基底元素表面富集与扩散阻档层

根据An－Ag系统以及An－Cu系统的扩散系数计算，提出了扩散阻挡层模型。利用这个模型对Au－Ag系统进行有关实验，得利了较好的验证。     

混凝土结构非线性全过程分析中的迭代控制法研究

在深入研究各类迭代控制法的基础上，针对混凝土结构的非线性全过程分析，在常规的位移和弧长控制法中引入了简单适用的考虑路径搜寻和单因加速的方法，明显改善了收敛情况。     

灰铸铁石墨形态的研究

文本研究了化学成份与冷却速度及孕育处理对灰铸铁石、墨形态的影响．并对形成的地B、C、D、E、F等六种衣铸铁石墨形态的形成条件作了讨论．     

钛酸铅系薄膜的热释电性能及其应用

叙述了钛酸铅系薄膜的热释电原理，介绍了国际上近几年钛酸铅系薄膜材料、制备工艺及热释电性能，并与块状陶瓷材料进行了比较，分析表明钛酸铅系薄膜具有优良的热释电性能及可观的应用前景。     

高温超导研究的新进展

本文简要回顾了一年来高温超导的新进展，特别介绍和讨论了新型高温超导体系和线材、带材、块材及薄膜应用的发展情况。     

管内机器人研究中的几项新技术

介绍了我们研制的管内机器人中应用的具有创新性的三项技术：１．轮式全主动新型行走机构；２．内壁环带视觉装置；３．新型离心喷涂器。     

Machine assignment and part-families formation using group technology

The conventional way of solving the group technology (GT) problem is to start from an assignment of parts to machines and try to find a partitioning of machine cells and part families. The similarity between parts is measured based on commonality of the machines assigned to them. However, parts are assigned to machines based on their operation requirements and the operation capabilities of machines. Similarity between parts should be based on their required operations. In this paper, the authors attempt to solve or facilitate solving the GT problem at the assignment level. An algorithm for assigning parts to machines is provided which utilizes the types of operations required by parts and applies GT principles in producing the assignment. This leads to better partitioning of machine cells and part-families. Furthermore, operation sequences required by parts in determining the similarity between parts have been considered. An algorithm to form part-families based on the operation sequence similarity coefficient has been developed. The resulting families are then used by the assignment algorithm to produce machine assignments to part-families. The use of the algorithm is demonstrated by examples.     

小波分析及其在时变滤波和信号分离中的应用

利用小波变换具有的多时频分辨率特性，对地震勘探和测井信号这类非平衡信号进行分析，可以充分利用信号的时间－频率特性。文中介绍了小波变换的基本概念及其在地震勘探信号的时变滤波和声波全波列测井信号的信号分离中的应用，实例表明，小波变换在地球物理信号中具有广阔的应用前景。图５参７     

参考信号频率自调整的数字相敏检波器算法的研究

本文提出了一种不需要外接同频参考信号的数字相敏检波器算法。该算法首先提取计算机产生的参考信号与被测信号频率的差值，然后根据该差值调整参考信号的频率直到满足要求。本文还讨论了数字相敏检波器的幅频特性，仿真试验表明理论分析与实际结果是一致的。该算法可以用于同频参考信号不能获得时正弦信号的幅度和相位测量。     

The mechanics of compressive kinking in unidirectional fiber reinforced ductile matrix composites

Three distinct stages of kink band formation and propagation exist in ductile matrix composites subjected to compressive loading. These stages are called incipient kinking, transient kinking and kink band broadening. Each stage involves a different deformation mode. The mechanics governing each stage are discussed. Incipient kinking, where the peak load is attained, and kink band broadening, where the load attains a steady-state, are important in structural design. Two design philosophies are presented. References to pertinent literature are made throughout.