围挡式洁净区的单向流特性研究

通过实验分析围挡式洁净区的3个特性指标，即：流线平行度、乱流度和下限风速，并指出其应用价值和市场前景。     

Creation of Nonspherical Microparticles through Osmosis‐Driven Arrested Coalescence of Microfluidic Emulsions

Droplet‐based microfluidics enable the production of emulsions and microparticles with spherical shapes, but the high‐throughput fabrication of nonspherical emulsions and microparticles still remains challenging because interfacial tension plays a dominant role during preparation. Herein, ionic liquids (ILs) containing salts, which possess sufficient osmotic pressure to realize water transport and phase separation, are introduced as inner cores of oil‐in‐oil‐in‐water double emulsions and it is shown that nonspherical emulsions can be constructed by osmosis‐driven arrested coalescence of inner cores. Subsequently, ultraviolet polymerization of the nonspherical emulsions leads to nonspherical microparticles. By tailoring the number, composition, and size of inner cores as well as coalescence time, a variety of nonspherical shapes such as dumbbell, rod, spindle, snowman, tumbler, three‐pointed star, triangle, and scalene triangle are created. Importantly, benefitting from excellent solvency of ILs, this system can serve as a general platform to produce nonspherical microparticles made from different materials. Moreover, by controlling the osmotic pressure, programmed coalescence of inner cores in double emulsions is realizable, which indicates the potential to build microreactors. Thus, a simple and high‐throughput strategy to create nonspherical microparticles with arrested coalescence shapes is developed for the first time and can be further used to construct novel materials and microreactors.     

Evaluation of Fatigue Crack Orientation Using Non-collinear Shear Wave Mixing Method

In this paper, a non-collinear shear wave mixing technique is proposed for evaluation of fatigue crack orientation. Numerical analysis of the nonlinear interaction of two shear waves with crack is performed using two-dimensional finite-element simulations. The simulation results show that the nonlinear interaction of the two shears waves with cracks leads to the generation of transmitted and reflected sum-frequency longitudinal waves (SFLW), moreover the propagation direction of reflected SFLW is correlated with the orientation of crack, which can be used for crack orientation evaluation. Non-collinear wave-mixing experiments were conducted on specimens with fatigue crack. The experimental results show that the directivity of the generated SFLW agrees well with the simulation results, and non-collinear shear wave mixing has potential use in fatigue crack orientation evaluation.     

制造企业基于Internet的设备远程诊断与维护系统研究

介绍了一个用于汽车发动机自动生产线的远程监控与诊断系统的结构与功能,对系统实现的有关关键技术进行了探讨,并给出了运行实例。     

Effect of selective laser melting on microstructure and properties of AZ91D alloy

Selective laser melting technology is used to manufacture porous and solid AZ91D alloys. The effects of laser power and hatch spacing on the density, blowholes, microstructure and mechanical properties of AZ91D alloy are studied. The laser power and hatch spacing play a significant role in the density and blowholes of AZ91D specimens. The grains size of specimens increases from 1 μm–2 μm to 8 μm–10 μm from the bottom to the top in single molten pool. Compared with grain size of die‐casting alloy (30 μm), that of selective laser melted gets refinement. There is no significant change in microstructure in the bottom, middle and top of specimens. The micro‐hardness of AZ91D alloy, reaching up to 115.3 HV 0.1, is superior to that of die‐casting alloy (56 HV 0.1). The compression properties of porous and solid specimens reach the degree of die‐casting solid magnesium alloy. AZ91D alloy shows the potential in the application of medical biodegradable materials.     

氦原子间的范德瓦尔斯力与其半经验势函数的拼接构造

为了确定氦原子势函数的具体形式,通过分析氦原子间的范德瓦尔斯作用力,指出氦原子势函数可由其范德瓦尔斯排斥势和吸引势拼接构造而成,并得出了氦原子通用势函数的具体形式.结果表明:对于氦原子势函数,排斥力不再适宜采用原子中心间距r的-12次方的形式,而更适合采用指数形式的排斥项,因此其势函数通用形式中包括指数型排斥项以及分别...     

Ultrasensitive aptamer-based multiplexed electrochemical detection by coupling distinguishable signal tags with catalytic recycling of DNase I

This work reports an aptamer-based, disposable, and multiplexed sensing platform for simultaneous electrochemical determination of small molecules, employing adenosine triphosphate (ATP) and cocaine as the model target analytes. The multiplexed sensing strategy is based on target-induced release of distinguishable redox tag-conjugated aptamers from a magnetic graphene platform. The electronic signal of the aptasensors could be further amplified by coupling DNase I with catalytic recycling of self-produced reactants. The assay was based on the change in the current at the various peak potentials in the presence of the corresponding signal tags. Experimental results revealed that the multiplexed electrochemical aptasensor enabled the simultaneous monitoring of ATP and cocaine in a single run with wide working ranges and low detection limits (LODs: 0.1 pM for ATP and 1.5 pM for cocaine). This concept offers promise for rapid, simple, and cost-effective analysis of biological samples.     

Metal–Organic Gel‐Derived FexOy/Nitrogen‐Doped Carbon Films for Enhanced Lithium Storage

The development of cost‐effective and flexible electrodes is demanding in the field of energy storage. Herein, flexible Fe_xO_y/nitrogen‐doped carbon films (Fe_xO_y/NC‐MOG) are prepared by facile electrospinning of Fe‐based metal–organic gels (MOGs) followed by high‐temperature carbonization. This approach allows the even mixing of fragile coordination polymers with polyacrylonitrile into flexible films while reserving the structural characteristics of coordination polymers. After thermal treatment, Fe_xO_y/NC‐MOG films possess uniformly distributed Fe_xO_y nanoparticles and larger accessible surface areas than traditional Fe_xO_y‐NC films without MOG. Taking advantage of the unique structure, Fe_xO_y/NC‐MOG exhibits a superior rate performance (449.8 mA h g^?1 at 5000 mA g^–1) and long cycle life (629.3 mA h g^–1 after 500 cycles at 1000 mA g^–1) when used as additive‐free anodes in lithium‐ion batteries.