Laboratory study of air-water-coal combustion product (fly ash and FGD solid) mercury exchange

Recent laboratory research has indicated that coal fly ash derived from subbituminous and bituminous type coals is a sink for atmospheric mercury (Hg), however lignite-based ash was found to emit Hg to the air. Solids collected from systems with components that enhance Hg removal (i.e. activated carbon injection (ACI), flue gas desulfurization (FGD), and selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR)) may have higher Hg concentrations and therefore a higher potential for Hg release. For this study we investigated the potential for Hg release to the air and water from coal combustion products (CCPs) collected from coal-fired units with FGD equipment, SCR and SNCR equipment, and sorbent injection for Hg removal. In the laboratory study, most dry samples acted as sinks for atmospheric Hg in the dark at 25 °C. When exposed to light or increased temperature (45 °C), deposition of Hg to the fly ash substrates in most cases continued but decreased. Wet FGD samples emitted Hg. However, they became a sink for atmospheric Hg or exhibited low Hg emission rates when dried. Mercury flux in the dark at 25 °C was correlated with fly ash carbon content (LOI). Most liquid extracts derived using the synthetic precipitation leaching procedure (SPLP EPA method 1312) had very low Hg concentrations (<13 ng/l).     

Measurement of Crack Tip Displacement Fields in Mixed Mode I–Mode III Fracture

A new method has been devised to propagate stable subcritical mixed mode I–mode III cracks in soda–lime–silicate and borosilicate glasses. The mode I content was measured using an original optical tunneling technique and mode III content via multiple-beam interferometry. Measurement of the mode III displacement field allows values of mode III fracture toughness, K_III, to be derived. K_III vs crack velocity (v) diagrams have been constructed for both glasses, and, in the case of the soda–lime–silicate glass, v vs K_III relationships have been determined for a variety of humidities. Comparison has been made with published K_I vs v data for this glass.     

Kinetics of droplet growth in liquid—liquid phase separation of polymer—diluent systems: experimental results

Liquid—liquid thermally induced phase separation of the polymer—diluent system isotactic poly(propylene)—diphenyl ether was studied under an optical microscope. It was found that as the system phase separated, droplets of a diluent-rich phase formed within a polymer-rich matrix. These droplets grew in size and decreased in number by a process known as coarsening. The scaling exponent relating droplet diameter and time was determined. The scaling exponent was found to be a strong function of the droplet phase volume fraction, and this strong dependence on volume fraction was relatively insensitive to temperature. The influence of the ratio of interfacial tension between the phases and the viscosity of the matrix phase was less significant on the growth rate of the droplets.     

A New Approach to Two-View Motion Segmentation Using Global Dimension Minimization

We present a new approach to rigid-body motion segmentation from two views. We use a previously developed nonlinear embedding of two-view point correspondences into a 9-dimensional space and identify the different motions by segmenting lower-dimensional subspaces. In order to overcome nonuniform distributions along the subspaces, whose dimensions are unknown, we suggest the novel concept of global dimension and its minimization for clustering subspaces with some theoretical motivation. We propose a fast projected gradient algorithm for minimizing global dimension and thus segmenting motions from 2-views. We develop an outlier detection framework around the proposed method, and we present state-of-the-art results on outlier-free and outlier-corrupted two-view data for segmenting motion.     

Comparison of the construction of a 3-D model for human thromboxane synthase using P450cam and BM-3 as templates: implications for the substrate binding pocket

A 3-D model of human thromboxane A₂ synthase (TXAS) was constructedusing a homology modeling approach based on information fromthe 2.0 crystal structure of the hemoprotein domains of cytochromeP450BM-3 and P450cam. P450BM-3 is a bacterial fatty acid monooxygenaseresembling eukaryotic microsomal cytochrome P450s in primarystructure and function. TXAS shares 26.4% residue identity and48.4% residue similarity with the P450BM-3 hemoprotein domain.The homology score between TXAS and P450BM-3 is much higherthan that between TXAS and P450cam. Alignment between TXAS andthe P450BM-3 hemoprotein domain or P450cam was determined throughsequence searches. The P450BM-3 or P450cam main-chain coordinateswere spplied to the TXAS main chain in those sements where thetwo sequences were well aligned. These segments were linkedto one another using a fragment search method, and the sidechains were added to produce a 3-D model for TXAS. A TXAS substrate,prostaglandin H₂ (PGH₂) was docked into the TXAS cavity correspondingto the arachidonic acid binding pocket in P450BM-3 or camphorbinding site in P450cam. Regions of the heme and putative PGH2binding cavities in the TXAS model were identified and analyzed.The segments and residues involved in the active-site pocketof the TXAS model provide reasonable candidates for TXAS proteinengineering and inhibitor design. Comparison of the TXAS modelbased on P450BM-3 with another TXAS model based on the P450BM-3with another TXAS model based on the P450cam structure indicatedthat P450BM-3 is a more suitable template for homology modelingof TXAS.     

