Treatment capability of an up-flow anammox column reactor using polyethylene sponge strips as biomass carrier

The feasibility of applying a polyethylene (PE) sponge as a biomass carrier in an anaerobic ammonium oxidation (anammox) reactor and its nitrogen removal performance were also investigated. Experiments were carried out in an up-flow column reactor with synthetic inorganic wastewater. Experimental results indicate that reactor containing PE sponge biomass carriers showed a high nitrogen removal capability and exhibited stable performance. In addition, the reactor with 8 strips PE sponge as biomass carrier exhibited greater adaptation capacity compared to that with 6 strips and could achieve a high TN removal rate within a very short period. The ratio of NO₂-N removal and NO₃-N production to NH₄-N removal for the reactor was 1.26:0.21. Furthermore, to investigate the bacterial composition of the mature community, 16S rRNA sequences were amplified by PCR and analyses were conducted using DNA databases. Results showed that a new kind of anammox microorganism (Kumadai-1) was the dominant species in the reactor when using PE sponge as a biomass carrier.     

Switched capacitor circuit for 1/f noise generation using a power-law circuit

A simple switched capacitor (SC) circuit is given which realizes a one-dimensional discrete dynamical system X_n+1 = X_n + ux^z generating intermittent chaos with a 1/f-shaped power spectrum. an integrated circuit with a pair of logarithmic and antilogarithmic amplifiters can easily realize the power-law term x^z which plays a key role in generating l/fnoise. an inevitable small offset voltage ? in the SC circuit governs the cut-off frequency of 1/f noise, and when the dynamical system is modified by introducing an effective ?, the ‘indirect method’ enables us to get the precise power spectrum in the modified system.     

Novel method for driving the ultrasonic motor

This paper reports a novel driving method for an annular plate-type ultrasonic motor. Instead of the direct current/alternating current (DC/AC) converter type driver using a conventional electromagnetic transformer, a compact disc-type piezoelectric transformer is used to obtain a high voltage output for driving the ultrasonic motor. The piezoelectric transformer is operated in the radial vibration mode at resonance frequency close to the resonance frequency of the ultrasonic motor. Later, it was found that the piezoelectric transformer could drive the ultrasonic motor, even if their resonance frequencies are not exactly the same by incorporating a matching network in the circuit. The maximum speed of the ultrasonic motor obtained by using this driving method is over 300 rpm. It is believed that the results of this study will have impact on the integration and miniaturization of the ultrasonic motor and its driving circuit.     

Three-layer flow membrane system on a microchip for investigation of molecular transport

A stable three-layer flow system, water/organic solvent/water, has been successfully applied for the first time in a microchannel to get rapid transport through an organic liquid membrane. In the continuous laminar flow region, the analyte (methyl red) was rapidly extracted across the microchannel from the donor to the acceptor phase through the organic solvent phase (cyclohexane). Thermal lens microscopy was used to monitor the process. The thickness of the organic phase, sandwiched by the two aqueous phases, was approximately 64 microm, and it was considered as a thin liquid organic membrane. Permeability studies showed the effects of molecular diffusion, layer thickness, and organic solvent-water partition coefficient on the molecular transport. In the microchip, complete equilibration was achieved in several seconds, in contrast to a conventionally used apparatus, where it takes tens of minutes. The thickness of the organic and aqueous boundary layers was defined as equal to the microchannel dimensions, and the organic solvent-water partition coefficient was determined on a microchip using the liquid/liquid extraction system. Experimental data on molecular transport across the organic membrane were in agreement with the calculated permeability based on the three-compartment water/organic solvent/water model. This kind of experiment can be performed only in a microspace, and the system can be considered as a potential biological membrane for future in vitro study of drug transport.     

Two-color photorefractive effect in Mg-doped lithium niobate

The two-color photorefractive response of near stoichiometric lithium niobate (SLN) doped with Mg above a critical threshold has been investigated. Striking differences as compared with non Mg-doped material were observed: The intermediate level in the two-color writing process has approximately a two orders of magnitude longer lifetime in SLN:Mg than in nominally undoped SLN, the grating is written in a shallower level but can be fixed via a simple thermal process and complementary electron-hole gratings are formed. It is proposed that the Fe impurity level moves from below the small-polaron level in nonMgO-doped material to above it, resulting in the increased lifetime of the small polaron. These changes are associated with a shift of the Fe from a Li site to a Nb site. The two-color sensitivity is higher than in the absence of MgO but the dynamic range is much lower.     

Characterization of the microbial community in an anaerobic ammonium-oxidizing biofilm cultured on a nonwoven biomass carrier

The enrichment and characterization of anaerobic ammonium-oxidizing biofilm cultures are ongoing in our laboratories. Biomass, with a predominately red color, demonstrating simultaneous removal of ammonium and nitrite under autotrophic and anoxic conditions, which is characteristic of anaerobic ammonium-oxidizing planctomycetes, was enriched and maintained for an extended period on a polyester nonwoven carrier. To investigate the bacterial composition of the mature biofilm community, 16S rDNA sequences were amplified by PCR and comparative analyses using DNA databases were conducted. Only one sequence had a notable similarity (92.2%) to that of the first discovered anaerobic ammonium-oxidizing planctomycete and lesser, yet significant, similarities to the 16S rDNA sequences of other recently reported anaerobic ammonium-oxidizing strains. The newly discovered strain (designated KSU-1) reported here was dominant among detectable members of the biofilm community. By fluorescence imaging, KSU-1 was shown to form spherical clusters wrapped in a thin layer of Zoogloea sp. Possible interactions and interdependencies of these two species are discussed with regard to the putative unculturability of the anaerobic ammonium-oxidizing planctomycetes.     

