Impact of the Boeing 767 Aircraft into the World Trade Center

A numerical simulation of the aircraft impact into the exterior columns of the World Trade Center (WTC) was done using LS-DYNA. For simplification, the fuselage was modeled as a thin-walled cylinder, the wings were modeled as box beams with a fuel pocket, and the engines were represented as rigid cylinders. The exterior columns of the WTC were represented as box beams. Actual masses, material properties and dimensions of the Boeing 767 aircraft and the exterior columns of the WTC were used in this analysis. It was found that about 46% of the initial kinetic energy of the aircraft was used to damage columns. The minimum impact velocity of the aircraft to just penetrate the exterior columns would be 130?m/s. It was also found that a Boeing 767 traveling at top speed would not penetrate exterior columns of the WTC if the columns were thicker than 20?mm.     

A multilevel computing architecture for embedded multimedia applications

We have designed a new architecture that simplifies integration of heterogeneous IP for multimedia and streaming applications. The multilevel computing architecture (MLCA) is a template architecture featuring multiple processing units. This template architecture for SOC systems uses superscalar techniques to exploit task-level parallelism among different processing units. It supports a natural programming model that relieves programmers from explicitly synchronizing tasks and communicating data. code transformations that improve application performance are easy to incorporate in compilers for this architecture.     

Associated computational plasticity schemes for nonassociated frictional materials

A new methodology for computational plasticity of nonassociated frictional materials is presented. The new approach is inspired by the micromechanical origins of friction and results in a set of governing equations similar to those of standard associated plasticity. As such, procedures previously developed for associated plasticity are applicable with minor modification. This is illustrated by adaptation of the standard implicit scheme. Moreover, the governing equations can be cast in terms of a variational principle, which after discretization is solved by means of a newly developed second‐order cone programming algorithm. The effects of nonassociativity are discussed with reference to localization of deformations and illustrated by means of a comprehensive set of examples. Copyright © 2012 John Wiley & Sons, Ltd.     

An optimal deployable bandwidth aggregation system

The explosive increase in data demand coupled with the rapid deployment of various wireless access technologies have led to the increase of number of multi-homed or multi-interface enabled devices. Fully exploiting these interfaces has motivated researchers to propose numerous solutions that aggregate their available bandwidths to increase overall throughput and satisfy the end-user’s growing data demand. These solutions, however, do not utilize their interfaces to the maximum without network support, and more importantly, have faced a steep deployment barrier. In this paper, we propose an optimal deployable bandwidth aggregation system (DBAS) for multi-interface enabled devices. We present the DBAS architecture that does not introduce any intermediate hardware, modify current operating systems, modify socket implementations, nor require changes to current applications or legacy servers. The DBAS architecture is designed to automatically estimate the characteristics of applications and dynamically schedule various connections and/or packets to different interfaces. We also formulate our optimal scheduler as a mixed integer programming problem yielding an efficient solution. We evaluate DBAS via implementation on the Windows OS and further verify our results with simulations on NS2. Our evaluation shows that, with current Internet characteristics, DBAS reaches the throughput upper bound with no modifications to legacy servers. It also highlights the significant enhancements in the response time introduced by DBAS, which directly enhances the user experience.     

Impact of variable frequency microwave and rapid thermal sintering on microstructure of inkjet-printed silver nanoparticles

The effect of thermal profile on microstructure is studied in the frame of thin films deposited by inkjet-printing technology. The role of sintering temperature and thermal ramp is particularly investigated. Fast heating ramps exhibit coarse grains and pores, especially when a hybrid microwave curing is performed. This enhanced growth is attributed to the quick activation of densifying sintering regimes without undergoing thermal energy loss at low temperature. Microstructural evolution of various sintered inkjet-printed films is correlated with electrical resistivity and with the Young’s modulus determined by nanoindentation. A strong link between those three parameters is highlighted during experiments giving credit to either a surface or a fully volumetric sintering, according to the process. Sintering is then mainly triggered by surface mass transfer or by grain boundary diffusion. Silver thin films with an electrical resistivity 4–5 times higher than the bulk, has been reached in a few minutes with a Young’s modulus of 38?GPa.     

Retardation of High-Temperature Fuel Ash Corrosion of Fireside Boiler Tubes via Nanoparticles

The high-temperature corrosion rate of boiler tubes was studied as a function of inhibitor concentration, time, and temperature in the absence and presence of fuel ash. Samples of steel tubes were taken from boilers that operate in Northern Baghdad Station for Electric Power Generation. Fuel ash was collected from the boiler combustion chamber, as well. Normal and nano-MgO were used as a corrosion inhibitor in different mixing ratios. A weight loss technique was used to evaluate the corrosion rates, while scanning electron microscopy was used to study the surface morphology. It was seen that corrosion rates increased with both time and temperature, and decreased with the addition of inhibitors. The maximum inhibitor efficiency was 81 %, obtained via using nano-MgO at mixing weight ratio 2:1, 600 °C, and 10 h. The Presence of fuel ash had harmful effects on the steel surface.     

Isolation and characterisation of collagen from the ribbon jellyfish (Chrysaora sp.)

Pepsin‐solubilised collagen from the ribbon jellyfish (Chrysaora sp., morphotype 1) umbrella (JPSC) was isolated and characterised. The yield of collagen varied (9–19%, based on ash‐free dry weight) depending on the amount of pepsin used. Type II collagen was the major component of extracted collagen. The peptide map of JPSC differed from that of standard collagen type II, which indicates their different primary structures. FTIR spectra of JPSC, however, did not differ significantly from those of type II collagen. The T_max of JPSC was 37.38 °C, which is higher than that of other marine collagens. Glycine was the main amino acid in JPSC (320 residues per 1000 residues), followed by glutamic acid, alanine, proline, aspartic acid and hydroxyproline. The isoelectric point of JPSC was 6.64. These results indicate that this jellyfish species has the potential to be a marine source of type II collagen that can be used in place of land‐based sources.     

Resistance of exterior three-dimensional walls to high velocity projectiles

There have been a number of recent civilian deaths due to ammunition from commonly used firearms penetrating exterior walls of residential, public, and commercial buildings. Experimental research was conducted to study the behavior of three-dimensional (3D) exterior walls when subjected to high velocity projectiles or bullets fired from a variety of firearms of different calibers. Four types of firearms were used, namely, a 9 mm gun, a 0.357 Magnum gun, an M16 machine gun, and a 7.62 Clashin Koff machine gun. The size of chips and the depth of penetrations produced by the fired bullets are documented and discussed. It was found that none of the fired bullets penetrated the two reinforced concrete layers of the exterior wall. In conclusion, 3D exterior walls provide an acceptable level of protection from ammunition fired from commonly used firearms.