Lateral Inhomogeneity in the Electronic Structure of a Conjugated Poly(3‐hexylthiophene) Thin Film

How annealing influences the morphology of a highly regioregular poly(3‐hexylthiophene) (RR‐P3HT) film at the substrate interface as well as the lateral inhomogeneity in the electronic structure of the film are elucidated. Whereas previous studies have reported that high‐molecular‐weight (MW) RR‐P3HT films tend to show low crystallinity even after annealing, it is found that high‐MW RR‐P3HT does show high crystallinity after annealing at high temperature for a long time. Photoemission electron microscopy (PEEM), X‐ray photoemission spectroscopy, and ultraviolet photoemission spectroscopy results clearly resolve a considerable lateral inhomogeneity in the morphology of RR‐P3HT film, which results in a variation of the electronic structure depending on the local crystallinity. The PEEM results show how annealing facilitates crystal growth in a high‐MW RR‐P3HT film.     

Design of plant safety model in plant enterprise engineering environment

Plant enterprise engineering environment (PEEE) is an approach aiming to manage the plant through its lifecycle. In such environment, safety is considered as the common objective for all activities throughout the plant lifecycle. One approach to achieve plant safety is to embed safety aspects within each function and activity within such environment. One ideal way to enable safety aspects within each automated function is through modeling. This paper proposes a theoretical approach to design plant safety model as integrated with the plant lifecycle model within such environment. Object-oriented modeling approach is used to construct the plant safety model using OO CASE tool on the basis of unified modeling language (UML). Multiple views are defined for plant objects to express static, dynamic, and functional semantics of these objects. Process safety aspects are mapped to each model element and inherited from design to operation stage, as it is naturally embedded within plant's objects. By developing and realizing the plant safety model, safer plant operation can be achieved and plant safety can be assured.     

Dynamic voltage and frequency management for a low-power embedded microprocessor

High-performance and low-power microprocessors are key to PDA applications. A dynamic voltage and frequency management (DVFM) scheme with leakage power compensation effect is introduced in a microprocessor with 128-bit wideband 64-Mb embedded DRAM. The DVFM scheme autonomously controls clock frequency from 8 to 123 MHz in steps of 0.5 MHz and also adaptively controls supply voltage from 0.9 to 1.6 V in steps of 5 mV, achieving 82% power reduction in personal information management scheduler application and 40% power reduction in MPEG4 movie playback. This low-power embedded microprocessor, fabricated with 0.18-/spl mu/m CMOS embedded DRAM technology, enables high-performance operations such as audio and video applications. As process technology shrinks, this adaptive leakage power compensation scheme will become more important in realizing high-performance and low-power mobile consumer applications.     

DOLPHIN: Digital Online Library Providing Human-Like InteractiveNavigation

In a digital library environment, we propose a novel support concept that is like a reference service in real libraries. Based on the concept, we have developed a prototype, called DOLPHIN, using a frame based knowledge base to support reference services in a digital library. DOLPHIN can guide the user to the appropriate service     

Phospholipid polymer hydrogel formed by the photodimerization of cinnamoyl groups in the polymer side chain

We synthesized new polymers with both photocrosslinkability and biocompatibility by a random copolymerization of 4‐(4‐methoxycinnamoyl)phenyl methacrylate and 2‐methacryloyloxyethyl phosphorylcholine. These polymers were used as prepolymers to make a hydrogel by photoirradiation. Gelation began with 5 s of photoirradiation and reached an equilibrium state after 360 s of photoirradiation. The absorption maximum at 347 nm, attributed to the cinnamoyl group, disappeared with the photoirradiation time. That is, dimerization between cinnamoyl groups in the polymer proceeded and formed a hydrogel. The equilibrium water concentration of the hydrogels was more than 90%. Moreover, we succeeded in making a microshape hydrogel on glass by photoirradiation through a photomask. The window shape of the photomask was transferred to the hydrogel that was formed. We concluded that these photocrosslinkable polymers could be useful in preparing microfluidic devices for separating or immobilizing biomolecules and cells. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 44–50, 2007     

Intensely irradiated steel components: Plastic and fracture properties, and a new concept of structural design criteria for assuring the structural integrity

