Influence of Syzygium cumini leaves extract on morphological,thermal, mechanical,and antimicrobial properties of PVA and PVA/chitosan blend films

In the present work, poly(vinyl alcohol)/Syzygium cumini leaves extract (PSN) and poly(vinyl alcohol)/chitosan/S. cumini leaves extract blend films were prepared by solution casting technique. The films were characterized by using scanning electron microscopy, atomic force microscopy, X‐ray diffraction study, Fourier transform infrared spectroscopy, thermogravimetric analysis, and universal testing machine. The results indicated that the appreciable physical interaction at lower concentrations of S. cumini leaves extract in the PVA and PVA/chitosan films contribute to the smooth uniform morphology, increased the degree of crystallinity, degradation temperature, and improved mechanical properties. Further, films were analyzed with water contact angle analyzer which illustrates that blend films were hydrophilic (PSN‐1) and hydrophobic (PCS‐1) in nature. However, blend films were also subjected to the antimicrobial study, which revealed that inclusion of S. cumini leaves extracts significantly enhanced the antibacterial activity in the PVA and PVA/chitosan film. With all of these results, fabricated blends can find potential applications in packaging material to extend the shelf life of foodstuffs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46188.     

Disk Lubricant Additives,A20H and C2: Characteristics and Chemistry in the Disk Environment

Disk lubricant additives A20H and C2 are Fomblin Z type perfluoropolyether with the hydroxyl end-group, –O–CF₂–CH₂–OH, at one end, and the cyclo-triphosphazene end-group, R₅(PN)₃–O–, at the other end. Here, R is an m-trifluoromethyl-phenoxy group for A20H and a trifluoroethoxy group for C2. These additives were examined for miscibility with benzene, spin-off rate, water contact angle, and the diffusion rate over the carbon overcoat. It is revealed that A20H adheres to the carbon overcoat spontaneously. The attractive interaction arises from the charge–transfer type interaction between the aromatic rings of the phosphazene end and the graphitic regime of the carbon overcoat. No spontaneous adherence occurs between the lubricant C2 and the carbon overcoat. A TOF-SIMS study of disks coated with A20H and C2, respectively, with and without subsequent curing by short-UV (185 nm) was performed. It is revealed: (1) if presented with a low energy electron, the phenoxy groups of A20H readily undergo the dissociative electron capture, while the trifluoroethoxy group does not, and (2) photoelectrons generated by short-UV have little kinetic energy and the electron capture occurs only if an electrophilic molecular sector is in intimate contact with the carbon. Thus, in the case of disks coated with A20H, UV-curing results in detachment of a phenoxy group in contact with the carbon, generation of a radical center at the phosphorus atom and subsequent formation of a bona fide chemical bond between the phosphor and the carbon overcoat. No reaction of consequence occurs when disks coated with C2 are irradiated with short-UV.     

Preparation and applications of novel fluoroalkyl end-capped acrylic acid oligomers/silica nanocomposites-encapsulated fullerenes

Fluoroalkyl end-capped acrylic acid oligomers/fullerenes nanocomposites reacted smoothly with tetraethoxysilane (TEOS) and silica nanoparticles under alkaline conditions to give fluoroalkyl end-capped oligomers/silica composites-encapsulated fullerenes. Interestingly, these isolated fluorinated composites were found to afford nanometer size-controlled colloidal particles with a good dispersibility in a variety of organic solvents including water. More interestingly, these fluorinated silica nanocomposites-encapsulated fullerenes were applied to a new type of surface modification agent, and these nanocomposites were able to disperse well above the poly(methyl methacrylate) films to exhibit not only surface active property imparted by fluorine but also a unique characteristic related to fullerenes in the nanocomposites on the surface, effectively.     

