Trace gas measurement with an integrated porous tube collector/long-path absorbance detector

Porous membrane tubes filled with an absorbing solution that change colors upon selective reactions with specific gases provide high sensitivity inexpensive gas sensors. These can be routinely used for ambient monitoring in a fully automated manner. We consider both stopped and continuous flow operations and show the superiority of the stopped flow mode theoretically and experimentally. Light throughput through various membrane tubes is presented, and superior performance of such tubes over Teflon AF is shown. Sensors for NO2 and for O3 were based on Griess-Saltzman and indigotrisulfonate chemistries, respectively. A computer-controlled two-LED absorbance measurement system (one wavelength monitors the signal, the other references the system) that also governs automated reagent refilling was implemented. Sub-parts-per-billion-volume detection limits are attainable within a few minutes for both gases. Comparative data with a commercial UV-photometry-based ozone monitor showed excellent agreement with the response pattern of the present instrument. Low cost, ready applicability to the measurement of different gases by merely changing the light source and chemistry, and high sensitivity makes this instrument attractive for both pedagogic and practical purposes.     

A Microcomputer System for Spatiotemporal Visual Receptive Field Analysis

A microcomputer system was developed to measure visual spatiotemporal receptive fields. The system performs three functions: 1) generation of a binary spatiotemporal white-noise stimulus, 2) acquisition of spike discharges from retinal ganglion cells, and 3) extraction of the linear part of the spatiotemporal receptive flelds by cross correlating the input against the output. We have applied this system to the measurement of the spatiotemporal receptive fields of cat and catfish retinal ganglion cells.     

Software System for Neuron Classification Based on Simple Parameters

A software system was produced to digitize neuronal images and to extract a set of simple parameters from the digitized images. The system was designed to classify a large number of neurons based on simple and automatically extracted features. The system was used to characterize catfish retinal ganglion cells. Several examples of parameter extraction and classification are presented.     

Noninvasive Measurement of the Volume Elastic Modulus in Finger Arteries Using Photoelectric Plethysmography

A method for the nonivasive measurement of the volume elastic modulus (Ev) in human finger arteries was developed. The volume change ratio and pulse pressure in the arteries were simultaneously determined by a transmittance type infrared photoelectric plethysmograph and a volume oscillometric sphygmomanometer using an occlusive cuff. The Ev values could be obtained at a desired transmural pressure level of the arteries which was controlled by the cuff. A clear difference was revealed between the Ev values obtained in the fingers of two male subjects of 33 and 65 years old. The values determined by this method were compared to those calculated from pulse wave propagation velocity (Evp) obtained simultaneously in the fingers of 11 subjects. The linear regression equation was Ev = 1.31 Evp ?0.117 with a correlation coefficient r = 0.893 (n = 39). These results suggest that this should be a useful and noninvasive method of evaluating changes in arterial elasticity accompanying aging and perhaps influenced by accompanying hypertension or arteriosclerosis.     

First-Principles Study on the Grain Boundary Embrittlement of Metals by Solute Segregation: Part II. Metal (Fe,Al, Cu)-Hydrogen (H) Systems

The microscopic mechanism of grain boundary (GB) embrittlement in metals by hydrogen segregation (trapping) has been not well understood for many years. From first-principles calculations, we show here that the calculated cohesive energy of bcc Fe Σ3(111) and fcc Al(Cu) Σ5(012) symmetrical tilt GBs can be significantly reduced if many hydrogen atoms segregate at the GBs. This indicates that the reduction of the cohesive energy of the GB may cause the hydrogen-induced GB embrittlement in Fe, Al, and Cu. Considering the “mobile” effect of hydrogen during fracture, especially for the Fe system, more hydrogen atoms coming from solid solution state can segregate on the gradually formed two fracture surfaces and reduce further the cohesive energy. We suggest a new idea about the upper and lower critical stresses observed in the constant-load test of hydrogen-induced delayed fracture in high-strength steels; the upper critical stress is determined by the amount (density) of “immobile” hydrogen atoms segregated at the GB before fracture, and the lower critical stress is determined by the total amount (density) of immobile and mobile hydrogen atoms, the latter of which segregate on the two fracture surfaces during fracture.     

Trends in standardization on multimedia communications

The authors describe the activities of telecommunication and information standardization organizations, such as the ITU-T, ISO/IEC JTC1, and ISO/IEC related to multimedia communications. Achievements of the related fora and consortia, such as the ATM Forum, IETF, and DAVIC, which play important roles in standardizing multimedia applications, are also described