Raman,photoluminescence analysis on Cu(InAl)Se2 thin films and the fabrication of Cu(InAl)Se2 based thin film solar cells

Cu(InAl)Se₂ (CIAS) thin films have been prepared by chemical bath deposition technique. Thickness of the prepared films has been measured by gravimetric technique. The structure, composition and optical transition as well as bandgap have been estimated by X-ray diffraction, energy dispersive X-ray analysis and spectrophotometer analysis. Raman analysis has been made on the prepared CIAS thin films to assign the fundamental lattice mode and to confirm the films crystallinity and stoichiometry. PL analysis has been carried out to find the effective mass of holes and electron, dielectric constant, the involved defects and their activation energy. Cu(InAl)Se₂-based solar cells with different types of buffer layers such as CdS, CdS:Cu, CdS:In were fabricated. The current and voltage were measured using an optical power meter and an electrometer and the fabricated solar cells were illuminated using 100 mW/cm² white light under AM1 conditions.     

A Tri-Band Frequency Selective Surface (FSS) to Diplex Widely Separated Bands for Millimeter Wave Remote Sensing

A substrate-backed frequency selective surface (FSS) is presented for diplexing the widely separated frequency spectrum centered at 55, 89, and 183 GHz with varying bandwidth for spatial separation in the quasi-optical feed network of the millimeter wave sounder. A unit cell composed of a crossed dipole integrated with a circular ring and loaded inside a square ring is optimized for tri-band frequency response with transmission window at 89 GHz and rejection windows at 55 and 183 GHz. The reflection and transmission losses predicted for the optimized unit cell (728 μm?×?728 μm) composed of dissimilar resonant shapes is less than 0.5 dB for transverse electric (TE) and transverse magnetic (TM) polarizations and wide angle of incidence (0°–45°). The FSS is fabricated on a 175-μm-thick quartz substrate using microfabrication techniques. The transmission characteristics measured with continuous wave (CW) terahertz transmit receive system are in good agreement with the numerical simulations.     

How much does guessing influence recall? Comment on Erdelyi, Finks, and Feigin-Pfau.

M. H. Erdelyi et al (see record 1989-38884-001) present evidence that variations in recall criteria can affect the number of items correctly recalled. In this comment, we (a) describe some procedural differences between their work and the earlier experiments of H. L. Roediger and D. G. Payne (see record 1986-13690-001), (b) note that their large manipulations of recall criteria produced only small effects on the amount recalled, and (c) describe recent research complementing that of Erdelyi et al. We observe that variations in recall criteria have larger effects after a 1-week delay than on an immediate test. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Arsenic adsorption by polyvinyl pyrrolidone K25 coated cassava peel carbon from aqueous solution

Sorption of arsenic from aqueous solution was carried out using polyvinyl pyrrolidone K25 coated cassava peel carbon (PVPCC). Batch experiments were conducted to determine the effect of contact time, initial concentration, pH and desorption. Batch sorption data's were fitted to Lagergren kinetic studies. Column studies were also conducted using PVPCC as adsorbent. The optimized flow rate of 2.5 mL min(-1) and bed height 10 cm were used to determine the effect of metal ion concentration on removal of As(V). BDST model was applied to calculate the adsorption capacity (N(0)) of column. The N(0) value of 2.59 x 10(-5), 4.21 x 10(-5), 4.05 x 10(-5), 4.26 x 10(-5) and 3.2 x 10(-5) mg g(-1) were obtained for 0.5, 1.0, 1.5, 2.0 and 2.5 mg L(-1) of As(V), respectively. The batch sorption proved to be more efficient than the column sorption. The sorption of As(V) and the nature of the adsorbent was examined by Fourier transmission infrared spectroscopy (FTIR) and X-ray diffraction (XRD) studies, respectively.     

Silicon nanowire arrays for label-free detection of DNA

Arrays of highly ordered n-type silicon nanowires (SiNW) are fabricated using complementary metal-oxide semiconductor (CMOS) compatible technology, and their applications in biosensors are investigated. Peptide nucleic acid (PNA) capture probe-functionalized SiNW arrays show a concentration-dependent resistance change upon hybridization to complementary target DNA that is linear over a large dynamic range with a detection limit of 10 fM. As with other SiNW biosensing devices, the sensing mechanism can be understood in terms of the change in charge density at the SiNW surface after hybridization, the so-called "field effect". The SiNW array biosensor discriminates satisfactorily against mismatched target DNA. It is also able to monitor directly the DNA hybridization event in situ and in real time. The SiNW array biosensor described here is ultrasensitive, non-radioactive, and more importantly, label-free, and is of particular importance to the development of gene expression profiling tools and point-of-care applications.     

Effect of surface mechanical attrition treatment (SMAT) on zinc phosphating of steel

The effects of surface mechanical attrition treatment (SMAT) of EN8 steel on the growth of phosphate coatings, morphological features and corrosion resistance of the resultant coatings have been studied. SMAT enabled the formation of a uniform surface profile although the average surface roughness is increased after treatment. SMAT increased the extent of metal dissolution and the rate of growth of phosphate coating. In spite of the similarity in phase composition, the phosphate crystallite size is relatively high for samples treated by SMAT. Compared to the untreated one, a cathodic shift in E_corr with a corresponding decrease in i_corr is observed for SMAT treated EN8 steel after phosphating. For all tested samples, zinc phosphate coatings deposited on EN8 steel after SMAT using 8 mm Ø balls for 30 min offers the highest corrosion resistance. The increase in surface roughness by SMAT is partly compensated by the expected improvement in corrosion resistance.     

