Learning and retention of associations between auditory icons and denotative referents: implications for the design of auditory warnings

OBJECTIVE: This study examined the way in which the type and preexisting strength of association between an auditory icon and a warning event affects the ease with which the icon/event pairing can be learned and retained. BACKGROUND: To be effective, an auditory warning must be audible, identifiable, interpretable, and heeded. Warnings consisting of familiar environmental sounds, or auditory icons, have potential to facilitate identification and interpretation. The ease with which pairings between auditory icons and warning events can be learned and retained is likely to depend on the type and strength of the preexisting icon/event association. METHOD: Sixty-three participants each learned eight auditory-icon/denotative-referent pairings and attempted to recall them 4 weeks later. Three icon/denotative-referent association types (direct, related, and unrelated) were employed. Participants rated the strength of the association for each pairing on a 7-point scale. RESULTS: The number of errors made while learning pairings was greater for unrelated than for either related or direct associations, whereas the number of errors made while attempting to recall pairings 4 weeks later was greater for unrelated than for related associations and for related than for direct associations. Irrespective of association type, both learning and retention performance remained at very high levels, provided the strength of the association was rated greater than 5. CONCLUSION: This suggests that strong preexisting associations are used to facilitate learning and retention of icon/denotative-referent pairings. APPLICATION: The practical implication of this study is that auditory icons having either direct or strong, indirect associations with warning events should be preferred.     

Topological design considering flexibility under periodic loads

Topology optimization has been extensively considered to design the structural configuration for the stiffness maximization and the eigenfrequency maximization. In this paper, we construct a topology optimization method implementing flexibility with the time-periodic loading condition. First, the flexibility in the dynamic periodic loading is formulated using the mutual energy concept. Second, the multi-optimization problem is formulated using a new multi-objective function in order to obtain an optimal solution incorporating both flexibility and stiffness. Next, the topology optimization procedure is developed using the homogenization design method. Finally, some examples are provided to confirm the optimal design method presented here. Received January 18, 1999     

基于平面模板的机器人TCF标定

针对末端夹持激光位移传感器的机器人TCF(tool/terminal control frame)标定,提出一种基于平面模板的标定方法,机器人操作末端执行器使激光位移传感器在不同位形下对平面模板进行测量,再通过非线性最小二乘拟合求解标定参数.为了减小问题的奇异性,对标定时应该采取的参数控制策略进行了定性分析.该标定方法只需要一块表面精度较高的平面模板,而无需其它测量仪器,标定过程简单、易操作,且易于实现自动化.仿真和实验结果表明本文提出的标定方法具有较高的精度.     

Zr-Hf interdiffusion in polycrystalline Y2O3-(Zr+Hf)O2

Lattice and grain-boundary interdiffusion coefficients were calculated from the concentration distributions determined for Zr-Hf interdiffusion in polycrystalline 16Y₂O₃·84(Zr_1–x Hf _x )O₂ withx=0.020 and 0.100. The lattice interdiffusion coefficients were described byD=0.031 exp [–391 (kJ mol^–1)/RT] cm² sec^–1 and the grain-boundary diffusion parameters byD=1.5×10^–6exp [–309(kJ mol^–1)/RT] cm³ sec^–1 in the temperature range 1584–2116° C. Comparison of the results with those for the systems CaO-(Zr+Hf)O₂ and MgO-(Zr+Hf)O₂ indicated that the Zr self-diffusion coefficient was insensitive to the dopants in the fluorite-cubic ZrO₂ solid solutions.     

Grigorii Valentinovich Samsonov

Obituaries

Grigorii Valentinovich Samsonov     

A study of hypervelocity impact on cryogenic materials

This paper reports a result of hypervelocity impact experiments on cryogenically cooled aluminum alloys and a composite material. Experiments are carried out on a target palate at 122 K. Aluminum spheres at 1.95 km/s in 50 kPa air were impinged against the target plate at cryogenic temperature and the result was compared with room temperature target plates. Hypervelocity impact (HVI) processes were visualized with shadowgraph arrangement and recorded with high-speed video camera and to ensure the temperature dependence we compared HVI tests with metal target plates with AUTODYN 2D and SPH numerical simulations. We found that cryogenic impacts created slight differences of impact damage from room temperature ones, i.e., the shape and averaged diameters of HVI crater holes were less at cryogenic impacts.     

Study on high performance ice slurry formed by cooling emulsion in ice storage (discussion on adaptability of emulsion to thermal storage material)

This study focuses on an emulsion as a new thermal storage material for ice storage. Two types of emulsions were formed using an oil–water mixture with a small amount of additive. A silicone, light and lump oils were used. The water contents of the emulsions were 70, 80 and 90%. The additive was an amino group modified silicone oil. No depression of freezing point was observed for the emulsions because of their hydrophobic properties. In order to determine the structure of the emulsions, their electrical resistances were measured. Moreover, components of the liquids separating from the emulsions were analyzed. The results indicated that one emulsion was a W/O type emulsion, while the other was an O/W type. Finally, adaptability of the two emulsions to ice storage was discussed, it was concluded that a high performance ice slurry could be formed by the W/O type emulsion.