The heat transfer and pressure drop characteristics of finned tube banks in forced convection (effects of fin height on pressure drop characteristics)

In recent years the requirement for the reduction of energy consumption has been increasing to solve the problems of global warming and the shortage of petroleum resources. For example, in the power generation field, as thermal power generation occupied 60% of the power generation demand, considerable improvement of the thermal efficiency is required. This paper describes the pressure drop characteristics of finned tube banks used for heat exchangers in thermal power generation that were clarified by testing serrated finned tube banks with different fin heights for improved heat transfer and conventional spiral finned tube banks with different fin heights, and an equation to predict pressure drop which is necessary for the heat exchanger design is proposed. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(3): 179–193, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20112     

Collective Shape Oscillation and Domain Formation of Two-Component Bose–Einstein Condensates

In this paper, we describe two kinds of characteristic nonlinear dynamics in two-component Bose–Einstein condensates. For two overlapping components, we analyzed the collective modes and a variety of nonlinear mode couplings, which were then confirmed by numerical simulation of the time-dependent Gross–Pitaevskii equations. Next, we consider the nonlinear dynamics of two condensates after abruptly turning on the intercomponent coupling strength. For strong intercomponent interactions the out-of-phase density wave of the condensates became unstable, leading to mugtiple domain formation.     

Development of next generation PWR in Japan

The demand for energy in Japan is expected to increase steadily into the future, and it seems that the importance of nuclear power generation will be heightened more when the situation of our country which is not rich in energy resources is taken into account.

Furthermore, when we consider the present situation that the light water reactors have become common, recent outlook for the supply and demand for uranium resources, trends in the development of the fast breeder reactor technology, etc., the light water reactors are expected to remain dominant in the nuclear power generation of our country until at least the second half of the 21st century.

Based on such a background five PWR utilities in Japan (Hokkaido, Kansai, Shikoku, Kyushu, and the Japan Atomic Power), and Mitsubishi Heavy Industries, Ltd. have jointly started researching the Next Generation PWR which is expected to be the leading nuclear power plant taking place of APWR.     

Bilateral polynomial matrix equations in two indeterminates

Two special cases of the bilateral 2-D polynomial matrix equationDU +VN=C whenC=I andC=I with being a -stable 2-D polynomial, which are related respectively to deadbeat and asymptotic control problems of 2-D systems, are first considered. By generalizing the concepts of factor coprimeness, zero coprimeness and zero skew primeness in the 2-D polynomial ring to the ring of causal -stable 2-D rational functions, a constructive solution of these two problems mentioned is proposed. Based on these results, we derive a solvability condition for the bilateral equiation whereC is a general 2-D polynomial matrix. The general solutions are investigated as well.     

Photolytic crosslinking of poly(p-hydroxystyrene)

Light-induced crosslinking of poly(p-hydroxystyrene) (PPHS) is significantly enhanced by O₂. This was evidenced by molar mass (light scattering measurements) and by gel content determinations which were performed on various polymer samples before and after continuous irradiation at λ_inc = 254 nm. The following mechanism was elucidated with the aid of flash photolysis studies: Crosslinking in the absence or presence of O₂ is mainly due to the combination of phenoxyl type radicals. In the absence of O₂ the latter are exclusively formed by O? H bond cleavage of singlet excited phenolic groups. Triplet excited phenolic groups which are also formed do not deactivate via O? H bond cleavage but react very effectively with O₂. This reaction leads to the formation of HO and additional phenoxyl type radicals. All Commercial and most laboratory-prepared PPHS samples contain chemically bound impurities of quinoid nature. On the basis of results performed with model compounds of low molar mass, it is concluded that triplet excited quinoid groups react effectively with phenolic groups forming phenoxyl type radicals and that they are quite unreactive with respect to the abstraction of alphatic hydrogen atoms. Irradiation of PPHS at λ_inc = 254 nm causes the formation of quinoid groups which absorb strongly at this wavelength. Light absorption by these groups becomes a determining factor with respect to photochemical alteration in the course of further irradiation.     

