Modification of cleanup methods for dioxin analysis in green leafy vegetables and comparison of packing methods for a multi-layer silica gel column

To determine polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (Co-PCBs) in green leafy vegetables, the cleanup method was modified, and packing methods for a multi-layer silica gel column were compared in food samples. First, the additional cleanup was examined for a mono-ortho PCBs fraction obtained by alumina column chromatography from spinach extract. Small solids such as rough crystals that remained after concentration of the mono-ortho PCBs fraction were identified as long-chain hydrocarbons from leaf epicuticular wax by GC/MS. Cleanup using an activated carbon silica gel column with n-hexane as the washing solvent was effective. Next, multi-layer silica gel columns packed by wet packing and dry packing were compared using komatsuna, salmon and butter as samples. The columns prepared by both methods gave similar values at each isomeric concentration level and showed similar efficiency with favorable recoveries.     

Osteoclast differentiation and characteristic trabecular bone formation during growth plate destruction in osteoprotegerin-deficient mice

Osteoprotegerin (OPG) is an osteoblast-derived secreted member of the tumour necrosis factor receptor superfamily that inhibits osteoclastogenesis. Mice that are OPG-deficient have severe bone loss, including growth plate cartilage destruction. Using OPG-deficient mice as a useful animal model, we attempted to clarify differentiation and ultrastructural features of osteoclasts located on destructed growth plate cartilage and trabecular bone matrix. In the humerus and femur of OPG homozygous (-/-) mice, adjacent to the growth plate cartilage, bone trabeculae without a calcified cartilage core were characteristically formed at the metaphyseal side of the medullary cavity, which resulted in an irregular chondrocyte distribution and arrangement in growth plate cartilage. During growth plate cartilage destruction, osteoclasts positive for tartrate-resistant acid phosphatase showed unusual localization on both type-II collagen-positive cartilage and type-I collagen-positive trabecular bone matrix at the ossification centre of the epiphyseal/metaphyseal border. Although multinucleated osteoclasts were distributed within open lacunar canals in the growth plate, those on uncalcified cartilage matrix lacked a ruffled border. Facing the calcified cartilage matrix within lacunar canals, osteoclasts showed irregularly formed ruffled borders. After growth plate destruction, a thin bone layer was deposited on the remaining cartilage surfaces by invading osteoblasts. Osteoclasts formed prominent ruffled border structures on bone matrix, deposited on the remaining growth plate cartilage. These results suggest that, in OPG (-/-) mice, terminal osteoclast differentiation requires the presence of newly produced bone matrix, as the coupled phenomenon of bone formation and resorption, as well as osteoblast-derived cytokines.     

Osteoclast differentiation at growth plate cartilage-trabecular bone junction in newborn rat femur

Using 3-day-old newborn rats, we examined the differentiation processes of osteoclasts associated with the destruction of the femoral growth plate cartilage and primary trabecular bone. In the growth plate cartilage, thin mineralized areas were detected solely in the longitudinal septal cartilage matrix in the hypertrophic zone, but the transverse septal cartilage matrix between adjacent chondrocytic lacunae within a row of chondrocytes remained unmineralized. The longitudinal septal cartilage between adjacent rows of chondrocytes appeared to persist, forming the walls of opened lacunar canals. Consistent with the removal of the transverse septal cartilage matrix, the longitudinal canals of opened chondrocytic lacunae were deeply invaded by capillary vessels, mononuclear cells and multinucleated pre-osteoclasts lacking a ruffled border. CD34-positive endothelial cells of capillary vessels deeply penetrated into the transverse septal cartilage matrix facing the medullary cavity and the opened chondrocytic lacunae. ED1-positive monocytes/macrophages were distributed at the chondro-osseous junction, but they were distant from the erosive front of the transverse septa. Tartrate-resistant acid phosphatase-positive multinucleated pre-osteoclasts lacking a ruffled border and differentiated osteoclasts with a ruffled border were localized mainly at two locations: the chondro-osseous junction and the growth front of primary bone trabeculae. Osteoclasts were located on the type-I collagen-positive bone trabeculae close to the growth plate, but they appeared to be distant from the type-II collagen-positive cartilage matrix. Even within opened chondrocytic lacunae, when osteoclasts were distant from the cartilage and bone matrix, they lacked polarized cytoplasmic organization and a ruffled border. The osteoclasts located in the remaining septal cartilage also exhibited neither a ruffled border nor a clear zone. Osteoclasts with a prominent ruffled border and clear zone were located in bone matrix covering the remaining septal cartilage. These results suggest that osteoclasts require hydroxyapatite crystals and bone matrix constituents for ruffled border formation and are not involved in resorption of the unmineralized transverse and mineralized longitudinal septal cartilage without covering bone matrix at the chondro-osseous junction.     

