The role of NO2 in the reduction of NO by hydrocarbon over Cu-ZrO2 and Cu-ZSM-5 catalysts

The reduction of NO _x with propene or propane in the presence of 1 or 4% O₂ was studied at low conversions over a 7.4 wt% Cu-ZrO₂ and a 3.2 wt% Cu-ZSM-5 catalyst. The rates of N₂ production were compared in experiments using only NO or a mixture of NO and NO₂ in the feed. They were also compared with the rates of NO₂ reduction to NO under the same conditions, and of NO oxidation to NO₂ in the absence of hydrocarbon. It was found that the reduction of NO₂ to NO was very fast, consistent with literature data. The data were best explained by a reaction scheme in which the hydrocarbon was activated primarily by reaction with adsorbed NO₂ to form an adsorbed oxidized N-containing hydrocarbon intermediate, the reaction of which with NO was the principal route to produce N₂ under lean NO _x conditions.On leave from State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023, PR China.     

Kinematic viscosity of biodiesel components (fatty acid alkyl esters) and related compounds at low temperatures

Biodiesel, defined as the mono-alkyl esters of vegetable oils and animal fats is, has undergone rapid development and acceptance as an alternative diesel fuel. Kinematic viscosity is one of the fuel properties specified in biodiesel standards, with 40 °C being the temperature at which this property is to be determined and ranges of acceptable kinematic viscosity given. While data on kinematic viscosity of biodiesel and related materials at higher temperatures are available in the literature, this work reports on the kinematic viscosity of biodiesel and a variety of fatty acid alkyl esters at temperatures from 40 °C down to −10 °C in increments of 5 °C using the appropriately modified standard reference method ASTM D445. Investigating the low-temperature properties of biodiesel, including viscosity, of biodiesel and its components is important because of the problems associated with the use of biodiesel under these conditions. Such data may aid in developing biodiesel fuels optimized for fatty ester composition. An index termed here the low-temperature viscosity ratio (LTVR) using data at 0 °C and 40 °C (divide viscosity value at 0 °C by viscosity value at 40 °C) was used to evaluate individual compounds but also mixtures by their low-temperature viscosity behavior. Compounds tested included a variety of saturated, monounsaturated, diunsaturated and triunsaturated fatty esters, methyl ricinoleate, in which the OH group leads to a significant increase in viscosity as well as triolein, as well as some fatty alcohols and alkanes. Esters of oleic acid have the highest viscosity of all biodiesel components that are liquids at low temperatures. The behavior of blends of biodiesel and some fatty esters with a low-sulfur diesel fuel was also investigated.     

Morphology and thermal properties of two polymethacrylates modified by a polymer liquid crystal

We have studied blends of a polymer liquid crystal (PLC) with poly(cyclohexylethyl methacrylate) (PCHEMA) or poly(cyclohexylpropyl methacrylate) (PCHPMA). The PLC is PET/0.6PHB where PET = poly(ethylene terephthalate), PHB = p-hydroxybenzoic acid and 0.6 is the mole fraction of the latter in the copolymer. The microstructure was studied by scanning electron microscopy (SEM). PCHEMA + PLC (20 wt% of the latter, blend E) has a fine texture with LC islands evenly distributed in the matrix and good adhesion between the phases resulting from their partial miscibility. The PCHPMA + PLC (20 wt% of the latter, blend P) shows only limited compatibility. The SEM results are confirmed by values of the glass transition temperatures T_g determined via thermal mechanical analysis. The T_g value of the blend E is shifted towards the T_g of PLC; T_g of blend P is practically equal to that of PCHPMA. The linear isobaric expansivity α_L values for both blends are lower than the respective values for pure PCHPMA and PCHEMA. Thermal stabilities of the blends determined by thermogravimetry are also better than those of pure polymethacrylates. The temperature of 50% weight degradation for blend E is higher than that for pure PCHEMA by more than 60 K Copyright © 2004 Society of Chemical Industry     

Professional colour communicator-the definitive colour selector

There are several systems available for the communication and selection of colours. A new system, allying precise colour differences to dye recipes, is the Professional Colour Communicator. James and Kevin Park tell us more.     

