Safety design

JAERI established the safety design philosophy of the HTTR based on that of current reactors such as LWR in Japan, considering inherent safety features of the HTTR. The strategy of defense in depth was implemented so that the safety engineering functions such as control of reactivity, removal of residual heat and confinement of fission products shall be well performed to ensure safety. However, unlike the LWR, the inherent design features of the high-temperature gas-cooled reactor (HTGR) enables the HTTR meet stringent regulatory criteria without much dependence on active safety systems. On the other hand, the safety in an accident typical to the HTGR such as the depressurization accident initiated by a primary pipe rupture shall be ensured. The safety design philosophy of the HTTR considers these unique features appropriately and is expected to be the basis for future Japanese HTGRs.This paper describes the safety design philosophy and safety evaluation procedure of the HTTR especially focusing on unique considerations to the HTTR. Also, experiences obtained from an HTTR safety review and R&D needs for establishing the safety philosophy for the future HTGRs are reported.     

Study of melting and crystallization behavior of polyacrylonitrile using ultrafast differential scanning calorimetry

The thermal behavior of polyacrylonitrile (PAN) has been investigated using X-ray diffraction, differential scanning calorimetry (DSC), and ultrafast DSC. In conventional DSC, it is difficult to prevent the concurrent occurrence of the exothermic reactions of PAN with melting. However, in the ultrafast DSC curve, the exothermic peak due to these reactions disappears over the temperature range 0–400 °C at heating rates above 250 °C s⁻¹. Alternatively, the glass transition and the melting of PAN are observed over the temperature range 109–129 °C and 335–362 °C, respectively. Moreover, upon cooling from the molten state at a rate of −7500 °C s⁻¹, PAN crystallization is observed at 204 °C. These findings were observed repeatedly during heating and cooling measurements. From the extrapolation analysis, the zero-entropy-production melting temperature of PAN is found to lie in the temperature range 320–350 °C. Finally, the equilibrium melting temperature of PAN is estimated to be ca. 465 °C.     

Synthesis of High-Molecular-Weight [60]Fullerene Pearl-Necklace Polyamides Derived from Equatorial [60]fullerenobisacetic Acid

Abstract

A series of [60]fullerene pearl-necklace polyamides, consisting of equatorial-[60]fullerenobisacetic acid and various chromophoric aromatic diamines, were synthesized by a phosphorylation route using large amounts of triphenyl phosphite and pyridine as condensing reagents with stepwise addition of the condensing reagents. In the present polymers, [60]fullerene pearls and diamine linkers were attached to one another by cyclopropane connectors. The polyamides had weight-average molecular weights (M_w)of 4.5-5.0×10⁴ g/mol and inherent viscosities (n _inh) of 0.3-0.4 dL/g in N, N-dimethylacetamide (DMAc) at 30 °C. They had glass transition temperatures at 30-125 °C and decomposition temperatures at 300-310 °C. The UV-VIS spectra in DMAc exhibited broad absorption with λ_max at 310-390 nm tailing to longer wavelengths.     

Neuroprotection,Growth Factors and BDNF-TrkB Signalling in Retinal Degeneration

Neurotrophic factors play key roles in the development and survival of neurons. The potent neuroprotective effects of neurotrophic factors, including brain-derived neurotrophic factor (BDNF), ciliary neurotrophic factor (CNTF), glial cell-line derived neurotrophic factor (GDNF) and nerve growth factor (NGF), suggest that they are good therapeutic candidates for neurodegenerative diseases. Glaucoma is a neurodegenerative disease of the eye that causes irreversible blindness. It is characterized by damage to the optic nerve, usually due to high intraocular pressure (IOP), and progressive degeneration of retinal neurons called retinal ganglion cells (RGCs). Current therapy for glaucoma focuses on reduction of IOP, but neuroprotection may also be beneficial. BDNF is a powerful neuroprotective agent especially for RGCs. Exogenous application of BDNF to the retina and increased BDNF expression in retinal neurons using viral vector systems are both effective in protecting RGCs from damage. Furthermore, induction of BDNF expression by agents such as valproic acid has also been beneficial in promoting RGC survival. In this review, we discuss the therapeutic potential of neurotrophic factors in retinal diseases and focus on the differential roles of glial and neuronal TrkB in neuroprotection. We also discuss the role of neurotrophic factors in neuroregeneration.     