In-vitro bioactivity,biocorrosion and antibacterial activity of silicon integrated hydroxyapatite/chitosan composite coating on 316 L stainless steel implants

A simple and effective ultrasonication method was applied for the preparation of 0, 0.4, 0.8, 1.0 and 1.6 wt% silicon substituted hydroxyapatite (HAp) (SH). The Ca/P ratio of the synthesised SH nanoparticles were in the range of 1.58–1.70. Morphological changes were noticed in HAp with respect to the amount of Si from 0 to 1.6 wt%. The morphology of the particles changed from spherical shape to rod-like morphology with respect to the amount of Si which was confirmed using transmission electron microscopy. X-ray diffraction studies confirm the formation of phase pure SH nanoparticles without any secondary phase. Chitosan (CTS) blended SH nanocomposites coating on surgical grade 316 L stainless steel (316 L SS) implant was made by spin coating technique. The surface of the coated implant was characterised using scanning electron microscopy which confirms the uniform coating without cracks and pores. The increased corrosion resistance of the 1.6 wt% of SH/CTS-coated SS implant in the simulated body fluid (SBF) indicates the long-term biostability of SH composite-coated ceramics in vitro than the 0 wt% SH/CTS. The testing of SH/CTS nanocomposites with gram-positive and gram-negative bacterial strains confirms that the antibacterial ability improves with the higher substitution of Si. In addition, formation of bone-like apatite layer on the SH/CTS-coated implant in SBF was studied through SEM analysis and it confirms the ability to increase the HAp formation on the surface of 1.0 wt% SH/CTS-coated 316 L SS implant.     

Analysis of the torsion angle distribution of poly(vinylidene fluoride) in the melt

Analysis of the torsion angle distribution of poly(vinylidene fluoride) (PVDF) structures at temperatures above its melting point is addressed by combining first principles methods, atomistic simulations and laboratory experiments. Amorphous, α- and β-conformations of PVDF structures have been considered. The results from the atomistic simulations as well as the experiments show that there is a larger probability of the PVDF torsions to be near ±180° at temperatures above the melting point, which is associated more with the β-conformation than the α-conformation.     

Molecular dynamics simulations of α- to β-poly(vinylidene fluoride) phase change by stretching and poling

The mechanism of inducing a phase change from α-poly(vinylidene fluoride) (α-PVDF) to β-PVDF is addressed using molecular dynamics simulations based on a molecular mechanics force field. The effect of applying a strain to the α-PVDF crystal along the axis of the molecules is investigated, as well as poling the crystal before or after stretching. Rather large (at least 10¹⁰ V/m) electric fields that are perpendicular to the axis of the PVDF molecules are required to induce α- to β-PVDF phase change when no strain is applied to the α-PVDF crystal. However, at a strain of 1.0475 (i.e., when the crystal is stretched by 4.75%) α-PVDF changes to a β-PVDF like structure, where the β-PVDF molecules orientate anti-parallel relative to each other. Transformation of the anti-parallel β-PVDF to β-PVDF can be induced by poling (even at the lowest electric field of 10⁵ V/m studied here) or by thermal annealing.     

Aerobic soil biodegradation of 8:2 fluorotelomer stearate monoester

A laboratory investigation on the biotransformation of 8:2 fluorotelomer stearate monoester (8:2 FTS) in aerobic soils was conducted by monitoring the loss of 8:2 FTS, production of 8:2 fluorotelomer alcohol (8:2 FTOH) and stearic acid, which would be released by cleavage of the ester linkage, and subsequent degradation products from FTOH for 80 d. Soil microcosms were extracted with ethyl acetate followed by two heated 90/10 v/v acetonitrile/200 mM NaOH extractions. 8:2 FTS was degraded with an observed half-life (t(1/2)) of 10.3 d. The rate of 8:2 FTS biotransformation substantially decreased after 20 d with 22% of 8:2 FTS still remaining on day 80. No biotransformation of 8:2 FTS occurred in autoclaved soil controls, which remained sterile with 102 ± 6% recovery, through day 20. 8:2 FTOH was generated with cleavage of the ester linkage of 8:2 FTS followed by a rapid decline (t(1/2) ~ 2 d) due to subsequent biodegradation. All the expected 8:2 FTOH degradation products were detected including 8:2 fluorotelomer unsaturated and saturated carboxylic acids, 7:2s FTOH, 7:3 acid, and three perfluoroalkyl carboxylic acids with the most prominent being perfluorooctanoic acid (PFOA). PFOA consistently increased over time reaching 1.7 ± 0.07 mol % by day 80. Although cleavage of the ester linkage was evidenced by 8:2 FTOH production, an associated trend in stearic acid concentrations was not clear because of complex fatty acid metabolism dynamics in soil. Further analysis of mass spectrometry fragmentation patterns and chromatography supported the conclusion that hydrolysis of the ester linkage is predominantly the first step in the degradation of 8:2 FTS with the ultimate formation of terminal products such as PFOA.