Porcine enamel matrix derivative enhances the formation of reparative dentine and dentine bridges during wound healing of amputated rat molars

We examined the biological effects of porcine enamel matrix derivative (EMD; Emdogain) on the formation of reparative dentine and dentine bridges in rat molars after pulp amputation. The pulp chambers of upper molars of Wistar rats were perforated and the amputated pulp surfaces were directly capped with either EMD or its carrier propylene glycol alginate (PGA) as control. The cavities were then restored with glass-ionomer cement. On post-amputation days 4-30, the dissected maxillae were examined by light and electron microscopy. In PGA-capped pulp, reparative dentine had been formed over the dentine walls under the prepared cavity on day 7 post-amputation and its thickness extended until day 30. On day 30, as well as reparative dentine formation, diffuse calcification had occurred beneath the amputated wound surfaces. Dentine bridge formation under the amputated coronal pulp surface was observed in 18.2% of amputated pulp on day 30. In EMD-capped pulp, reparative dentine had already been formed by odontoblast-like cells over the dentine walls, already on day 4 post-amputation, and its thickness extended until day 30. The Ca and P weight % and Ca/P ratio of reparative dentine matrix were similar to those of pre-existing dentine matrix, and these values were not different between PGA and EMD-capped pulp. Dentine bridge formation was observed in 27.3% of EMD-capped pulp on day 30. Our results suggest that EMD enhances the formation of both reparative dentine and dentine bridges during wound healing of amputated rat molar pulp.     

Synthetic potential of molluscan sulfatases for the library synthesis of regioselectively O-sulfonated D-galacto-sugars

The substrate specificities of three molluscan sulfatases (E.C. 3.1.6.1; snail, abalone, and limpet origins) were investigated with assorted p-nitrophenyl (pNP) di-O-sulfonated beta-D-galactopyranosides and beta-lactosides [3,6-SO(3) Gal (1), 3',6'-SO(3) Lac (2), 4, 6SO(3) Gal (3), 2,6-SO(3) Gal (4), 3,4-SO(3) Gal (5), and 3,6-SO(3) GalNAc (6); Ac, acetyl; Gal, galactose; Lac, lactose] together with mono-O-sulfonated beta-D-galactopyranoside [pNP 3SO(3)-Gal (7)] and tri-O-sulfonated alpha-D-galactopyranoside [2,3,6-SO(3)-alpha-Gal (11)]. Some notable differences between the substrate specificity of the three sulfatases were disclosed; snail sulfatase hydrolyzed the 3O- and 2O-sulfo groups of 1 and 4, respectively, to afford 6SO(3) Gal (9) in high yields, while the abalone enzyme did not act on 4. Only the limpet enzyme could cleave the 3O-sulfo groups of 7 to give pNP beta-galactoside. In contrast, every enzyme could utilize 11 as a good substrate to afford a mixture of 6SO(3)-alpha-Gal (13) and 2,6-SO(3) alpha-Gal (12). None of the enzymes could cleave the O-sulfo groups of 5 and 6, which indicates that a primary 6O-sulfo group tends to promote the enzymatic hydrolysis of O-sulfo groups at the secondary positions.     