Ammonia assimilation in Klebsiella pneumoniae F-5-2 that can utilize ammonium and nitrate ions simultaneously: purification and characterization of glutamate dehydrogenase and glutamine synthetase

The two ammonia-assimilating enzymes glutamate dehydrogenase (GDH; EC 1.4.1.4) and glutamine synthetase (GS; EC 6.3.1.2) were synthesized steadily during the cell growth of Klebsiella pneumoniae F-5-2 that can utilize NH4+ and NO3- simultaneously under aerobic conditions. The enzymes were purified to homogeneity from cell extracts and characterized. The molecular mass of the purified GDH was 300 kDa with six identical 52-kDa subunits. GDH showed its maximal activity (aminating) at pH 8.0 and was stable between pHs 5.5 and 11.5. The enzyme was NADP-specific and strongly inhibited by Ag+. It catalyzed the amination of 2-ketovalerate, 2-ketoadipate, and 2-ketobutyrate, in addition to 2-ketoglutarate. The purified GS has a molecular mass of 470 kDa with eight identical 60-kDa subunits. GS showed its maximal activity at pH 8.0 and was stable between pHs 6.0 and 7.0. The enzyme was strongly inhibited by Fe3+, Hg2+, and Cu2+.     

Synchronized fresh cell bioreactor system for continuous L-(+)-lactic acid production using Lactococcus lactis IO-1 in hydrolysed sago starch

An efficient bioreactor, termed a 'synchronized fresh cell bioreactor', was developed and consisted of a pH-dependent substrate feed system coupled with cross flow filtration and turbidity control. The effect of high dilution rate and high cell density coupled with high cell viability on the production of l-lactic acid in continuous culture by Lactococcus lactis IO-1 in enzyme-hydrolysed sago starch medium was investigated. For all changes in dilution rate, cells responded in a synchronized way to the addition of glucose by increasing the rate of biomass formation. Consequently, a glucose-free feed solution was required to maintain the cell concentration at a particular pre-set value. This set-up facilitated the maintenance of the cells in a permanent log phase. At a cell concentration of 15 gl(-1) and a feed glucose concentration of 53 gl(-1), volumetric LA productivities of 8.2, 19.3 and 33.1 gl(-1)h(-1) were obtained at dilution rates of 0.21, 0.50 and 1.1 h(-1), respectively. The respective residual glucose concentrations in the spent medium were 1.90, 0.24 and 3.80 gl(-1). By increasing the cell density, the volumetric productivity increased proportionally. At high cell density, higher dilution rates resulted in lower lactate concentrations in the culture medium resulting in higher productivity. This reactor facilitated efficient operation with high cell viability by maintaining the cells in continuous growth phase for long-term fermentation. Therefore, the growth rate (mu) was calculated according to the Monod equation. Using this system, high specific productivities can be obtained which guarantees high commercial productivity at economical cost with only a small investment for setting up the sago industry.     

Reliability of signals from a chronically implanted, silicon-based electrode array in non-human primate primary motor cortex.

Multiple-electrode arrays are valuable both as a research tool and as a sensor for neuromotor prosthetic devices, which could potentially restore voluntary motion and functional independence to paralyzed humans. Long-term array reliability is an important requirement for these applications. Here, we demonstrate the reliability of a regular array of 100 microelectrodes to obtain neural recordings from primary motor cortex (MI) of monkeys for at least three months and up to 1.5 years. We implanted Bionic (Cyberkinetics, Inc., Foxboro, MA) silicon probe arrays in MI of three Macaque monkeys. Neural signals were recorded during performance of an eight-direction, push-button task. Recording reliability was evaluated for 18, 35, or 51 sessions distributed over 83, 179, and 569 days after implantation, respectively, using qualitative and quantitative measures. A four-point signal quality scale was defined based on the waveform amplitude relative to noise. A single observer applied this scale to score signal quality for each electrode. A mean of 120 (+/- 17.6 SD), 146 (+/- 7.3), and 119 (+/- 16.9) neural-like waveforms were observed from 65-85 electrodes across subjects for all recording sessions of which over 80% were of high quality. Quantitative measures demonstrated that waveforms had signal-to-noise ratio (SNR) up to 20 with maximum peak-to-peak amplitude of over 1200 microv with a mean SNR of 4.8 for signals ranked as high quality. Mean signal quality did not change over the duration of the evaluation period (slope 0.001, 0.0068 and 0.03; NS). By contrast, neural waveform shape varied between, but not within days in all animals, suggesting a shifting population of recorded neurons over time. Arm-movement related modulation was common and 66% of all recorded neurons were tuned to reach direction. The ability for the array to record neural signals from parietal cortex was also established. These results demonstrate that neural recordings that can provide movement related signals for neural prostheses, as well as for fundamental research applications, can be reliably obtained for long time periods using a monolithic microelectrode array in primate MI and potentially from other cortical areas as well.     

Flow resistance of a liquid droplet confined between two hydrophobic surfaces

Flow resistance of a liquid droplet confined between two hydrophobic surfaces has been investigated experimentally and factors contributing to the flow resistance have been studied. A water droplet has been sheared between two hydrophobic surfaces and shear resistance has been measured. The experimental results show that the shear resistance at low shear velocities is primarily caused by asymmetrical surface tension due to the contact angle hysteresis. A droplet on a rough hydrophobic surface remains almost symmetrical under shear and exhibits extremely low friction. The shear resistance at high shear velocities is affected by viscous force. Furthermore, sliding angles of water droplets on micropatterned hydrophobic surfaces have been measured to clarify the effects of surface topography on flow resistance. Surfaces with many prismatic structures raised out of the plane tend to exhibit low sliding angles.