A PWM signal processing core circuit based on a switched currentintegration technique

A highly functional circuit for pulse width modulation (PWM) signal processing is proposed as a core of the A-D merged circuit architecture for time-domain information processing. The core circuit employs a switched-current integration technique as its computing architecture and functions as a linear arithmetic operator, a memory, and also a delaying device of PWM signals. A 0.8-μm CMOS test chip includes 110 transistors plus two capacitors and performs parallel additions and multiplications at the accuracy of 1.2 ns. A cumulative property of the technique allows the circuit to serve as a low-power accumulator that consumes 23% of the energy of the full digital 7-b accumulator. A PWM multiply-accumulate unit and a nonlinear operation unit are also proposed to extend functionality of the circuit. Since the PWM signal carries multibit data in a binary amplitude pulse, these circuits can be favorably applicable to low-voltage and low-power designs in the deep submicrometer era     

Stability and accuracy of power‐series method for one‐dimensional heat conduction with non‐uniform grid systems

The power‐series method, a finite analytic approach to heat transfer and fluid flow problems that is based on power‐series expansion, was applied to a one‐dimensional heat‐conduction problem to evaluate its stability and accuracy. Application to a specific heat‐conduction problem with non‐uniform grid systems showed that it had stability within the ranges 10⁻⁵<Δt,Δx_E, and Δx_W,a<10⁵, and 10⁻⁵<β<10⁵. Comparison of its solutions with those by the fully implicit and Stefanovic–Stephan methods showed that this method yielded more accurate and robust solutions. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(7): 470–480, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20085     

An On-Chip Multichannel Waveform Monitor for Diagnosis of Systems-on-a-Chip Integration

An on-chip multichannel waveform monitoring technique enhances built-in test and diagnostic capabilities of systems- on-a-chip (SoC) integration. The proposed multichannel monitor includes multiple probing front-end modules and a single shared waveform acquisition kernel that consists of an incremental variable step delay generator and an incremental reference voltage generator, featuring adaptive sample time generation for the operation of a target circuit and unidirectional waveform acquisition flow for area-efficient control. A 16-channel prototype in 0.18-mum CMOS technology demonstrated on-chip waveform acquisition at 40-ps and 200-muV resolutions. Combined on- and off-chip streamed-bit processing achieves background continuous waveform acquisition at 260 ms per single timing point for repetitive signals, while eliminating the integration of on-die high-capacity memory. A 700 mum times 600 mum area was occupied by a waveform acquisition kernel and an additional 60 mum times 100 mum area for each front-end module. The developed on-chip multichannel waveform monitoring technique is waveform accurate, area efficient, and suitable for diagnosis toward power supply and signal integrity in analog and digital circuits in mixed-signal SoC integration.     

Teleoperation via computer network

In a teleoperation system, providing force information to a human operator can improve task performance. When a communication block between a master and a slave has a transmission delay, the system is easily destabilized. Anderson and Spong guaranteed passivity in the communication block by using scattering transformation and overcame this instability caused by the time delay. But this method can be applied to the communication block with a constant time delay. In a traditional teleoperation system, its communication block has a constant time delay. But time delay irregularly changes in a computer network because many users share telecommunication lines. This paper shows that the variable time delay destabilizes bilateral master-slave manipulator with scattering transformation and a new compensation method which keeps the time delay constant. This new compensation method has been implemented in a single-axis master-slave manipulator.     

40 Gbit/s packet bit error ratio and loss real-time measurement for ultrahigh-speed packet switched network

A novel packet bit error rate (BER) and loss measurement method and system is proposed. A proposed 40 Gbit/s packet BER and loss measurement system is expressed in detail. A 40 Gbit/s BER and loss measurement with various conditions is demonstrated experimentally. In real time, only the payload part of a packet and burst stream with fluctuated guard time is evaluated. The BER and packet loss of a randomly received packet sequence due to routing and buffering can be also evaluated by the measurement system. A 10 Gbit/s packet BER and loss measurement with optical label switching, buffering, and preamble-free optical packet 3R are demonstrated experimentally.     

Nanoimprinting using release-agent-coated resins

A fluorinated self-assembled monolayer (F-SAM) is mainly used as the antisticking layer. To prevent the F-SAM coated on the nanoimprint lithography (NIL) mold from deteriorating, we propose a new form of nanoimprinting using a release-agent-coated resin. The results from measuring the surface free energy and observations by scanning probe microscopy (SPM) confirmed that the surface free energy, frictional force, and adhesion force of the release-agent spray-coated polymethylmethacrylate (PMMA) were lower than those of PMMA. To prove the release-agent spray-coated PMMA had a releasing effect, we tried to undertake thermal nanoimprinting on it using a mold without F-SAM. The pattern was clearly imprinted on the resin without any signs of adhesion.     

Phase and magnetic properties of iron oxide clusters in 20CaO·20SiO2·7Fe2O3·6FeO glasses

The annealing of 20CaO·20SiO₂·7Fe₂O₃·6FeO glasses at 973K in vacuo produced clusters of iron oxide, the shape of which was nearly spherical and the diameter distributed in the narrow range 25–115Å. The phase of clusters was identified to be Fe³⁺(Fe³⁺ _{poststagger|1.30}Fe²⁺ _{poststagger|0.55}V_0.15)·O₄ in the inverse spinel structure based upon the Mössbauer spectra and x-ray diffraction profiles. The clusters exhibited superparamagnetism and their effective anisotropy energy constant was inversely proportional to the cluster diameter. The magnetization of the glasses measured by a vibrating sample magnetometer was 7.2 × 10^-6 Wbmkg^-1 at 10 kOe at room temperature and smaller than the value calculated assuming that the whole clusters have superparamagnetism. These results suggest the pinning of spins near the cluster surface.     

Bias point thermal shift growth in Z-cut LiNbO/sub 3/ Modulators

Growth of a bias point thermal shift induced by dc bias in z-cut LiNbO/sub 3/ optical intensity modulators is quantitatively discussed from the standpoint of its impact on field service. During 20 years of device operation under a worst-case dc bias condition, the thermal shift slope grows almost symmetrically with respect to a bias polarity. An initial small thermal shift of around /spl plusmn/7 mV//spl deg/C (3/spl sigma/ distribution bounds) increases continuously over time with biased operation at 55/spl deg/C and approaches /spl plusmn/70 mV//spl deg/C after 20 years. This increased temperature sensitivity would generate approximately a 2-V bias point shift toward the bias rail when modulator is exposed to temperature variation from 55/spl deg/C to 25/spl deg/C.     

Transport-Coefficient Dependence of Current-Induced Cooling Effect in a Two-Dimensional Electron Gas

The dependence of the current-induced cooling effect on the electron mobility??? _e is explored for a two-dimensional electron gas (2DEG) subjected to a perpendicular magnetic field. We calculate the distributions of the electrochemical potentials and the temperatures under a magnetic field, fully taking account of thermoelectric and thermomagnetic phenomena. Whereas the electrochemical potential and the electric current remain qualitatively unchanged, the temperature distribution exhibits drastic mobility dependence. The lower-mobility system has cold and hot areas at opposite corners, which results from the heat current brought about by the Ettingshausen effect in the vicinity of the adiabatic boundaries. The cooling effect is intensified by an increase in??? _e. Intriguingly, the cold and hot areas change places with each other as the mobility??? _e is further increased. This is because the heating current on the adiabatic edges due to the Righi?CLeduc effect exceeds that due to the Ettingshausen effect in the opposite direction.