Effect of Cross-linking Density on Creep and Recovery Behavior in Epoxy-Based Shape Memory Polymers (SMEPs) for Structural Applications

Epoxy-based shape memory polymers (SMEPs) are gaining importance in the area of aerospace structures due to their high strength and stiffness which is a primary requirement for an SMEP in structural applications. The understanding of viscoelastic behavior of SMEPs is very essential to assess their shape memory effect. In the present work, three types of SMEPs with varying cross-linking densities were developed by curing an aromatic epoxy resin with aliphatic amines. Glass transition temperature (T _g) was measured for these SMEPs using advanced rheometric expansion system, and from the T _g measurements, a range of temperatures from glassy to rubbery regimes were chosen. At selected temperatures, creep-recovery tests were performed in order to evaluate the viscoelastic behavior of SMEPs and also to investigate the effect of temperature on creep-recovery. Further, a three-parameter viscoelastic model (Zener) was used to fit the data obtained from experiments. Model parameters like moduli of the springs and viscosity of the dashpot were evaluated by curve fitting. Results revealed that Zener model was well suited to describe the viscoelastic behavior of SMEPs as a function of test temperatures.     

Copolymerization of styrene with an α‐olefin via atom transfer radical polymerization

This investigation reports the preparation of styrene–α‐olefinic random copolymers, using 1‐octene as an α‐olefin, via atom transfer radical polymerization. Atom transfer radical copolymerization of styrene with 1‐octene was successfully carried out using phenylethyl bromide as initiator and CuBr as catalyst in combination with N, N, N′, N″, N″‐pentamethyldiethylenetriamine as ligand. The copolymers had controlled molecular weight, narrow dispersity and well‐defined end groups with significant 1‐octene incorporation in the polymer. Incorporation of 1‐octene in the copolymers was confirmed using ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectroscopy. An increase in 1‐octene content in the monomer feed led to an increase in the level of incorporation of the α‐olefin in the copolymer. An increase in the concentration of 1‐octene led to a decrease in the rate of polymerization and an increase in dispersity. The glass transition temperature of the copolymer gradually decreased as the incorporation of 1‐octene increased. Copyright © 2011 Society of Chemical Industry     

A constrained binary knapsack approximation for shortest path network interdiction

A modified shortest path network interdiction model is approximated in this work by a constrained binary knapsack which uses aggregated arc maximum flow as the objective function coefficient. In the modified shortest path network interdiction problem, an attacker selects a path of highest non-detection probability on a network with multiple origins and multiple available targets. A defender allocates a limited number of resources within the geographic region of the network to reduce the maximum network non-detection probability between all origin-target pairs by reducing arc non-detection probabilities and where path non-detection probability is modeled as a product of all arc non-detection probabilities on that path. Traditional decomposition methods to solve the shortest path network interdiction problem are sensitive to problem size and network/regional complexity. The goal of this paper is to develop a method for approximating the regional allocation of defense resources that maintains accuracy while reducing both computational effort and the sensitivity of computation time to network/regional properties. Statistical and spatial analysis methods are utilized to verify approximation performance of the knapsack method in two real-world networks.     

In situ synthesised TiO2 ‐chitosan‐chondroitin 4–sulphate nanocomposites for bone implant applications

The artificial materials for bone implant applications are gaining more importance in the recent years. The series titania‐chitosan‐chondroitin 4–sulphate nanocomposites of three different concentrations (2:1:x, where x ‐ 0.125, 0.25, 0.5) have been synthesised by in situ sol–gel method and characterised by various techniques. The particle size of the nanocomposites ranges from 30–50 nm. The bioactivity, swelling nature, and the antimicrobial nature of the nanocomposites were investigated. The swelling ability and bioactivity of the composites is significantly greater and they possess high zone of inhibition against the microorganisms such as Staphylococcus aureus and Escherichia coli. The cell viability of the nanocomposites were evaluated by using MG‐63 and observed the composites possess high cell viability at low concentration. The excellent bioactivity and biocompatibility makes these nanocomposites a promising biomaterial for bone implant applications.Inspec keywords: titanium compounds, filled polymers, nanocomposites, bone, orthopaedics, biomedical materials, sol‐gel processing, nanofabrication, particle size, swelling, microorganisms, cellular biophysics, nanomedicine, prostheticsOther keywords: in situ synthesised TiO₂ ‐chitosan‐chondroitin 4‐sulphate nanocomposites, bone implant applications, artificial materials, in situ sol‐gel method, particle size, swelling nature, antimicrobial nature, microorganisms, Staphylococcus aureus, Escherichia coli, cell viability, MG‐63, biomaterial, size 30 nm to 50 nm, TiO₂      

Health and wellness monitoring through wearable and ambient sensors: exemplars from home-based care of elderly with mild dementia

Monitoring and timely intervention are extremely important in the continuous management of health and wellness among all segments of the population, but particularly among those with mild dementia. In relation to this, we prescribe three design principles for the construction of services and applications. These are ambient intelligence, service continuity, and micro-context. In this paper, we provide three exemplars from our research and development activities that illustrate the use of these design principles in the construction of services and applications. All the applications are drawn from the field of care for mild dementia patients in their living quarters.     

Nanosilver/hyperbranched polyester (HBPE): synthesis, characterization, and antibacterial activity

HBPE of different generations were synthesized using 4-hydroxybenzoic acid and 2,2′,2″-nitrilotriethanol via the A₂ + B₃ method. The reaction was carried out in a dry nitrogen atmosphere using p-toluene sulfonic acid (p-TSA) as an acid catalyst. The chosen molar ratios of 2,2′,2″-nitrilotriethanol to 4-hydroxybenzoic acid were 1:3, 1:6, and 1:21 for the G₁, G₂, and G₅ generations, respectively. The G₅ stage of HBPE was further coupled with acrylic acid to modify the terminal hydroxyl groups. The resulting products were analyzed using ¹H NMR, ¹³C NMR, FTIR spectroscopy, and GPC. Silver nanoparticles were prepared by a reductive technique using HBPEs of the G₅ generation as the matrix. XRD and TEM analysis indicated the formation of highly spherical and stable nanosilver in the HBPE. The antibacterial activity of the nanosilver/HBPE was evaluated against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacteria.     

Freeze-dried strawberry powder improves lipid profile and lipid peroxidation in women with metabolic syndrome: baseline and post intervention effects

Background  

Strawberry flavonoids are potent antioxidants and anti-inflammatory agents that have been shown to reduce cardiovascular disease risk factors in prospective cohort studies. Effects of strawberry supplementation on metabolic risk factors have not been studied in obese populations. We tested the hypothesis that freeze-dried strawberry powder (FSP) will lower fasting lipids and biomarkers of oxidative stress and inflammation at four weeks compared to baseline. We also tested the tolerability and safety of FSP in subjects with metabolic syndrome. FSP is a concentrated source of polyphenolic flavonoids, fiber and phytosterols.     

Deposition of ZnO Films by Combustion Flame Pyrolysis of Solution Precursors

The structural features, including preferred orientation and surface morphology of zinc oxide (ZnO) films deposited by combustion flame pyrolysis were investigated as a function of process parameters, which include precursor solution concentration, substrate–nozzle (S–N) distance, gas flow rate, and duration of deposition. In this technique, the precursor droplets react within the flame and form a coating on an amorphous silica substrate held in or near the flame. Depending on the process parameters, the state of decomposition at which the precursor arrives on the substrate varies substantially and this in turn dictates the orientation and microstructure of the films.