSO) was particularly effective in preserving the total unsaturated fatty acids (especially C18:1 and C18:2), even during the 24th day of storage. The total unsaturated fatty acids retained by MRSO were significantly (P < 0.05) higher (70 ± 0.4%) than the RSO (65.6 ± 1.6%). In short, microencapsulation was effective in preserving the RSO properties.     

An optimal linear and elliptical antenna array design using black widow optimisation for 5G communication

This research illustrates a precise linear and elliptical antenna array design for synthesising the optimal far-field radiation pattern in the fifth-generation (5G) communication spectrum using a meta-heuristic optimisation technique known as black widow optimisation (BWO). 5G communication is an emerging technology with revolutionary changes in the wireless communication system with ultra-high data rate, enhanced capacity, low latency and good quality of service. An accurate antenna array design for an ideal far-field radiation pattern synthesis with a suppressed side lobe level (SLL) value and half power beam width (HPBW) is the most crucial aspect of 5G communications. A suppressed SLL is necessary to reduce interference in the entire side lobe region, whereas a low HPBW is required for long-distance communication. Here, the BWO is employed to find the optimal feeding current to each array element to lower the SLL and the HPBW value. The BWO algorithm sustains impeccable equity between the exploration and exploitation stages to impact different potential regions of the search space and generate new solutions to attain the global optima by evading the trap of local optima. The design examples of the linear antenna array (LAA) and elliptical antenna array (EAA) are illustrated in this article by applying the optimal feeding currents to each array element. Compared to the uniform antenna array and methodologies described in the recently published literature, the results obtained utilising the BWO algorithm for designing the LAAs and EAAs demonstrate a substantial development in the reduction of SLL and HPBW.     

Removal of lead from contaminated water bodies using sea nodule as an adsorbent

Adsorption of water soluble lead on polymetallic sea nodule has been studied in detail. Complete decontamination of lead is possible by appropriate sea nodule dosing. Adsorption is also dependent on pH and best adsorption is achieved at pH 6. Beyond pH 6, the desorption of lead from sea nodule surface is practically zero. Residual metal concentrations in the filtrate after adsorption is negligible. Both Freundlich and Langmuir isotherms may reasonably explain adsorption of lead on sea nodule. Chemically bound moisture plays a very crucial role in lead adsorption. Lead adsorptive capability of sea nodule is practically destroyed when calcined at a temperature of 900 degrees C. Lead loading capacity of sea nodule has been estimated at 440 mg of lead per gram of sea nodule. The performance of sea nodule as a lead adsorbent has been successfully tested over six simulated lead contaminated water systems. Lead loading capacity of sea nodule compares favorably with other adsorbents like activated carbon, ion exchange resin, anionic clay, granulated blast furnace slag and natural and treated zeolites.     

Lead‐Free Polycrystalline Ferroelectric Nanowires with Enhanced Curie Temperature

Ferroelectrics are important technological materials with wide‐ranging applications in electronics, communication, health, and energy. While lead‐based ferroelectrics have remained the predominant mainstay of industry for decades, environmentally friendly lead‐free alternatives are limited due to relatively low Curie temperatures (T _C) and/or high cost in many cases. Efforts have been made to enhance T _C through strain engineering, often involving energy‐intensive and expensive fabrication of thin epitaxial films on lattice‐mismatched substrates. Here, a relatively simple and scalable sol–gel synthesis route to fabricate polycrystalline (Ba_0.85Ca_0.15)(Zr_0.1Ti_0.9)O₃ nanowires within porous templates is presented, with an observed enhancement of T _C up to ≈300 °C as compared to ≈90 °C in the bulk. By combining experiments and theoretical calculations, this effect is attributed to the volume reduction in the template‐grown nanowires that modifies the balance between different structural instabilities. The results offer a cost‐effective solution‐based approach for strain‐tuning in a promising lead‐free ferroelectric system, thus widening their current applicability.     

From technology push,to industrial pull: superplastic forming and diffusion bonding using lasers

The process of Superplastic Forming (SPF) has produced a vast number of components, from simple shapes to those with complex geometric features, all to a dimensional accuracy difficult to obtain by traditional sheet metal methods. When used in conjunction with Diffusion Bonding (DB), extraordinarily lightweight, stiff, strong and fatigue enduring components and structures can be manufactured that are virtually impossible to produce by any other means. However, SPF/DB is often criticised as too complicated, expensive, slow and unstable, a reputation that has contributed to its use being largely confined to manufacturing when no other means of production can be found. Perhaps, the fundamental cause of this negative perception of SPF/DB is the fact that derivatives of mid 18^th century hydraulic presses are used, virtually universally, that provide only a single temperature to the work piece, which is heated primarily through conduction, a form of heating which is slow and expensive. By comparison, modern, electrically efficient, lasers, if used to directly heat the work piece, could transform SPF/DB into a mainstream process and the first choice of designers. This paper compares, and contrasts, the two systems.     

Price elasticity and the growth of computer spending

The price of computers is a key factor in explaining the growth of computer spending. However, it remains unclear whether the price elasticity of the demand for computers is constant over time. Findings on the pattern of price elasticity will have important implications in the study of information technology (IT) innovation diffusion. To test the hypothesis of dynamic price elasticity, we extend existing growth models to include a price factor with different elasticity specifications. Nested specifications of three growth models were tested using spending data from 1955 to 1984 adjusted by a quality price index for computers. The results indicate that three out of four competing models depict dynamic price elasticity over the investigated period. A similar pattern is also observed when the models are estimated using more recent data on mainframe computer spending. Our results underscore the dynamic behavior of price sensitivity in computer spending over time. They offer a new perspective to study innovation attributes and to examine their impacts empirically over time. Implications for information systems (IS) management and IT suppliers are also discussed     

Performance Analysis of Aluminum- and Copper-Rotor Induction Generators Considering Skin and Thermal Effects

Recent progress in wind-power generation has led to the use of grid-connected and self-excited induction generators (SEIGs). Aluminum has been the common conductor material for squirrel-cage induction machines for a long time, largely because of low cost and ease of manufacturing. Recent developments in materials engineering have brought forth copper-rotor induction machines with promising results. In these machines, skin effect as well as temperature effect on the machine equivalent-circuit parameters during operation are expected to play an important role in the evaluation of induction-machine performance. In this paper, a qualitative performance analysis of aluminum- and copper-rotor SEIGs considering the skin and thermal effects has been presented theoretically and experimentally.     

A fault diagnostic method for equipment failures

ABSTRACT

Equipment availability is the most significant factor in the productivity of many mines and processing plants. Machine breakdowns are not only expensive in terms of production losses but also important in meeting production schedules. In the case of an equipment breakdown, a large portion of the downtime is spent in locating the fault. For this reason, it is felt that an automated method is needed to assist the operator in the diagnostic process. In this paper, a diagnostic procedure is developed by modelling the partially known or imprecise relations and poorly defined variables found in a diagnostic environment. A diagnostic algorithm which relates the possible causes of a failure to their respective symptoms through fuzzy logic paths is presented. Application of the algorithm is illustrated by a simple example.