Wearable cognitive assistants in a factory setting: a critical review of a promising way of enhancing cognitive performance and well-being

Cognition, Technology & Work - Rapid technological innovations are constantly influencing the complexification and automatization of the work lines pushing human operators to use diverse...     

Cold Plasma Treatment of Soybean Oil with Hydrogen Gas

High-voltage atmospheric cold plasma (HVACP) treatment generates reactive gas species that induce inter- and intramolecular reactions in soybean oil. The goal of this study is to analyze the effect of HVACP treatment on the chemical structure of soybean oil in a hydrogen gas environment at atmospheric pressure. HVACP was used to treat soybean oil (15 g) for up to 6 hours by triplicate. Plasma-generated reactive gas species interact with the sample, producing three distinct fractions identified as a liquid, gel, and solid. Fatty acid profile, Fourier-transform infrared spectroscopy, proton and carbon nuclear magnetic resonance, size-exclusion chromatography, thermal properties, and peroxide value were used to characterize the chemical structure. Results indicated a lower content of polyunsaturated fatty acids, increased content of saturated fatty acids, and the presence of isomers. An insoluble portion was observed in the solid fraction and increased with treatment time up to 42% in the 6-h treated samples. Plasma species may cause two main reactions: polymerization and hydrogenation.     

Transparent,methacrylate-based polymer networks with controlled crosslinker ductility

A series of transparent methacrylate-based crosslinked polymer networks are prepared in which the crosslinker length is controlled as a means to investigate the effects of network ductility on mechanical and ballistic properties. In each network the optical clarity of pure poly(methyl methacrylate) (PMMA) is retained, as well as a low value of haze. Both the glass transition temperature (T_g) and the tensile modulus of the networks are highly tunable, with network values both above and well below that of pure PMMA or the pure crosslinker network. The ballistic performance is likewise affected, with performance values of up to 400% greater than neat PMMA. We examine the effects of the crosslinker molecular weight on the impact performance, finding that, in these systems, the molecular weight between crosslinks is not a driving factor for the impact performance, and this may broadly translate to polymer networks in general. We find that improvements in ballistic performance can be realized at low molecular weight between crosslinks, provided the crosslinking agent is of sufficient ductility.     

Characterization of PA-12 specimens fabricated by projection sintering at various sintering parameters

Large area projection sintering (LAPS) promises to be a new method in the field of additive manufacturing. Developed in the Mechanical Engineering Department, University of South Florida, LAPS uses long exposure times over a broad area of powder to fuse into dense, reproducible materials. In contrast, LS, a common powder-based additive manufacturing, uses a focused beam of light scanned quickly over the material. Local regions of concentrated high-energy bursts of light lead to higher peak temperatures and differing cooling dynamics and overall crystallinity. The mechanical properties of laser sintered specimens suffer because of uneven particle fusion. LAPS offers the capacity to fine-tune fusion properties through enhanced thermodynamic control of the heating and cooling profiles for sintering. Further research is required to identify the relationship between LAPS build settings and part properties to enable the fabrication of custom parts with desired properties. This study examines the influence of LAPS sintering parameters on chemical structures, crystallinity, mechanical, and thermal properties of polyamide-12 specimens using powder X-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetry, small-angle X-ray scattering, scanning electron microscopy, and microhardness testing. It was observed that higher crystallinity was imparted to specimens that were sintered for a shorter time and vice versa.     

The Pupal Parasitoid Trichopria drosophilae Is Attracted to the Same Yeast Volatiles as Its Adult Host

Journal of Chemical Ecology - There is increasing evidence that microorganisms, particularly fungi and bacteria, emit volatile compounds that mediate the foraging behaviour of insects and therefore...