Rate of emulsion polymerization of styrene

In emulsion polymerization, the Smith and Ewart theory gives about two or three times the number of polymer particles obtained by experiment. In this paper, a reaction model is proposed which, from the standpoint of reactor design, can give an adequate explanation of the whole course of an emulsion polymerization of monomer highly insoluble in water. Among other things, the generating process of polymer particles is examined in detail. It is demonstrated experimentally that a new parameter proposed here, which represents the degree of difficulty of monomer initiation in micelles, is indispensable in explaining that process. Also confirmed is that monomer initiation takes place more easily in polymer particles than in micelles. According to the new model, the progress of polymerization, i.e., monomer conversion, the number of the polymer particles, and properties of polymer thus produced can be estimated with satisfactory accuracy. Furthermore, approximate equations are derived for easier estimation.     

Changes in flagellar bending during the course of hyperactivation in hamster spermatozoa

The motility pattern of mammalian spermatozoa changes during migration in the female genital tract and during incubation in vitro. This change in motility is termed hyperactivation. Hyperactivated spermatozoa swim vigorously in 'whiplash', 'figure-8' or 'small circle' trajectories. In this study, a quantitative analysis was carried out of the changes in the motility pattern of hamster spermatozoa during incubation to investigate the mechanism regulating hyperactivation. In the culture system used in this study, hyperactivation occurred 4 h after incubation. Several parameters in the analysis of sperm movement pattern were examined. Curvilinear velocity, average path velocity and straightness abruptly increased between 2 and 4 h. However, linearity, amplitude of lateral head displacement, beat cross frequency and average wavelength gradually changed with time. In the analysis of flagellar bending, the bend angles were measured after dividing images of the flagellum into short lengths. Flagellar bending changed in different manners in each region during incubation. The asymmetry in the direction of the curve of the head gradually increased with time in the first half of the flagellum. The flexibility, which was determined using the amplitude of bending and the rate of change in bend angles, abruptly decreased between 10 min and 1 h, and then increased between 2 and 4 h in the first half of flagellum. These results indicate that complex physiological changes occur before hyperactivation.     

Delivery of medical multimedia contents through the TCP/IP network using RealSystem

We developed a low cost, user-friendly multimedia delivery system, to provide medical lectures saved as multimedia contents to persons engaged in medicine. This system was created using the RealSystem package with the TCP/IP network. Users can review lectures and medical meeting presentations with video and audio through the Internet, whenever convenient. Each medical source of video and slide has been clearly displayed on a screen. Members of medical associations or medical students can easily review the most interesting parts of these files. This system is being used efficiently in distance learning and aids the diffusion of the latest information and technology to busy physicians and medical students.     

Simultaneous determination of five penicillins in muscle,liver and kidney from slaughtered animals using liquid chromatography coupled with electrospray ionization tandem mass spectrometry

A simple and rapid method for the simultaneous determination of five penicillins (ampicillin, penicillin G, penicillin V, oxacillin and cloxacillin) in muscle, liver and kidney tissues using high-performance liquid chromatography-electrospray tandem mass spectrometry (LC-ESI-MS/MS) was developed. Mass spectral acquisition was done in the negative ion mode by applying selected reaction monitoring (SRM). The five penicillins were extracted with water, and the extracted solution was cleaned up on a C18 cartridge. Phenethicillin was added as an internal standard, and the extract was diluted with water for injection into the LC-ESI-MS/MS. The recoveries of the five penicillins were in the range of 77.3-99.8% from muscle, liver and kidney fortified at 10-250 ng/g. The detection limits for ampicillin were 6 ng/g in muscle and kidney and 15 ng/g in liver. For penicillin G and penicillin V, the detection limits were 2 ng/g in muscle and kidney and 5 ng/g in liver. For oxacillin and cloxacillin, the detection limits were 4 ng/g in muscle and kidney and 10 ng/g in liver. Twenty-three muscle, fourteen liver and twenty-two kidney samples from the markets were analyzed by this method. No penicillins were detected in any sample.     

Sonochemical degradation of chlorinated hydrocarbons using a batch and continuous flow system

The sonochemical degradation of chlorinated hydrocarbons such as 1,1,1-trichloroethane, trichloroethylene and tetrachloroethylene in aqueous solution was carried out in the batch and continuous flow systems at an ultrasonic frequency of 100kHz under an air atmosphere. In the batch experiment, the rate of degradation follows the order 1,1,1-trichloroethane>tetrachloroethylene>trichloroethylene, and the chlorinated hydrocarbon were readily degraded by ultrasonic irradiation. The experiments in the continuous flow system were performed in the range of volumetric flow rate from 7 to 30 x 10(-3)lmin(-1). The conversion of the chlorinated hydrocarbons at a steady-state of reactor depended on the volumetric flow rate. The yield of Cl(-) (as a measurement of mineralization of chlorinated hydrocarbons) was 70-90% of the chlorine atoms in the parent chlorinated hydrocarbon molecules. From the viewpoint of the scale-up process, the sonochemical degradation of trichloroethylene was simulated in a three stage reactor, and the conversion (>99%) in a third stage reactor was showed the good results that can be satisfied a desired water quality standard.     

