Detection of relative and uniform motion

We measured the lowest velocity (velocity threshold) for discriminating motion direction in relative and uniform motion stimuli, varying the contrast and the spatial frequency of the stimulus gratings. The results showed significant differences in the effects of contrast and spatial frequency on the threshold, as well as on the absolute threshold level between the two motion conditions, except when the contrast was 1% or lower. Little effect of spatial frequency was found for uniform motion, whereas a bandpass property with a peak at approximately 5 cycles per degree was found for relative motion. It was also found that contrast had little effect on uniform motion, whereas the threshold decreased with increases in contrast up to 85% for relative motion. These differences cannot be attributed to possible differences in eye movements between the relative and the uniform motion conditions, because the spatial-frequency characteristics differed in the two conditions even when the presentation duration was short enough to prevent eye movements. The differences also cannot be attributed to detecting positional changes, because the velocity threshold was not determined by the total distance of the stimulus movements. These results suggest that there are two different motion pathways: one that specializes in relative motion and one that specializes in uniform or global motion. A simulation showed that the difference in the response functions of the two possible pathways accounts for the differences in the spatial-frequency and contrast dependency of the velocity threshold.     

Histidine 210 mutant of a trypsin-type Achromobacter protease I shows broad optimum pH range

Achromobacter protease I (API), a lysine-specific serine protease, shows one order of magnitude higher activity than bovine trypsin, while its optimum pH is in the alkaline region at about pH 9. To improve the optimum pH range, mutant enzyme His 210 replaced by Ser(H210S), Ala (H210A), and Lys (H210K) were constructed. The optimum pH of H210S shifted from about pH 9 (wild-type enzyme) to about pH 7, retaining its high activity. The putative electrostatic interaction between His 210 and catalytic Asp 113 was elucidated by the optimum-pH shift of H210K and H210A. These results indicate that this unconserved His 210 in API, which plays a key role in generating the useful peptidase, broadened the optimum-pH range without decreasing lysylendo-peptidase activity.     

Laser Thomson scattering and optical emission studies of striated PDP micro‐discharge plasmas

Abstract— Properties of a plasma‐display‐panel (PDP) like discharge were examined by emission and laser Thomson scattering (LTS) measurements. Emission measurements were performed using an intensified CCD camera. By varying several external parameters such as the amplitude of the input voltage, gas composition, and pressure, the influence of these parameters on the discharge behavior was studied. Results of emission measurements showed that they were in good agreement with similar emission measurements on real PDP cells. LTS measurements were performed for the striated PDP‐like discharge at a pressure of 100 Torr and the results showed clear modulations in both profiles of electron density and electron temperature.     

Mechanical fibre optic switching using p.v.d.f. bimorph

An optical fibre switching element has been constructed, based on the electromechanical deformation of a bimorph of piezoclectric polymer, p.v.d.f. (polyvinylidene fluoride). Light transmitted through a fibre was switched between two other fibres situated next to each other by the application of the voltage of 3.5 V r.m.s. at 10 Hz. The insertion loss of this element was 0.7 dB.     

Effect of stress wave shape on the crack propagation velocity in cyclic delayed failure

Crack propagation velocity in delayed failure under superposed repeating load, ($\text{d}\text{a/}\text{d}\text{t)}{}_{\mathrm{R}}$, was compared with that under static load, ($\text{d}\text{a/}\text{d}\text{t)}{}_{\mathrm{S}}$Two peaks appear on the relation between decreasing rate of crack propagation velocity, $\text{1-β = 1 ? (}\text{d}\text{a/}\text{d}\text{t))}{}_{\mathrm{R}}\text{/(}\text{d}\text{a/}\text{d}\text{t)}{}_{\mathrm{S}}$ and frequency, ?, both under sinusoidal and square load. By changing the ratio of holding time at maximum stress intensity factor to that at minimum stress intensity factor in square load, it was deduced that the existence of two peaks on the 1 ? β vs $\text{f}$ curve was caused by an asymmetric interaction between hydrogen atoms and cyclic moving of the position with triaxial tensile stress at crack tip. Moreover, the relation between 1 ? β and $\text{f}$ under the positive or negative saw tooth load could be well explained by the interaction model.     

Electrochemical curing of epoxy resins

An electrochemical method has been developed for bonding electrically-conductive adherends. The procedure is based on the electrochemical generation of a curing agent from an otherwise chemically-unreactive precursor mixed with an epoxy resin sandwiched between the bonding members. The one-part epoxy resin is storage stable and cured rapidly on passage of current.     

Cell cycle analysis of Chinese hamster ovary cells stimulated by phosphatidic acid in serum-free culture

When recombinant Chinese hamster ovary cells were treated with pertussis toxin or genistein, not only lysophosphatidic acid (LPA) but also phosphatidic acid (PA) failed to stimulate progression through the cell cycle in serum-free culture, suggesting that PA and LPA induce cell growth through the same signal transduction pathway. Cell cycle analysis also indicates that cell growth promoted by PA results in enhanced protein production.     

A torsional transducer through in-plane shearing of paired planar piezoelectric elements

A torsional microtransducer for high-power applications was developed using standard bulk lead zirconium titantate (PZT) placed upon a small rectangular prism made from phosphor bronze, with a tapered conical end serving as a horn and a machined interior to improve the actuator's response. Torsion was obtained from a prototype at the design frequency of 192 kHz as well as over a wide range of frequencies from 136 kHz to 1.02 MHz. Torsional vibration velocities of 335 mm/s at 192 kHz were measured at 27.3 V(RMS) on the 1.5-mm diameter output tip, amounting to 25,600 degree/s vibration velocity along the outer circumference of the tip. At 1.02 MHz, a torsional vibration velocity of 1750 mm/s (134,000 degree/s) at 17.8 V(RMS) was obtained through use of the thickness mode of the PZT elements. Using the design described in this study, high-power torsional transducers with diameters of 5 mm and below are now possible.     

Consideration on Call Processing Function Distribution to Subscriber Terminal

This paper proposes a new sharing of call processing functions between a terminal and a switching system, taking recent technology advances into consideration. Information and its processing in an electronic switching system are defined and their calculation method is shown to discuss the function share. Numerical examples of information and its processing amount are obtained using NTT's commercial system, D-10, for an example. Possibility of function distribution to a subscriber terminal is discussed, based on information and its processing amount obtained by the analysis. The amounts of information and its processing in an existing switching system are estimated to both be reduced to about 35 percent by distributing to a terminal function, such as subscriber's action detection, audible signal generation, dialed number storage and display and so on. On the other hand, the information and its processing amount shared by the functional terminal are estimated to amount equivalently only to 5 and 10 percent respectively of those of an existing switching system, because introduction of functional terminals eliminates conventionally required time urgent information processing. Therefore, the total information and its processing amount in the telephone system incorporating functional terminals are estimated to be about 40 and 45 percent of those solely shared by an existing switching system, respectively. It is also mentioned that the functional terminal guarantees the variety of services which enables economical use of the telecommunication network.