Adsorption properties of oxygen and methane on Ga-ZSM-5; the origin of the selectivity of NOx reduction using methane

The adsorption properties of oxygen and methane on Ga-ZSM-5 and Cu-ZSM-5 catalysts were examined by a TPD method to clarify the extraordinary selectivity of HC-SCR using methane on Ga-ZSM-5. It was observed that Ga-ZSM-5 did not adsorb oxygen but adsorbed methane dissociatively, while on Cu-ZSM-5 oxygen was dissociatively adsorbed and reacted with adsorbed ethylene.     

Face relighting using discriminative 2D spherical spaces for face recognition

As part of the face recognition task in a robust security system, we propose a novel approach for the illumination recovery of faces with cast shadows and specularities. Given a single 2D face image, we relight the face object by extracting the nine spherical harmonic bases and the face spherical illumination coefficients by using the face spherical spaces properties. First, an illumination training database is generated by computing the properties of the spherical spaces out of face albedo and normal values estimated from 2D training images. The training database is then discriminately divided into two directions in terms of the illumination quality and light direction of each image. Based on the generated multi-level illumination discriminative training space, we analyze the target face pixels and compare them with the appropriate training subspace using pre-generated tiles. When designing the framework, practical real-time processing speed and small image size were considered. In contrast to other approaches, our technique requires neither 3D face models nor restricted illumination conditions for the training process. Furthermore, the proposed approach uses one single face image to estimate the face albedo and face spherical spaces. In this work, we also provide the results of a series of experiments performed on publicly available databases to show the significant improvements in the face recognition rates.     

Impregnation of silk sericin into polyester fibers using supercritical carbon dioxide

Silk sericin was impregnated into polyester fabric using supercritical carbon dioxide (SCCO₂) to overcome polyester hydrophobicity. The effects of sericin molecular weight, pH of sericin, solution and cosolvent types on sericin impregnation were investigated. Enzyme‐hydrolyzed, acid‐, based‐hydrolyzed sericin in SCCO₂, and a 30 kDa sericin in SCCO₂ modified with cosolvents such as water, methanol, 1‐propanol, and acetone; and a modifier: sodium hydroxide solution were used in this work. Impregnation of sericin in polyester was indicated by Fourier transform infrared spectrophotometry (FTIR) and dyeing with acid dye. Degradation of polyester fibers during SCCO₂ process was indicated by scanning electron microscopy (SEM). Methylene blue dyeing was used to realize carboxyl group in polyester. The results showed no impregnation of sericin into polyester by using SCCO₂ modified with cosolvents. However, sericin was impregnated into modified surface polyester since hydrophilic groups such as carboxyl and hydroxyl groups were regenerated by alkaline hydrolysis. Samples impregnated with hydrolyzed sericin showed high color strength of Supranolechtbordeaux B acid dye. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Thermotropic polyarylates derived from substituted hydroquinones and p-terphenyl-4,4″-dicarboxylic acid

Polyarylates from substituted hydroquinones (HQs) and p-terphenyl-4,4″-dicarboxylic acid (TPDA) that were modified with 1,2-bis(phenoxy)ethane-4,4′-dicarboxylic acid (PEC), 1,2-bis(2-chlorophenoxy)ethane-4,4′-dicarboxylic acid (ClPEC), terephthalic acid (TA) and p-hydroxybenzoic acid (HBA) were prepared and their thermal and mechanical properties were investigated. These polyarylates exhibited liquid crystallinity at about the same temperatures as polyarylates derived from substituted HQs and 4,4′-diphenyldicarboxylic acid (BB). However, as-spun fibers and injection-molded specimens of these polyarylates exhibited lower moduli than those of substituted HQs and BB that were modified with PEC, Cl-PEC and TA.