The effect of stabilizing agents on the hydration rate of β-C2S

Small quantities (<2%) of various metal oxides are incorporated into the lattice of β-C₂S during the high temperature preparation. The effect which these stabilizers have on the hydration rate is examined. A model involving the charge/radius ratio of the metal ion is developed to explain altered hydration rates. This charge/ radius ratio model also proves useful in describing the crystal-chemical stabilization of β-C₂S. In addition, the solubility of Cr₂O₃ in β-C₂S is determined by a novel differential thermal analysis technique.     

Non-Isothermal crystallization of isotactic polypropylene in dotriacontane. II: Effects of dilution,cooling rate,and nucleating agent addition on growth rate

Non-isothermal crystallization growth rates of nucleated and non-nucleated isotactic polypropylene (iPP) in dotriacontane were determined experimentally by thermal optical microscopy. Adipic acid was used as the nucleating agent. The non-isothermal growth rates of the nucleated and non-nucleated systems were compared with experimentally determined isothermal growth rates. The Lauritzen and Hoffman growth rate equation, originally developed for isothermal crystallization, was modified to describe the non-isothermal growth. The modified Lauritzen-Hoffman equation was used to predict isothermal growth rates from non-isothermal crystallization for the nucleated and non-nucleated polymer-diluent mixtures. This study is the first to deal with polymer-diluent-nucleating agent systems vital to membrane production.     

Towards an Environmentally Acceptable Heterogeneous Catalytic Method of Producing Adipic Acid by the Oxidation of Hydrocarbons in Air

A survey is given of the catalytic methods potentially available for the production of adipic acid by the oxidation of readily available hydrocarbon precursors under environmentally benign conditions. Encouraging results are reported using H₂O₂ as oxidant and microporous FeAlPO-5 as catalyst at moderate temperatures.     

Effects of dietary casein and soy protein on metabolism of radiolabelled low density apolipoprotein B in rabbits

Rabbits fed semipurified diets containing casein have elevated plasma cholesterol levels compared to those fed soy protein. As part of continuing studies on the mechanism of casein-induced hypercholesterolemia, two groups of six rabbits were fed these diets for 14 to 16 weeks. Animals fed the casein diet were found to have significantly higher plasma concentrations of protein, cholesterol, triacylglycerol, phospholipid and apolipoprotein B (apo B) associated with low density lipoprotein (LDL) than those fed the soy protein diet. Kinetic studies showed that the fractional catabolic rate of LDL-apo B was significantly lower in animals fed casein than in those fed soy protein regardless of whether the tracer LDL was obtained from donors fed casein or soy protein. The production rate of LDL-apo B was higher in casein-fed animals but this was not statistically significant. These results show that the efficiency of removal of LDL is significantly reduced in animals fed casein compared to those fed soy protein, and that the source of LDL did not affect the efficiency of its subsequent removal. The acumulation of LDL in casein-fed animals is consistent with down-regulation of the LDL receptor.     

Synthesis of Kenyaite, Magadiite and Octosilicate Using Poly(ethylene glycol) as a Template

Three types of layered silicates, namely octosilicate, magadiite and kenyaite, were synthesized using poly(ethylene glycol) (PEG). The influence of reaction parameters, including alkali source, silica source, PEG molecular weight, reaction time and temperature, on the formation of these three phases was investigated. The results indicate that magadiite is preferred when (i) using NaOH as the alkali source and at a lower temperature (150°C), with fumed silica, tetramethyl orthosilicate (TMOS), tetraethyl orthosilicate (TEOS), Ludox-AS 40 or colloidal sol acting as the silica source in the presence of PEG 200; (ii) using fumed silica as the silica source and PEG 300 as the template at 150°C; (iii) at a higher temperature (180°C), using PEG 200 as template and TEOS as the silica source; and (iv) at 180°C with a combination of PEG 300 and fumed silica. Compared to magadiite, kenyaite was favored at a higher temperature (180°C) with PEG 200 and NaOH, KOH or RbOH, while using fumed silica, silica gel, or colloidal sol as silica source; or at the lower temperature (150°C) using NaOH as alkali source, PEG 200 as template, and silica gel or silicic acid as the silica source. Octosilicate was obtained at 90°C with the combination of NaOH, PEG 200 and fumed silica.