Degradative capacities and bioaugmentation potential of an anaerobic benzene-degrading bacterium strain DN11

Azoarcus sp. strain DN11 is a denitrifying bacterium capable of benzene degradation under anaerobic conditions. The present study evaluated strain DN11 for its application to bioaugmentation of benzene-contaminated underground aquifers. Strain DN11 could grow on benzene, toluene, m-xylene, and benzoate as the sole carbon and energy sources under nitrate-reducing conditions, although o- and p-xylenes were transformed in the presence of toluene. Phenol was not utilized under anaerobic conditions. Kinetic analysis of anaerobic benzene degradation estimated its apparent affinity and inhibition constants to be 0.82 and 11 microM, respectively. Benzene-contaminated groundwater taken from a former coal-distillation plant site was anaerobically incubated in laboratory bottles and supplemented with either inorganic nutrients (nitrogen, phosphorus, and nitrate) alone, or the nutrients plus strain DN11, showing that benzene was significantly degraded only when DN11 was introduced. Denaturing gradient gel electrophoresis of PCR-amplified 16S rRNA gene fragments, and quantitative PCR revealed that DN11 decreased after benzene was degraded. Following the decrease in DN11 16S rRNA gene fragments corresponding to bacteria related to Owenweeksia hongkongensis and Pelotomaculum isophthalicum, appeared as strong bands, suggesting possible metabolic interactions in anaerobic benzene degradation. Results suggest that DN11 is potentially useful for degrading benzene that contaminates underground aquifers at relatively low concentrations.     

Electrical switching of the vortex core in a magnetic disk

A magnetic vortex is a curling magnetic structure realized in a ferromagnetic disk, which is a promising candidate for a memory cell for future non-volatile data-storage devices. Thus, an understanding of the stability and dynamical behaviour of the magnetic vortex is a major requirement for developing magnetic data-storage technology. Since the publication of experimental proof for the existence of a nanometre-scale core with out-of-plane magnetization in a magnetic vortex, the dynamics of vortices have been investigated intensively. However, a way to electrically control the core magnetization, which is a key for constructing a vortex-core memory, has been lacking. Here, we demonstrate the electrical switching of the core magnetization by using the current-driven resonant dynamics of the vortex; the core switching is triggered by a strong dynamic field that is produced locally by a rotational core motion at a high speed of several hundred metres per second. Efficient switching of the vortex core without magnetic-field application is achieved owing to resonance. This opens up the potentiality of a simple magnetic disk as a building block for spintronic devices such as a memory cell where the bit data is stored as the direction of the nanometre-scale core magnetization.     

Role of NADH shuttle system in glucose-induced activation of mitochondrial metabolism and insulin secretion

Glucose metabolism in glycolysis and in mitochondria is pivotal to glucose-induced insulin secretion from pancreatic beta cells. One or more factors derived from glycolysis other than pyruvate appear to be required for the generation of mitochondrial signals that lead to insulin secretion. The electrons of the glycolysis-derived reduced form of nicotinamide adenine dinucleotide (NADH) are transferred to mitochondria through the NADH shuttle system. By abolishing the NADH shuttle function, glucose-induced increases in NADH autofluorescence, mitochondrial membrane potential, and adenosine triphosphate content were reduced and glucose-induced insulin secretion was abrogated. The NADH shuttle evidently couples glycolysis with activation of mitochondrial energy metabolism to trigger insulin secretion.     

House-fly cytochrome P450 CYP6D1: 5' flanking sequences and comparison of alleles

