Design of plant safety model in plant enterprise engineering environment

Plant enterprise engineering environment (PEEE) is an approach aiming to manage the plant through its lifecycle. In such environment, safety is considered as the common objective for all activities throughout the plant lifecycle. One approach to achieve plant safety is to embed safety aspects within each function and activity within such environment. One ideal way to enable safety aspects within each automated function is through modeling. This paper proposes a theoretical approach to design plant safety model as integrated with the plant lifecycle model within such environment. Object-oriented modeling approach is used to construct the plant safety model using OO CASE tool on the basis of unified modeling language (UML). Multiple views are defined for plant objects to express static, dynamic, and functional semantics of these objects. Process safety aspects are mapped to each model element and inherited from design to operation stage, as it is naturally embedded within plant's objects. By developing and realizing the plant safety model, safer plant operation can be achieved and plant safety can be assured.     

Radiation-induced polymerization of ethylene in pilot plant. III. Heavy-phase recycling process

Radiation-induced polymerization of ethylene using aqueous tert-butyl alcohol as medium was carried out in a large-scale pilot plant with a 50-liter central source-type reactor at a pressure of 105 to 395 kg/cm², temperature of 30° to 80°C, mean dose rate of 4.5 × 10⁴ to 1.9 × 10⁵ rads/hr, ethylene feed rate of 5.5 to 23.5 kg/hr, and medium feed rate of 21 to 102 l./hr. The space–time yield and molecular weight of the polymer were in the range of 4.7 to 16.8 g/l.-hr and 1.3 × 10⁴ to 8.9 × 10⁴, respectively. The space–time yield and molecular weight increased with mean residence time at 30°C, whereas at 80°C they became almost independent of the time. The space–time yield increased with pressure and dose rate, slightly decreased with temperature, and was maximum at ethylene molar fraction of 0.5. The polymer molecular weight increased with pressure and ethylene molar fraction, and decreased with dose rate and temperature. The total amount of deposited polymer on the reactor wall, source case wall, and scraping blades was usually less than 1 kg, which was negligibly small for the analysis of polymerization. Continuous discharge of the polymer slurry and production of fine-powder polyethylene were successfully carried out. In the central source-type reactor, a dose rate of 1.9 × 10⁵ rads/hr was obtained with a ⁶⁰Co source of ca. 12 kCi.     

A 2.5-GFLOPS, 6.5 million polygons per second, four-way VLIWgeometry processor with SIMD instructions and a software bypassmechanism

A four-way very long instruction word (VLIW), 312-MHz geometry processor with peripheral component interconnect/accelerated graphic port bus bridge was implemented in a 0.21-μm, 2.5-V, three-layer-metal CMOS process. We adopted (1) a software bypass mechanism, (2) single-instruction multiple-data stream instructions, (3) four sets of floating-point multiply add and accumulate execution units, (4) special condition code registers and a branch condition generator for a clipping operation, and (5) automatic clock delay tuning methodology. As a result of these features, we achieved a performance of 2.5 GFLOPS and 6.5 million polygons per second for a three-dimensional geometry processor, which is the highest published performance as a single geometry processor. The processor is applicable to computer-aided-design systems that require very high graphics performance     

Prediction of Aeroelastic Vibration of Rectangular Cylinders by k-ε Model

The applicability of the k-ε model in the prediction of aerodynamic force and instability is investigated herein. To show that two-dimensional analysis by the k-ε model is different from ordinary two-dimensional analyses that simply neglect the spanwise velocity, an analysis of the aeroelastic vibration of a cross section with B∕D = 2.0 is performed first using the latter method. In this case, motion-induced vortex oscillation was successfully simulated; however, galloping, in which the flapping motion of the separated shear layer plays an important role, could not be simulated. The result shows that physically reasonable flows can not be obtained by ordinary two-dimensional analyses, unless the spanwise momentum diffusion is incorporated correctly. On the other hand, the k-ε model, which incorporates this diffusion process by an eddy viscosity, enables two-dimensional analyses even in the high Reynolds number region. In this paper, applicability of the model is examined for rectangular cross sections with a wide range of B∕D ratio, i.e., 0.6 ≤ B∕D ≤ 8.0. Various typical aerodynamic features calculated using this model were found to be in good agreement with those obtained experimentally, particularly including discontinuities in Strouhal number at the critical cross sections of B∕D = 2.8 and 6.0. Based on this result, an elastically supported B∕D = 2.0 cylinder was analyzed. The motion-induced vortex oscillation and a coupling of the vortex-induced oscillation and galloping were successfully simulated, and their values were in good agreement with those measured in experiments conducted earlier.     

