Change of characteristics of desulfurization and denitrification by combustion flue gas composition and electrode configuration under pulsed corona discharge

Laboratory-scale and parametric experiments of SO₂ and NO_x removal from the simulated combustion gas by pulsed corona discharge have been performed by changing the combustion gas composition and temperature, the electrode configuration of plasma reactor, and the polarity of high-voltage electrode. The following results are obtained: 1) the higher the concentration of H₂O and O₂, the higher the efficiency of desulfurization and denitrification at the same specific input; 2) the pulsed corona discharge with a voltage pulsewidth as short as 200 ns of negative polarity shows the possibility to attain almost 90 percent deSO_x and deNO_x efficiency at the specific discharge input of 20 J/g, which is almost the same as the specific input in the electron-beam process; 3) the deNO_x characteristics show a little temperature dependence in the range of 70 to 130°C, but the deSO_x efficiency increases rapidly in the temperature region below 100°C suggesting the thermochemical dependence of deSO_x reaction; 4) when desulfurization and denitrification proceed, the white dendritic powder deposits on the plasma reactor whose composition is identified to be 49 mol% (NH₄)₂SO₄ and 47 mol% of 2NH₄NO₃ · (NH₄)₂SO₄, and the ratio of SO₂, NO and NH₃ of the deposit is almost equal to that of supplied gas.     

Development of cable fault location method using fiber optic distributed temperature sensor

When ground-fault problems occur on a cable line, immediate fault location and restoration are required. Therefore, various new methods to locate the fault point instantaneously have been investigated to replace such conventional methods as the Murray loop method and the pulse radar method [1]. These methods require a long time to locate the fault point. One possible fault location method is to sense the temperature rise following a ground fault using a fiber optic distributed temperature sensor. Application of this method was found feasible through sensing the temperature rise at a ground-fault test using a thermocouple as a temperature sensor with test cables [4]. A power/optical composite cable was prepared experimentally and after verifying its thermal mechanical performance, the temperature rise at an incidence of a fault was determined and the anticipated performance was demonstrated in a ground-fault test. This article describes the outline of the test.     

Effective sludge solubilization treatment by simultaneous use of ultrasonic and electrochemical processes.

Sludge disintegration treatment by using simultaneously ultrasonic irradiation and electrolysis was investigated experimentally. A lab-scale diaphragm cell irradiated with ultrasound at a constant oscillating frequency of 20 kHz was used as a reactor. The batch experiments were carried out under different conditions of electric outputs of the ultrasonic generator, electric current for the electrolysis and different initial SS concentrations. A simultaneous treatment in the cathodic compartment without any chemical doses considerably facilitated the sludge solubilization, compared to the sonication alone. An increase in the electric current up to 400 mA under a constant ultrasonic density decreased the specific energy by 55% within the experimental range. The specific energy consumption was also reduced when the initial SS concentration increased. In addition, before carrying out the simultaneous treatment, a brief electrolysis was effective for further reduction of the specific energy and the acceleration of soluble COD generation.     

Use of LINbO3 for Design of Device-type Catalysts with Activity Controllable Functions

A poled ferroelectric LiNbO₃ single crystal with high spontaneous polarization was employed as a catalyst support, and the static and dynamic effects of the polar substrate surfaces on the adsorptive and catalytic properties of thin film catalysts deposited were shown. For the static effect, it was demonstrated that the surface conductivity of copper and metal-free phthalocyanine films increased by the adsorption of NO gas, to a larger extent, when the substrate was the negative polar surface, compared to the positive one. The role of the polar substrates is explained In terms of a band bending model. For the dynamic effect, the Rayleigh surface acoustic wave generated on the LiNbO₃ substrate was shown to enhance the catalytic activity for ethanol oxidation on Cu and Ag thin film catalysts deposited on the propagation path. It is proposed that the catalyst activation is mainly due to an electric Held produced. The use of poled LiNbO₃ is suggested to be effective for the development of a device-type catalyst with activity controllable functions.     

Effect of Ratio of Surface Area to Volume on Oxygen Self-Diffusion Coefficients Determined for Crushed MgO-Al2O3 Spinels

Oxygen self-diffusion coefficients for single-crystal MgO-Al₂O₃ spinels previously determined for crushed particles were recalculated using the microscopic suface area of the sample, as was done for alumina. The corrected results agree well with those of Reddy and Cooper .     

Composition of mixed octadecadienoates via ozonolysis,chromatography and computer solution of linear equations

An approach to the analysis of 55 possible nonconjugated positional isomers of octadecadienoic acid is described and tested with mixtures of individual synthetic methyl esters. In the first example, by ozonolysis a sevencomponent mixture consisting ofcis,cis 5,12-, 6,10-, 6,11-, 6,12-, 7,12-, 8,12-, and 9,12-octadecadienoates was converted to aldehydes, aldehyde-esters and dialdehydes. These fragments were separated on a 50 m×0.2 mm free fatty acid phase (FFAP) vitreous silica capillary column. Equations for an arbitrarily restricted 12×15 matrix of linear simultaneous equations and a computer solution of the matrix provided the composition of the initial methyl octadecadienoate mixture. The power and significance of this method became apparent with the observation that only two of the seven isomers in the known mixture were resolved as single peaks by state-of-the-art capillary gas chromatography, but all seven were identified and estimated with acceptable error by the ozonolysis-capillary gas chromatography-computer procedure. In a generalized approach to the analysis of the 55 possible nonconjugated isomers, a computer program selects the appropriate matrix of linear simultaneous equations based on the aldehyde data supplied by the analyst. Twenty of 21 combinations of seven isomeric esters taken five at a time have been analyzed to assess the efficiency of the method. To illustrate applicability at this stage of development, the method has been used to analyze the diene products of the hydrazine reduction of γ-linolenic acid and the diene products from the biological desaturation of isomeric monoenes. The possibility of distinguishing geometric and positional isomers of 18∶2 has been opened by the observed separation ofcis-andtrans-unsaturated aldehydes and aldehyde-esters. Presented in part at the 16th World Congress of the International Society for Fat Research, October 4–7, 1983, in Budapest, Hungary, and at the American Oil Chemists' Society Meeting, May 15, 1986, in Honolulu, Hawaii.