Characteristic study of N07718 superalloy surface prepared by cold spray

For better performance in erosive–corrosive, wear and other extreme environmental conditions surface properties of metals and alloys are usually altered by different techniques. Amongst the various surface coating techniques cold spraying is a relatively new and less reported method. Coating formation at energy lower than the melting stage of materials brings novelty to this process. In this study surface of UNS No. - N07718 alloy is altered by cold spraying chromium-carbide (nickel-chromium) layer. The microstructure properties of this cold sprayed surface are observed by various characterization techniques and the results are used to study mechanism of coating layer formation by cold spray process. This newly developed cold sprayed surface is found to be eligible for further testing in wear and erosive-corrosive environmental conditions.     

Lanthanide Doped Near Infrared Active Upconversion Nanophosphors: Fundamental Concepts,Synthesis Strategies,and Technological Applications

Near infrared (NIR) light utilization in a range of current technologies has gained huge significance due to its abundance in nature and nondestructive properties. NIR active lanthanide (Ln) doped upconversion nanomaterials synthesized in controlled shape, size, and surface functionality can be combined with various pertinent materials for extensive applications in diverse fields. Upconversion nanophosphors (UCNP) possess unique abilities, such as deep tissue penetration, enhanced photostability, low toxicity, sharp emission peaks, long anti‐Stokes shift, etc., which have bestowed them with prodigious advantages over other conventional luminescent materials. As new generation fluorophores, UCNP have found a wide range of applications in various fields. In this Review, a comprehensive overview of lanthanide doped NIR active UCNP is provided by discussing the fundamental concepts including the different mechanisms proposed for explaining the upconversion processes, followed by the different strategies employed for the synthesis of these materials, and finally the technological applications of UCNP, mainly in the fields of bioimaging, drug delivery, sensing, and photocatalysis by highlighting the recent works in these areas. In addition, a brief note on the applications of UCNP in other fields is also provided along with the summary and future perspectives of these materials.     

Traffic of dynamin within individual Drosophila synaptic boutons relative to compartment-specific markers

Presynaptic terminals contain several specialized compartments, which have been described by electron microscopy. We show in an identified Drosophila neuromuscular synapse that several of these compartments-synaptic vesicle clusters, presynaptic plasma membrane, presynaptic cytosol, and axonal cytoskeleton-labeled by specific reagents may be resolved from one another by laser scanning confocal microscopy. Using a panel of compartment-specific markers and Drosophila shibire(ts1) mutants to trap an intermediate stage in synaptic vesicle recycling, we have examined the localization and redistribution of dynamin within single synaptic varicosities at the larval neuromuscular junction. Our results suggest that dynamin is not a freely diffusible molecule in resting nerve terminals; rather, it appears localized to synaptic sites by association with yet uncharacterized presynaptic components. In shi(ts1) nerve terminals depleted of synaptic vesicles, dynamin is quantitatively redistributed to the plasma membrane. It is not, however, distributed uniformly over presynaptic plasmalemma; instead, fluorescence images show "hot spots" of dynamin on the plasma membrane of vesicle-depleted nerve terminals. We suggest that these dynamin-rich domains may mark the active zones for synaptic vesicle endocytosis first described at the frog neuromuscular junction.     

Effect of shot peening on the fatigue and fracture behaviour of two titanium alloys

The fatigue and fracture behaviour of two titanium alloys, the near-alpha IMI-685 and alpha-beta IMI-318, were studied in the machined and polished (MP) as well as the machined, polished and shot (glass-bead) peened (MPS) conditions. Glass-bead peening reduced the room-temperature as well as the high-temperature (450°C) fatigue life of alloy IMI-685 at high stress amplitudes, _a, approaching the proof stress, _ps, of the material (LCF region). When the applied stress amplitude (0–770 MPa, HCF region) was comparable to the peen-induced peak longitudinal residual stress, _LP, i.e. (_LP/a)=0.92, an improvement in the room-temperature fatigue life of IMI-685 was observed. When the (_LP/a) ratio was less than this value, decreases in the fatigue life were seen. The room-temperature fatigue behaviour of IMI-318 at high stress amplitudes was similar to that of IMI-685. The decrease in the fatigue life of this alloy, at a stress amplitude (770 MPa) where improvement was observed for IMI-685, could be attributed to the higher relaxation of peen-induced residual stresses in IMI-318 compared with IMI-685. Glass-bead peening improved the hightemperature (450°C) fatigue life of IMI-685 at a low stress amplitude (465 MPa; (_a/PS)=0.87). The crack-initiation sites in the MP and the MPS conditions were at the surface for both the alloys. However, fracture in the surface layers of the alloys appeared more brittle in the peened (MPS) rather than in the unpeened (MP) condition.     

