Experiments and simulations of uniaxial ratchetting deformation of Sn–3Ag–0.5Cu and Sn–37Pb solder alloys

This paper discusses uniaxial ratchetting deformation of lead-free solder alloy Sn–3Ag–0.5Cu and lead-containing solder alloy Sn–37Pb, which were subjected to tension–compression loading with several stress amplitudes and stress ratios, minimum stress over maximum stress. First the uniaxial ratchetting tests were conducted with three maximum stresses and four stress ratios. All tests were conducted using cylindrical bulk specimens of the solder alloys at 313 K. The test results show that there are differences in the ratchetting deformation behavior of the two solder alloys; the larger ratchetting strain occurs in the lead-containing solder alloy than in the lead-free solder alloy. The ratchetting deformation was simulated by the dislocation based constitutive model proposed by Estrin et al. (J Eng Mater Technol 118:441, 1996). The evolution equation of the back stress employed in the constitutive model was modified considering a dynamic recovery term. The effect of the modification of the back stress evolution is discussed by comparing the simulations with the corresponding experimental results. The simulations suggest that the recovery term in the kinematic hardening rule plays an important role in fitting the simulation to the experimental results of the ratchetting deformation of the solder alloys.     

Simplified method for determining cadmium concentrations in rice foliage and soil by using a biosensor kit with immunochromatography

BACKGROUND: The behavior of cadmium in ecosystems needs to be monitored because of the human toxicity of this heavy metal. The need recently arose for a simple and quick on‐site test for trace levels of Cd in food and environmental samples. In response, an immunochromatographic assay kit for detecting Cd was manufactured by Kansai Electric Power Co. of Japan. This kit uses the antigen–antibody complex reaction between the Cd–EDTA complex and an anti‐Cd–EDTA antibody and shows the results in terms of the degree of color developed on a test paper. We previously reported the successful use of this kit to determine Cd concentrations in brown rice. Here, we applied the kit to the determination of Cd concentrations in rice foliage and soil. RESULTS: Cadmium in rice foliage was not extracted successfully by the method used for brown rice. However, it was successfully extracted by 0.1 mol L^?1 HCl solution at a rice foliage:HCl ratio of 1:20, and coexisting metals were removed sufficiently by the column treatment. The Cd concentrations determined by immunochromatographic assay were well correlated with the values obtained by acid decomposition and inductively coupled plasma mass spectrometry. The 0.1 mol L^?1 HCl‐extractable Cd concentration in soil was also determined successfully with the kit. CONCLUSION: Approximate Cd concentrations in rice plants and 0.1 mol L^?1 HCl‐extractable Cd concentrations in soil can be monitored easily and quickly by this method at locations where facilities for acid digestion and precision analysis are not available. Copyright © 2009 Society of Chemical Industry     

直流分量电流作CV电缆老化诊断方法的现场运用探讨

介绍在实际敷设电缆时如何有效消除杂散电流以期提高直流分量电流进行ＣＶ电缆老化监测的测试精度。     

Disturbance-free high-speed sinusoidal phase-modulating laser diode interferometer

A surface profiler that incorporates a feedback controller to eliminate external disturbances is proposed and demonstrated. Its overall performance is dependent on the frequency response of the feedback loop. The frequency of the modulating signal strongly influences the response of the feedback controller. When we used the integrating-bucket method, the CCD camera had to be operated at a low-frequency video rate. Our technique uses a CCD camera equipped with an electronic shutter. The shutter function enables us to apply high-speed sinusoidal phase modulation to the conventional integrating-bucket method under the standard video rate.     

Mid-Gap State Formed Inside Mott Gap of 1T-TaS2 Single Crystals and Metal-Insulator Transition

We have measured electrical resistivity, Hall coefficient, thermoelectric power, and magnetization for charge-density wave (CDW) material 1T-TaS₂ single crystals grown by varying the excess sulfur content x _es. We have revealed that a small mid-gap state is formed inside the Mott gap and that anomalous low temperature transport is not governed by the Mott gap state itself but by the mid-gap state. The electric properties of the mid-gap state are modified by increasing x _es (or hole doping), and we have found the insulator-metal transition occurs by hole doping below 60K.     