Examination of electrostatic potential distribution across an implanted p-n junction by electron holography

In the manufacture of semiconductor microelectronic devices, a p-n junction is formed usually by implanting a high concentration of impurity into a less heavily doped region and then heat annealing. A Si/Si p-n junction test sample has been made following the above practical process and thinned for electron holographic observation by using argon ion-milling. From the reconstructed phase image, the phase shift induced by potential drop across p-n junction can be seen clearly. To characterize quantitatively this potential drop, the mean inner potential V0 of silicon was measured precisely by electron holographic method. By measuring 25 different crystalline silicon spheres with diameter ranging from 40 to 170 nm, an average result of V0 = 12.16 +/- 0.83 V was obtained. By using this V0 value, a quantitative measurement yields the potential drop approximately 0.70 V, which is reasonably consistent with expected Si/Si junction parameter. The thickness of electric dead layer in depletion region produced from this measuring is approximately 20 nm on each sample surface.     

Active anion manipulation for emergence of active functions in the nanoporous crystal 12CaO·7Al<Subscript>2</Subscript>O<Subscript>3</Subscript>: a case study of abundant element strategy

This article reviews our approach to render 12CaO · 7Al₂O₃ (C12A7) electronically active using a new concept of ‘active anion manipulation’, where nanostructures embedded within the C12A7 crystal lattice are intentionally utilized to generate chemically unstable (‘water-free active’) anions. Anionic active oxygen radicals, O⁻ and O₂⁻, are formed efficiently in C12A7 cages under high oxygen activity conditions. The configuration and dynamics of O₂⁻ in cages are revealed by a combination of continuous-wave and pulsed electron paramagnetic resonance (EPR). It is demonstrated that metal-loaded C12A7 is a promising oxidation catalyst for syngas (CO + H₂) formation from methane. Furthermore, the O⁻ ion, the strongest oxidant among active oxygen species, can be extracted from the cage into an external vacuum by applying an electric field with thermal assistance, generating a high-density O⁻ beam in the order of μA cm⁻². In contrast, heat treatment of C12A7 in a hydrogen atmosphere forms H⁻ ions in the cages. The resultant C12A7:H⁻ exhibits a persistent insulator-conductor conversion upon ultraviolet-light or electron-beam irradiation. The irradiation-induced conversion mechanism is examined by first-principle theoretical calculations. Furthermore, the presence of a severely reducing environment causes the complete substitution of electrons for anions in the cages. The resulting C12A7:e⁻, which exhibits excellent stability and an electrical conductivity greater than 100 S cm⁻¹, is regarded as an ‘electride’, an ionic compound in which electrons serve as anions. The C12A7 electride exhibits a high potential for applications involving cold cathode and thermal field electron emissions due to its small work function. Electride fabrication methods suitable for large-scale production via melt processing are described. It is also demonstrated that proton or inert gas ion implantations into C12A7 thin films at elevated temperatures are effective for both H⁻ and electron doping.     

Intermetallic compound formation between lead-free solders (Sn) and Cu or Ni electrodes

A kinetic model based on the principle of maximum degradation rate of the total system free energy, MDR law using thermodynamic data, is proposed and successfully applied to the selection of the first intermetallic compound (IMC) phase in Cu/Sn and Ni/Sn diffusion couples. The first phases predicted with this model for Cu/Sn and Ni/Sn are Cu₆Sn₅ and Ni₃Sn₄, respectively, resulting in good agreement with experimental observations.     

Demonstration of 80-km-Long SMF Transmission on Time-Spread Wavelength-Hopping-Type OCDM With Dispersion Compensators

We demonstrate the novel dispersion compensation for time-spread/wavelength-hop (TS-WH) optical code-division multiplexing (OCDM). The single-mode-fiber transmission, up to 80 km long, on TS-WH OCDM was achieved by a combination of the dispersion-compensated decoder and the multichannel-type dispersion-slope compensator.     

Quadratic cost output feedback control for bilinear systems

This paper considers output feedback control problems for bilinear systems with a quadratic cost function and develops a robust control theory approach. A key point of the approach is to regard once the bilinear term as a term with unknown parameters and then use some robust control synthesis methods. This approach derives two types of nonlinear output feedback controller that guarantee an upper bound for the cost function. Efficiencies of the proposed approach are also demonstrated through a numerical example.