Effect of mebendazole on free amino acid composition of cyst wall and cyst fluid of Echinococcus granulosus harbored in mice

Eighteen and 23 FAA components were detected in the cyst wall and cyst fluid of E granulosus, respectively, by using automatic amino acid analyzer. The concentrations of most of the determined FAA were higher in the cyst fluid than those in the cyst wall, especially the taurine was 5-fold higher. Mebendazole treatment resulted in an increase in the concentration of alanine, valine, lysine, and taurine in both cyst wall and cyst fluid, the most notable being the alanine in the cyst wall. The results are interpreted as a coupling of glycolysis and amino acid metabolism, suggesting an involvement of FAA metabolism in the mechanism of Meb action.     

Electromagnetic Shielding Properties of Woodceramics Made from Wastepaper

Woodceramics are new porous carbon materials, which are made by impregnating woody materials with phenol resin and then thermoformed in a vacuum furnace and these have been shown to have electromagnetic shielding properties. In the recycling of wastepaper, ways of using the wastepaper other than for paper pulp are needed to be developed. In this study, we made Woodceramics from handbill advertisement paper and telephone directory paper, and measured their electromagnetic shielding properties in order to find new uses for wastepaper. The results showed that the Woodceramics made from wastepaper had an electric shielding effectiveness of 30 dB for 100 MHz and 40 to 43 dB for 300 MHz or higher, and had a magnetic shielding effectiveness of 30 dB for 100 MHz and 37 dB for about 400 MHz. An electric equivalent circuit of the pore model in the Woodceramics is introduced. In addition, it is proposed that the excellent electromagnetic shielding effectiveness of the Woodceramics is caused by dielectric loss.     

Microstructure and properties of various fluorine-containing SiAlON ceramics synthesized by HIPing

An attempt was made to prepare various F-doped β-, O-, X-, and -SiAlONs from a mixture of Si₃N₄, SiO₂, Al₂O₃, AlN, or Y₂O₃ using AlF₃ or topaz as the fluorine source by HIPing at 1500–1800°C and 150 MPa. The phases were identified and the z, x, and m/n values determined for β-, O-, and -SiAlONs by X-ray diffraction. When AlF₃ was used, a single phase ceramic (O-SiAlON) was produced from a mixture of -Si₃N₄ and SiO₂ at 1500°C, with a mixture of O- and β-SiAlONs formed at 1700°C. A mixture of -Si₃N₄, AlN, and Y₂O₃ with AlF₃ produced β-/Y--SiAlON ceramics at 1730°C. The use of topaz produced the β-SiAlON ceramic with a trace of mullite from a mixture of -Si₃N₄ and AlN at 1770°C and mixed phase β-/O-SiAlON ceramics from -Si₃N₄ and SiO₂ at 1700°C. Single phase X-SiAlON could not be obtained under the present conditions. The microstructures of the single phase O- and β-SiAlON ceramics and the β-/Y--SiAlON mixture showed the growth of O- and β-SiAlON and Y--SiAlON crystals with hexagonal and/or long rod-like or platy shapes in a matrix of F-containing glassy phase. The compositions of the SiAlON crystals and the glass phase were semi-quantitatively determined by EDX; the total glass phase was estimated by a quantitative Rietveld XRD powder method. The F-doped β-SiAlON ceramics showed better corrosion resistance towards NaCl vapor and lower Vickers hardnesses.     

High-Temperature Oxidation at 1500° and 1600°C of SiC/Graphite Coated with Sol–Gel-Derived HfO2

Oxidation of SiC compositionally graded (SCGed) graphite coated with HfO₂ derived from HfCl₄ by a sol–gel process was performed at 1500° and 1600°C in a flowing gas mixture of Ar and O₂ (80/20 kPa). SCGed graphite was produced by reaction of graphite with either molten Si or SiO gas at 1450°C. The sol–gel-derived HfO₂ precursor was deposited on SCGed graphite by a dip-coating method. Isothermal and cyclic oxidation of uncoated- and HfO₂-coated SCGed graphite was studied by monitoring overall weight change using an electro-microbalance. Scanning electron microscopy with energy-dispersive X-ray analysis was used to observe the surfaces and cross-sections of the oxidized HfO₂-coated SCGed graphite. The formation of HfSiO₄ was confirmed on the outer layer of the oxidized sample, beneath which a thin silica layer was formed. The improved oxidation resistance of SCGed graphite by coating with HfO₂ is discussed on the basis of the formation of these two layers.     

Facile purification of tocopherols from soybean oil deodorizer distillate in high yield using lipase

Tocopherols have been purified from deodorizer distillate produced in the final deodorization step of vegetable oil refining by a process including molecular distillation. Deodorizer distillate contains mainly tocopherols, sterols, and free fatty acids (FFA); the presence of sterols hinders tocopherol purification in good yield. We found that Candida rugosa lipase recognized sterols as substrates but not tocopherols, and that esterification of sterols with FFA could be effected with negligible influence of water content. Enzymatic esterification of sterols with FFA was thus used as a step in tocopherol purification. High boiling point substances including steryl esters were removed from soybean oil deodorizer distillate by distillation, and the resulting distillate (soybean oil deodorizer distillate tocopherol concentrate; SODDTC) was used as a starting material for tocopherol purification. Several factors affecting esterification of sterols were investigated, and the reaction conditions were determined as follows: A mixture of SODDTC and water (4∶1, w/w) was stirred at 35°C for 24 h with 200 U of Candida lipase per 1 g of the reaction mixture. Under these conditions, approximately 80% of sterols was esterified, but tocopherols were not esterified. After the reaction, tocopherols and FFA were recovered as a distillate by molecular distillation of the oil layer. To enhance further removal of the remaining sterols, the lipase-catalyzed reaction was repeated on the distillate under the same reaction conditions. As a result, more than 95% of the sterols was esterified in total. The resulting reaction mixture was fractionated to four distillates and one residue. The main distillate fraction contained 65 wt% tocopherols with low contents of FFA and sterols. In addition, the residue fraction contained high-purity steryl esters. Because the process presented in this study includes only organic solvent-free enzymatic reaction and molecular distillation, it is feasible as a new industrial purification method of tocopherols. This work was presented at the Biocatalysis symposium in April 2000, held at the 91st Annual Meeting and Expo of the American Oil Chemists Society, San Diego, CA.     

System analysis for effective use of palm oil waste as energy resources

Biomass refers to renewable energy sources and comes from biological materials such as trees, plants, manure as well as municipal solid wastes. Effective utilization of biomass as an energy resource requires the use of an optimization model to take into account biomass availability, transportation distances, and the scales and locations of power facilities within a region. In this study, we develop a new analytical tool that integrates cost, energy savings, greenhouse gas considerations, scenario analysis, and a Geographic Information System (GIS) to provide a comprehensive analysis of alternative systems for optimizing biomass energy production. The goal is to find a system that optimizes the use of biomass waste by analyzing the cost, net avoided CO₂ emission, and net energy savings with the objective of profit maximization. In this paper, we describe an application of the modeling tool described above to one of the fastest growing agriculture industries in Asia, the palm oil industry, for the case of Malaysia. Five scenarios utilizing palm oil waste as energy resources are discussed. The scenario of installing of new Combined Heat and Power (CHP) plants in the region yielded a number of benefits in terms of net energy savings, net avoided CO₂ emission, and profits. The results also demonstrate the benefits of utilizing excess heat for biomass pre-treatment. The choice of a suitable CHP plant scale, management strategies for biomass seasonal availability, and market price of biomass are also important factors for effective use of the biomass in a region.