The modification of ABS resin by introducing metal salts of unsaturated acids

Graft polymerization of methacrylic acid onto ABS resin was carried out using BPO as an initiator in THF solution. Degree of grafting increased with reaction time and reached 35% in 10 hrs. Carboxyl groups were converted to carboxylates (metal salts) by refluxing MAA-g-ABS and the metal acetate in THF. In the solid graft polymers in solid, the infrared absorption of the asymmetrical C= O vibration of the carboxylic acid shifted to lower wavenumbers with increasing metal ion concentration. The absorption peak for the carboxylate anion is shifted to higher wavenumbers with the increase of alkali metal ion concentration, however, for the Mg²⁺ salt, it is shifted to lower wavenumbers. The surface and volume resistivities of the K⁺ and Na⁺ salts of MAA-g-ABS were 9.0 × 10⁹ and 9.5 × 10⁹ at 80% neutralization, respectively, and decreased with alkali metal ion concentration. The electric resistance of Li⁺, Mg²⁺ and Zn²⁺ salts decreased only slightly. The modulus of the K⁺ salt of MAA-g-ABS decreased with neutralization, whereas in Li⁺, Mg²⁺ and Zn²⁺ salts, the modulus increased with increasing metal ion concentration.     

Intra-body data transmission for the personal area network

Intra-body communication is a wireless means of exchanging information within a personal area network (PAN) between wearable electronic sensors and devices. The feasibility of intra-body communication is confirmed through several experiments on signal propagation within the human body, and a human phantom is designed and used to obtain reproducible results over repeated experiments. Based on the results of these experiments, a prototype transmission system is constructed using aluminum electrodes powered by 3 V DC and operating in the 10.7 MHz frequency modulation (FM) band. This prototype is demonstrated to be capable of transmitting analog signals through the human subjects in the presence of external noise. Digital data transmission at 9600 bps is also achieved using newly fabricated 10.7 MHz frequency shift keying (FSK) transmitter and receiver devices. The carrier frequency of 10.7 MHz is the intermediate frequency of FM radio receivers, meaning that the proposed system can make use of a wide selection of inexpensive, commercial radio frequency devices.     

Selective and in-situ determination of carbonate and oxide particles in aqueous solution using laser-induced breakdown spectroscopy (LIBS) for wearable information equipment

Laser-induced breakdown spectroscopy (LIBS) has been applied for quantitative analysis of Al₂O₃, CaCO₃ and MgO particles suspended in water. In the single elemental system, the plasma emission intensities of Al, Ca and Mg were linearly increased with concentration of elements in the range of 1.0×10^?5–1.0×10^?3  M, 1.0×10^?4–2.0×10^?3 M and 8.0×10^?5 –4.0×10^?3 M, respectively. We also investigated the concentration dependence of breakdown spectra for suspended mixtures of Al₂O₃, CaCO₃ and MgO particles. The emission lines, such as Al I, Ca I, Ca II and Mg I, were appeared in the LIBS spectrum simultaneously, and each emission peak could be deconvoluted. The plasma emission intensities of Al, Ca and Mg in the multielemental system were also linearly increased with their concentrations in the range of 1.0×10^?5–1.0×10^?3 M, 1.0×10^?4–2.0×10^?3 M and 4.0×10^?4–2.0×10^?3 M, respectively. LIBS was found to be available for quantitative and qualitative measurement of the concentrations of Al₂O₃, CaCO₃ and MgO particles suspended in water. The present results suggest that LIBS is a potentially useful tool for in-situ analysis on particles composition and concentrations for environmental monitoring by the wearable information equipments.     

A Markov chain Monte Carlo algorithm for bayesian dynamic signature verification

Authentication of handwritten signatures is becoming increasingly important. With a rapid increase in the number of people who access Tablet PCs and PDAs, online signature verification is one of the most promising techniques for signature verification. This paper proposes a new algorithm that performs a Monte Carlo based Bayesian scheme for online signature verification. The new algorithm consists of a learning phase and a testing phase. In the learning phase, semi-parametric models are trained using the Markov Chain Monte Carlo (MCMC) technique to draw posterior samples of the parameters involved. In the testing phase, these samples are used to evaluate the probability that a signature is genuine. The proposed algorithm achieved an EER of 1.2% against the MCYT signature corpus where random forgeries are used for learning and skilled forgeries are used for evaluation. An experimental result is also reported with skilled forgery data for learning.