Augmented proliferation of human alveolar macrophages after allogeneic bone marrow transplantation

After allogeneic bone marrow transplantation (allo-BMT), recipient alveolar macrophages (AM) are gradually replaced by AM of the donor origin. An influx of mononuclear phagocytes of donor origin to the lung is responsible for the repopulation, but the detailed kinetics remain unclear. We therefore studied 24 BMT recipients who underwent bronchoalveolar lavage (BAL) from 24 to 83 days after BMT. AM cell number, size, morphology, proliferating ability, and genotype of AM were measured. Before day 50, the number and size of AM in BAL fluid were similar to those of normal nonsmokers. However, after day 50, the mean number of AM increased threefold and the mean cell size decreased due to the increase of small AM. These small cells are presumably of donor origin based on DNA fingerprinting analysis and based on fluorescence in situ hybridization for the Y chromosome in a sex-mismatched case. Immunohistochemistry and cell cycle analysis demonstrated that the increase in AM number coincided with a remarkable increase of AM expressing proliferating cell nuclear antigen, suggesting that small AM are proliferating. This is the first report representing that augmented proliferation of donor AM in situ may contribute to the reconstitution of AM population after BMT.     

Cytochemical energy-filtering transmission electron microscopy of mitochondrial free radical formation in paraquat cytotoxicity.

The generation of oxygen free radicals was investigated using cytochemistry and its energy-filtering transmission electron microscopy in reference to the toxic mediator for the herbicide paraquat. When isolated intact mitochondria from rat livers were incubated in a medium containing paraquat and NADH, a mitochondrial NADH-quinone oxidoreductase activity generated superoxide anions to cause the destruction of mitochondria which resulted in cell death. The superoxide anions were immediately converted into hydrogen peroxide, which then formed cerium perhydroxide deposits in the presence of cerium ions and precipitated on the outer surface of the mitochondrial outer membrane. This localization was also specifically identified by energy spectral imaging and image-electron energy loss spectral analyses. Precipitation reaction was scavenged by the addition of either cytochrome c or catalase and inhibited by dicoumarol (an inhibitor of NAD(P)H-quinone oxidoreductases). These cytochemical energy-filtering transmission electron microscopic results indicated that paraquat generated free radicals from the outer membrane of mitochondria.     

PCE-based fast path control in multi-domain photonic networks

We discuss issues for controlling an optical path in large-scale photonic networks, and introduce an inter-domain path control system based on Path Computation Elements (PCEs). In the system, maximum flow information enables the load balancing of traffic, and Path Key scheme preserve the confidentiality of internal topology information among carrier networks. Based on the experimental results, we show the path setup in the introduced system is significantly faster than the manual path setup among domains in current carriers' networks. For the additional reduction of the path setup time, we propose the domain-wise paralleled signaling method. We also show that decreasing the number of nodes per domain makes path setup faster in the introduced system with deployment of the proposed signaling method.     

Study on Drying Organic Sludges by Thermal Jet Dryer—Part 1: Drying Performance of Thermal Jet Dryer

The authors are developing a thermal jet dryer (TJD), with a vertical disc-shaped drying tank, for the purpose of weight and volume reduction of solid wastes with high water content, such as organic sludges. In order to obtain the drying performance of TJD, drying experiments using three kinds of solid wastes were carried out. The following results were obtained: (1) Drying performance depended most on the disintegration characteristics of sample. (2) There was little influence of the samples' properties on the gas–solid multiphase flow in the tank. (3) There was a critical feed rate at which the drying performance changed drastically.