In order to develop a systematic and reasonable concept assuring the structural integrity of components under intense neutron irradiation, two basic tensile properties, true stress-true strain (TS-TS) curves and fracture strain, were investigated on an austenitic stainless steel and martensitic steel. Application of Swift equation is confirmed to a large plastic strain range of TS-TS curves. Fracture strain ?_f data were well correlated as ?_f + ?₀ = const. where ?₀ is the pre-strain representing the irradiation hardening.Based on those formulations and available experimental information, several critical issues to be dealt with in developing the concept were identified possible reduction in ductility, significant change in mechanical properties, remarkable cyclic softening and other unique cyclic properties observed during a high-cycle fatigue testing, and the redundancy of the plastic collapse concept to bending. Existing structural codes are all based on the assumption that there will be no significant changes in mechanical properties during operation, and of high ductility. Therefore, a new concept for assuring structural integrity is required for application not only to components with high ductility but also components with reduced ductility. First, potential failure modes were identified, and a new and systematic concept was proposed for preventing these modes of failure, introducing a new concept of categorizing the loadings by stability of deformation process to fracture (as type F and M loadings). Based on the basic concept, a detailed concept of how to protect against ductile fracture was given, and loading type-dependent limiting parameters were set.Finally, application of the detailed concept was presented, especially on determination of loading type (in numerical approach, the formulation of TS-TS curves and fracture strain derived above are needed), and on how to determine the limiting parameters as allowable limits. Experiments were done to identify the loading type of a tensile loading acting on a structure with a discontinuity. Tensile loadings acting on an intensely neutron-irradiated flat plate with a hole in the center cause plastic tensile instability and necking at the minimum ligament section but do not initiate any surface crack at the initiation of necking.     

Sex differences in audiovisual discrimination learning by Bengalese Finches (Lonchura striata var. domestica).

Both visual and auditory information are important for songbirds, especially in developmental and sexual contexts. To investigate bimodal cognition in songbirds, the authors conducted audiovisual discrimination training in Bengalese finches. The authors used two types of stimulus: an "artificial stimulus," which is a combination of simple figures and sound, and a "biological stimulus," consisting of video images of singing males along with their songs. The authors found that while both sexes predominantly used visual cues in the discrimination tasks, males tended to be more dependent on auditory information for the biological stimulus. Female responses were always dependent on the visual stimulus for both stimulus types. Only males changed their discrimination strategy according to stimulus type. Although males used both visual and auditory cues for the biological stimulus, they responded to the artificial stimulus depending only on visual information, as the females did. These findings suggest a sex difference in innate auditory sensitivity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Zeta potential measurement on the surface of blue-green algae particles for micro-bubble process.

Any kind of blue-green alga produces metabolites of musty substances and toxins. Therefore, it is necessary to remove the blue-green algae, and processing also including nutrient removal is desired for the water quality improvement of eutrophic lakes. The purpose of this study has been to investigate the possibility of a flotation system using a hybrid technique (chemical compounds and electrostatic bridge) applied to raw water containing phytoplankton with high pH of water, and to examine the zeta potential value of phytoplankton surface and the removal efficiency for phytoplankton, ammonia, nitrogen, and phosphoric acid.The results were as follows: firstly, zeta potential of M. aeruginosa particles was observed to achieve charge neutralization on their surface by adhesion of magnesium hydroxide precipitation with increasing pH. Secondly, maximum removal efficiency concerning chlorophyll-a was observed as 84%, and this efficiency was obtained in the condition of pH > 10, and magnesium hydroxide precipitation was observed. Thirdly, in the pH condition that the maximum removal efficiency of chlorophyll-a was obtained, the removal efficiency and the amount of decrease of NH(4)-N and PO(4)-P before and after the change of pH values were observed as 6.7% (0.04 mg-P/L) and 63.6% (0.07 mg-N/L), respectively.     

Rapid sensing of trace ionic substances with the novel porous monolith type ion exchanger

Biological and chemical sensor with a rapid response in microlevel test is required for health and environmental monitor. A novel sensing due to porous ion exchanger with three-dimensional acceptor has been first attempted to develop a high-performance sensor. This porous monolith type ion exchanger has an open-cellular monolith structure with 5–50-μm diameter pores. The trace amount of inorganic ions dissolved in aqueous solutions can be quantitatively determined with the impedance given by the monolith, which attracts and adsorbs the ions rapidly. We have succeeded in detecting ions with a concentration as low as 10⁻⁷ mol. The porous ion exchanger has a potentiality as a high-performance device for biological and chemical sensing. POLYM. ENG. SCI., 47:1666–1670, 2007. © 2007 Society of Plastics Engineers