Effects of cyclic stressing,heat treatment and shot-peening pressure on the residual stress distribution in two titanium alloys

Using the method of drilling holes, the residual stress distributions were determined in two titanium alloys, IMI-685 and IMI-318, in the machined, polished, shot-peened and cyclically stressed (MPSC) as well as the heat-treated and quenched (HTQ) conditions. In IMI-318, the effect of shot-peening pressure on the residual stress distribution was also studied. Tensile cyclic stressing relaxed the shot-peen induced residual stresses in the longitudinal direction and the extent of relaxation depended on the degree of cyclic softening present in the material. In both alloys, in the post- heat-treated and quenched condition, the residual stresses were tensile in nature. In IMI-318, a decrease in the shot-peening pressure led to residual stresses of lower magnitudes. The peak residual stress was present closer to the surface when the shot-peening pressure was increased.     

Dielectric‐coated conducting curvilinear surface electrostatic model for spacecraft charging applications

In this article, free space capacitance of dielectric‐coated conducting curvilinear surfaces is obtained using method of moments (MOM). The surfaces are discretized using triangular subsections. The curvilinear surfaces are represented by quadratic parametric elements. The MOM based on the pulse basis function and point matching is used. The integrand is divided into a regular and a singular part. The regular part of the integral is numerically evaluated by using the Gaussian quadrature algorithm for triangles. The Duffy transformation is used to evaluate the singular part of the integrals. Computed results are given for the capacitance of the dielectric‐coated conducting cylinder of finite axial length and truncated cone, and compared with the previously published results. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

<Emphasis Type="Italic">New-Age</Emphasis>: A Negative Bias Temperature Instability-Estimation Framework for Microarchitectural Components

Degradation of device parameters over the lifetime of a system is emerging as a significant threat to system reliability. Among the aging mechanisms, wearout resulting from Negative Bias Temperature Instability (NBTI) is of particular concern in deep submicron technology generations. While there has been significant effort at the device and circuit level to model and characterize the impact of NBTI, the analysis of NBTI’s impact at the architectural level is still at its infancy. To facilitate architectural level aging analysis, a tool capable of evaluating NBTI vulnerabilities early in the design cycle has been developed that evaluates timing degradation due to NBTI. The tool includes workload-based temperature and performance degradation analysis across a variety of technologies and operating conditions, revealing a complex interplay between factors influencing NBTI timing degradation.     

Spectral characterization and ASTER-based lithological mapping of an ophiolite complex: A case study from Neyriz ophiolite, SW Iran

The Neyriz ophiolite occurs along the Zagros suture zone in SW Iran, and is part of a 3000-km obduction belt thrusting over the edge of the Arabian continent during the late Cretaceous. This complex typically consists of altered dunites and peridotites, layered and massive gabbros, sheeted dykes and pillow lavas, and a thick sequence of radiolarites. Reflectance and emittance spectra of Neyriz ophiolite rock samples were measured in the laboratory and their spectra were used as endmembers in a spectral feature fitting (SFF) algorithm. Laboratory spectral reflectance measurements of field samples showed that in the visible through shortwave infrared (VNIR-SWIR) wavelength region the ultramafic and gabbroic rocks are characterized by ferrous-iron and Fe, MgOH spectral features, and the pillow lavas and radiolarites are characterized by spectral features of ferric-iron and AlOH. The laboratory spectral emittance spectra also revealed a wide wavelength range of SiO spectral features for the ophiolite rock units. After continuum removal of the spectra, the SFF classification method was applied to the VNIR + SWIR 9-band stack, and to the 11-band data set of SWIR and TIR data sets of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) sensor, using field spectra as training sets for evaluating the potential of these data sets in discriminating ophiolite rock units. Output results were compared with the geological map of the area and field observations, and were assessed by the use of confusion matrices. The assessment showed, in terms of kappa coefficient, that the SFF classification method with continuum removal applied to the SWIR data achieved excellent results, which were distinctively better than those obtained using VNIR + SWIR data and TIR data alone.