Synthesis and characterization of copolythiophene

Copolythiophenes (Co‐PTs), poly(3‐hexylthiophene‐co‐3‐thiophene carboxylic acid) (P3HT‐TCa), poly(3‐hexyloxylthiophene‐co‐3‐thiophene carboxylic acid) (P3HOT‐TCa), and poly(3‐phenylthiophene‐co‐3‐thiophene carboxylic acid) (P3PhT‐TCa), were synthesized by chemical oxidized polymerization to investigate the effect of copolymerization on the properties of polythiophenes (PTs). Gel permeation chromatography showed that the molecular weight (MW) of Co‐PT was lower than that of homopolythiophene. Fourier transform infrared (FTIR) spectra indicated that the copolymerization was successful between the monomers. The λ_max of Co‐PTs gave a “blue shift” in ultraviolet‐visible (UV‐VIS) spectra. Photoluminescence (PL) spectra showed that the PL intensity of Co‐PT became weaker than that of homopolythiophene and the disappearance of PL had been observed in P3HOT‐TCa. The thermal stability of Co‐PT was influenced by the carboxyl for its low decomposition temperature. Furthermore, the copolymerization between multi‐wall carbon nanotube containing thiophene ring (MWNT‐Th) and 3‐hexyloxylthiphene could also take place successfully. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Experimental investigation of adhesive meltblown web production using accessory air

Using a low‐melting‐point polymer, copolyamide, as raw material, adhesive meltblown webs were formed on the ordinary melt‐blowing line by using the accessory air and the accessory air chamber. The webs thus produced exhibit narrower fiber diameter distribution and a more uniform pore structure. At the same time, four main melt‐blowing parameters, the primary air pressure, the accessory air pressure, the melt throughput rate, and the die‐to‐collector distance, are discussed in terms of their influence on geometric mean diameter of fibers and fiber diameter distribution. POLYM. ENG. SCI., 46:1–7, 2006. © 2005 Society of Plastics Engineers     

论蒙古族传统马具设计的系统性

文章以作者亲身参与的编著项目及田野考察为契机,将蒙古族传统马具设计作为研究对象,以蒙古族传统马具设计的系统性为论点,探讨其系统构成、单元功能及三个子系统的分工与关联。     

Decentralized weighted control for a class of large‐scale systems with multi‐modes

In this paper, the control synthesis problem for a class of large‐scale systems with multi‐modes that are called large‐scale switched systems is addressed. By introducing the concept of decentralized switching signal and the relevant decentralized average dwell time, the asymptotic stability and weighted ?₂ gain performance are investigated. It should be noted that the decentralized switching covers general switching cases for large‐scale switched systems, namely, it admits both time‐dependent switching signal and arbitrary switching signal blended in the decentralized switching. Then, on the basis of the analysis results, the decentralized weighted control scheme including state feedback controller gains and switching signals is studied. Several design algorithms are proposed to meet different controller design problems. Finally, numerical examples are provided to illustrate theoretical findings within this paper. Copyright © 2013 John Wiley & Sons, Ltd.     

制造任务分解与制造单元级资源配置协同优化

针对网络化制造环境下制造任务分解与资源配置脱节的问题,提出了制造任务逐层分解与制造单元级资源配置协同优化的方法,建立了协同优化流程.在对制造任务特点进行分析的基础上,建立了制造任务模型和制造单元资源模型,建立了多目标优化模型和目标的综合评价体系,利用在遗传算法求解搜索过程中所获得的动态信息进行综合评价,并随着求解搜索过程的深入对变异幅度进行调整,以达到全局优化和加快收敛速度的目的.最后以实例验证了该方法的可行性与有效性.     

火电厂预应力框架拟静力试验与推覆分析

火电厂作为重点抗震设防建筑,理应具有较强的抗震性能,而现行＂两阶段＂结构设计方法无法提供结构在地震作用下的整体反应。本文采用静力弹塑性分析方法,利用SAP软件,结合我国现行抗震设计规范,分析了火电厂预应力框架在地震作用下的结构反映特性,并通过与拟静力试验结果的对比,提出设计建议。分析表明该结构具有明显的薄弱环节,在设计中应予以重视。     

论我国刑事和解制度的构建

刑事和解是我国刑事政策的重要改革措施,其理论基础有,无讼与和合文化、刑事司法哲学的转向、宽严相济刑事政策.但是,司法实践中的刑事和解存在功能性缺陷和相关法律制度缺位的困境.因此,有必要从存在的困境出发,具体在立法选择和程序设计上探讨刑事和解制度在我国如何合理构建.     

高抗冲聚苯乙烯的阻燃研究

利用锥形量热仪(CONE)研究了阻燃高抗冲聚苯乙烯(HIPS)的燃烧性能,同时也采用垂直燃烧、氧指数等方法进行了对比测试。含十溴二苯乙烷的试样不仅保持了原有的物理机械性能,而且阻燃效果明显。相对于使用十溴二苯醚阻燃的HIPS,十溴二苯乙烷的使用不会产生多溴代二问题,产品符合一定的环保要求。     

Fast‐moving coin recognition using deep learning

Multimedia Tools and Applications - Deep learning has made essential contributions to the development of visual object detection and recognition. Identifying fast-moving objects from the viewpoint...