Strength of spline joints assembled by forming

In this paper, a new assembling method of spline joints that enables tight fitting in a simple manner by allowing slight plastic deformation at the spline teeth was introduced. Experiments were carried out for the spline joints of medium carbon steel varying the overlap zone between the male and the female spline teeth. Axial joining strength was increased with increase in the overlap length due to the residual compressive stress by forming. The joint by the proposed method also showed higher torsional strength than the conventional joint. Improvement in the torsional strength was explained based on the deformation and hardness distribution around the spline teeth. With respect to the shape of overlap zone, better results were obtained when using the specimen having a uniform overlap length along the axial direction.     

Effects of phosphorus content on generation and growth of cracks in nickel–phosphorus platings owing to thermal cycling

We observed crack generation and structural changes in electroless nickel–phosphorus (Ni–P) plating layers formed on copper-metalized silicon nitride substrates both during thermal cycling from ? 40 to 250 °C and during storage (not cycling) at 250 °C in order to investigate the effect of the phosphorus contents on crack generation and growth in the Ni–P platings. The used platings contained phosphorus at three different contents: 2.1 wt% [Ni–P(low)], 6.5 wt% [Ni–P(med)], and 10.9 wt% [Ni–P(high)]. The generation time and the amount of cracks were strongly dependent on their phosphorus contents. More cracks appeared after thermal cycling than after storage at 250 °C. In Ni–P(low), cracks were generated after 200 thermal cycles, whereas no cracks were observed even after 250 h of storage at 250 °C. In Ni–P(med) and Ni–P(high), both during thermal cycling and storage at 250 °C, cracks formed during or after crystallization of the amorphous layers. These results suggest that the primary factors affecting the generation of cracks in electroless Ni–P platings are crystallization of the Ni–P platings and repeated changes in thermal stress.     

Optimum watermark detection of ultrasonic echo medical images

To prevent unauthorized access to a person's medical images, it is widely acknowledged that the security features of confidentiality, availability and integrity should be in place. This paper proposes the watermarking of ultrasonic echo images together with optimal watermark detection, in which pseudorandom noise is added to the images for integrity. The optimum watermark detection is the integration of the generalized Gaussian distribution (ρ‐GGD) and the Cauchy distribution. The results show that the proposed method gives good detection performance. The proposed method not merely achieves optimum detection using the Rao test but also leads to the highest detection probability with JPEG2000 compression. Compared with other detection methods, our proposed method exhibits better watermark detection performance even when the watermark‐to‐document ratio (WDR) is −50 dB. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Structural,electrical and electrochemical properties of polyacrylonitrile-ammonium hexaflurophosphate polymer electrolyte system

Polyacrylonitrile (PAN) based polymer electrolyte membranes complexed with Ammonium hexafluorophosphate (NH₄PF₆) with different molar concentration are prepared by solution casting method. Increase in the amorphous nature by the addition of Ammonium salt and the formation of polymer-salt complex are confirmed by X ray diffraction studies and infrared spectroscopy respectively. The glass transition temperature is measured for all membranes and it showed a lowest value for the PAN complexed with 20 mol% of NH₄PF₆. Electrical properties are studied by AC impedance spectroscopy. An ionic conductivity of the order of 10^?3 Scm^?1 is obtained for the 80 PAN / 20 NH₄PF₆ polymer electrolyte. Conductivity, dielectric and modulus spectra from the impedance data are analysed to understand the ionic transport mechanism. Transference number measurement is done to study the ionic contribution to the charge transport. A proton battery with the configuration, Zn+ ZnSO₄. 7H₂O /80 PAN / 20 NH₄PF₆ / PbO₂ +V₂O₅ has been constructed and its discharge characteristics are studied.