Hepatitis C virus (HCV) is the major cause of non-A, non-B hepatitis worldwide. Current treatments are not curative for most infected individuals, and there is an urgent need for both novel therapeutic agents and small-animal models which can be used to evaluate candidate drugs. A small-animal model of HCV gene expression was developed with recombinant vaccinia virus vectors. VHCV-IRES (internal ribosome entry site) is a recombinant vaccinia viral vector containing the HCV 5' nontranslated region (5'-NTR) and a portion of the HCV core coding region fused to the firefly luciferase gene. Intraperitoneal injection of VHCV-IRES produced high levels of luciferase activity in the livers of BALB/c mice. Antisense oligonucleotides complementary to the HCV 5'-NTR and translation initiation codon regions were then evaluated for their effects on the expression of these target HCV sequences in BALB/c mice infected with the vaccinia virus vector. Treatment of VHCV-IRES-infected mice with 20-base phosphorothioate oligonucleotides complementary to the sequence surrounding the HCV initiation codon (nucleotides 330 to 349) specifically reduced luciferase expression in the livers in a dose-dependent manner. Inhibition of HCV reporter gene expression in this small-animal model suggests that antisense oligonucleotides may provide a novel therapy for treatment of chronic HCV infection.     

Finishing characteristics of brittle materials by ELID-lap grinding using metal-resin bonded wheels

ELID-lap grinding is a method of constant pressure grinding which utilizes an electrically conductive wheel and the electrolytic in-process dressing (ELID) method. This method has the advantage of using micro grain-wheels above #10 000 and also, through simple modification, can be used on existing lap machines. To find the characteristics of metal-resin bonded wheels developed for ELID-lap grinding, experiments on the grinding of brittle materials were performed using wheels with a variety of grain diameters. The wheels used in the experiments were #8000, #120 000 and #3 000 000 metal-resin bonded diamond wheels (#8000 MRB-D, #120 000 MRB-D and #3 000 000 MRB-D wheels). The workpieces were silicon and glass. The results of the experiments showed that stable grinding can be achieved with the #8000 to #3 000 000 MRB-D wheels. With the #3 000 000 MRB-D wheel, very smooth surface finishes were obtained for both silicon (PV 2.8 nm) and glass (PV 2.5 nm). Atomic Force Microscope (AFM) and Scanning Electron Microscope (SEM) observations indicated these surfaces to be very smooth in the order of several nanometers, obtained by mechanical removal using an ultrafine wheel.     

Modeling and robust force control of constrained one-link flexible arms

In this article modeling and robust force control of constrained flexible one-link arms on the basis of a distributed parameter model are discussed. Since the tip of the flexible arm contacts a given constraint surface, a constraint condition should be satisfied. By using the Lagrange multiplier method and the Hamilton's principle, we derive dynamic equations of the joint angle, the vibration of the flexible arm, and the constraint force. The boundary condition of the derived distributed parameter system is related to the contact force and is nonhomogeneous. We introduce a change of variables to derive a homogeneous boundary condition. On the basis of a finite-dimensional modal model of the distributed parameter system, we analyze the stability of the force feedback by using the root locus technique and the compliance control. To compensate the spillover instability an optimal controller with low-pass property and a robust H_∞ controller are constructed. Experiments have been carried out and results confirm that the controllers perform remarkably well. © 1998 John Wiley & Sons, Inc.     

Comparative risk study of hydrogen and gasoline dispensers for vehicles

This paper describes an investigation into the acceptability of installing hydrogen dispensers in public areas based on risk assessments. Because gasoline dispenser risks have been widely accepted for many years, they were used as a benchmark in this study to analyze the risks of hydrogen dispensers. More specifically, we performed risk assessments for both hydrogen and gasoline dispensers and then compared and analyzed the results. We began the process by creating models for both hydrogen and gasoline dispensers that represented their various specifications and elements. Next, potential accident scenarios for each dispenser model were identified by failure mode effect analysis (FMEA) and hazard and operability study (HAZOP). The risks of each scenario were then qualitatively evaluated and the results were organized into risk matrices. By comparing the results of both hydrogen and gasoline dispensers with and without existing safety measures, the appropriateness of their safety measures were validated. Furthermore, by comparing the results of hydrogen and gasoline dispenser safety measures, it was confirmed that the risk levels of the two types were practically equivalent. Therefore, we concluded that the risks involved with installing hydrogen dispensers in public areas can be considered acceptable.