Temperature Dependence of the Velocity of Sound in Liquid Metals of Group XIV

The temperature dependences of the velocity of sound in liquid Pb, Sn, Ge, and Si have been measured by means of the pulse transmission technique over temperature ranges of 610–1078 K, 608–1463 K, 1215–1443 K, and 1723–1888 K, respectively. In both liquid Pb and Sn, the velocities of sound decrease linearly with increasing temperature, which is the same temperature dependence as shown in many other liquid metals. On the other hand, the velocities of sound in liquid Ge and Si exhibit anomalous temperature dependences. In Ge, the velocity of sound has a distinct maximum around 1280 K and decreases linearly at higher temperatures. In Si, the velocity of sound increases monotonically with increasing temperature in the temperature range investigated. It is considered that these results predict that the coordination numbers of liquid Ge and Si increase with increasing temperature.     

Piezoelectric properties in (K0.5Bi0.5)TiO3-(Na0.5Bi0.5)TiO3-BaTiO3 lead-free ceramics.

Lead-free piezoelectric ceramics with compositions around the morphotropic phase boundary (MPB) x(Na0.5Bi0.5)TiO3-y(K0.5Bi0.5)TiO3-zBaTiO3 [x + y + z = 1; y:z = 2:1] were synthesized using conventional, solid-state processing. Dielectric maximum temperatures of 280 degrees C and 262 degrees C were found for tetragonal 0.79(Na0.5Bi0.5)TiO3-0.14(K0.5Bi0.5)TiO3-0.07BaTiO3 (BNBK79) and MPB composition 0.88(Na0.5Bi0.5)TiO3-0.08(K0.5Bi0.5)TiO3-0.04BaTiO3 (BNBK88), with depolarization temperatures of 224 degrees C and 162 degrees C, respectively. Piezoelectric coefficients d33 were found to be 135 pC/N and 170 pC/N for BNBK79 and BNBK88, and the piezoelectric d31 was determined to be -37 pC/N and -51 pC/N, demonstrating strong anisotropy. Coercive field values were found to be 37 kV/cm and 29 kV/cm for BNBK79 and BNBK88, respectively. The remanent polarization of BNBK88 (approximately 40 microC/cm2) was larger than that of BNBK79 (approximately 29 microC/cm2). The piezoelectric, electromechanical, and high-field strain behaviors also were studied as a function of temperature and discussed.     

The effects of a convex rear-view mirror on ocular accommodative responses

Convex mirrors are universally used as rear-view mirrors in automobiles. However, the ocular accommodative responses during the use of these mirrors have not yet been examined. This study investigated the effects of a convex mirror on the ocular accommodative systems. Seven young adults with normal visual functions were ordered to binocularly watch an object in a convex or plane mirror. The accommodative responses were measured with an infrared optometer. The average of the accommodation of all subjects while viewing the object in the convex mirror were significantly nearer than in the plane mirror, although all subjects perceived the position of the object in the convex mirror as being farther away. Moreover, the fluctuations of accommodation were significantly larger for the convex mirror. The convex mirror caused the 'false recognition of distance', which induced the large accommodative fluctuations and blurred vision. Manufactures should consider the ocular accommodative responses as a new indicator for increasing automotive safety.     

Characteristics of porous polymer composite columns prepared by radiation cast-polymerization

Porous polymer composite columns having porous structure were prepared by radiation cast-polymerization of hydrophilic monomers at low temperature and their characteristics were studied. The porosity of the polymer increased with decreasing monomer concentration. The elution time of water in the polymer column increased with increasing monomer concentration and with decreasing irradiation temperature. The elution time was dependent on the degree of hydration of the polymer. The polymer with a degree of hydration of 0.2 to 0.4 gave the minimum elution time. The elution time decreased with the addition of porous inorganic substances.     

A feasible core design of lead bismuth eutectic cooled CANDLE fast reactor

Among the innovative reactor concepts, CANDLE has several advantages over conventional reactor designs. However, when CANDLE is extended to long life, the clad integrity at high neutron fluence, the build-up of fission product gases, and the pressure drop for long cores pose technological challenges which have to be overcome. In this paper, we propose practically viable design procedures, such as recladding the entire fuel pins and replacement of different amounts of fuel at different radial positions, to ensure clad integrity and flat power distribution, respectively. We demonstrate the efficacy of such design procedures by calculations that are performed on a LBE CANDLE reactor. Our calculations show that for a reactor operation period of 3700 days the various reactor parameters are within the limits proposed by Japan Atomic Energy Agency (JAEA).