Fatigue Behavior of a Pavement Foundation with Recycled Aggregate and Waste HDPE Strips

A laboratory investigation was conducted to evaluate the fatigue behavior of an alternative pavement foundation material containing cement stabilized reclaimed crushed aggregate. Class C fly ash, and waste-plastic strip [high density polyethylene (HDPE)] reinforcement. The primary motivation for this research was to evaluate a composite that contained more than 90% recycled materials for use as an alternative foundation layer underneath conventional flexible or rigid pavement. The specific objectives of this study were (1) to evaluate the flexural fatigue behavior of the new composite, and (2) to evaluate the accumulation of fatigue damage in the material. The results indicate that the fatigue resistance of this material is similar to other traditional stabilized pavement materials. It was found that the dynamic elastic modulus remained approximately constant (degraded slowly) for most specimens up to the end of fatigue life. Fatigue damage computed using a dissipated energy approach showed that the damage accumulation in this material approximately follows Miner's rule for cumulative damage, which is often used in pavement engineering.     

Analysis and Optimization of Noise in Bipolar RF Harmonic Mixers

A noise analysis of bipolar harmonic mixers (BHM) used for direct-conversion receivers is presented in this paper. Analytical and simulated results for the transfer function of the mixer are presented. Simple analytical expressions describing noise contribution from all sources are derived. Estimation of flicker noise quite agrees with harmonic-balance simulation results. Based on the derived expressions, total time average noise power spectral density (PSD) at the output is compared with simulation results. For the recommended regions of operation, error is less than 20%. The overall BHM noise figure (NF) is calculated and optimized based on a simple extracted formula. Errors introduced by analysis remain within a 1.5-dB margin with respect to simulation results. The validity of analysis for high frequencies is justified. The effect of flicker noise coefficient on the overall mixer NF is compared for different available processes.     

Quality-of-Service Based Protection in MPLS Control WDM Mesh Networks

Intelligent methods for automatic protection and restoration are critical in optical transport mesh networks. This paper discusses the problem of quality-of-service (QoS)-based protection in terms of the protection-switching time and availability for end-to-end lightpaths in a WDM mesh network. We analyze the backup lightpath-sharing problem in such networks and study the correlation of the working lightpaths and the impact of the correlation on the sharing of the backup lightpaths. We present a multi-protocol-label-switching (MPLS) control-based fully distributed algorithm to solve the protection problem. The proposed algorithm includes intelligent and automatic procedures to set up, take down, activate, restore, and manage backup lightpaths. It greatly reduces the required resources for protection by allowing the sharing of network resources by multiple backup lightpaths. At the same time, it guarantees, if possible, to satisfy the availability requirement even with resource sharing by taking the correlation of working lightpaths into consideration. A simple analysis of the proposed algorithm in terms of computation time and message complexity indicates that the implementation of the algorithm is practical. The illustrative studies that compare the performance of 1:1, unlimited sharing, and QoS-based backup sharing algorithms indicate that QoS-based sharing achieves comparable performance as unlimited sharing, which is much better than the 1:1 backup scheme in terms of connection blocking probability, average number of connections in the network for a given offered load, and network resource utilization.     

质子和中子的单粒子效应等效性实验研究

通过实验方法确定了高能质子和中子引起的单粒子效应等效关系，实验中采用金箔散射法降低了质子束流强度，并利用热释光剂量计（TLD）进行质子注量的监测，采用新研制的存储器长线实时监测系统，进行了64K位至4M位的SRAM器件单粒子效应实验，确定了两种粒子引起单粒子效应等效关系。     

Object-oriented query language access to relational databases: A semantic framework for query translation

This research investigates and approach to query processing in a multidatabase system that uses an objectoriented model to capture the semantics of other data models. The object-oriented model is used to construct a global schema, defining an integrated view of the different schemas in the environment. The model is also used as a self-describing model to build a meta-database for storing information about the global schema. A unique aspect of this work is that the object-oriented model is used to describe the different data models of the multidatabase environment, thereby extending the meta database with semantic information about the local schemas. With the global and local schemas all represented in an object-oriented form, structural mappings between the global schema and each local schema are then easily supported. An object algebra then provides a query language for expressing global queries, using the structural mappings to translate object algebra queries into SQL queries over local relational schema. The advantage of using an object algebra is that the object-oriented database can be viewed as a blackboard for temporary storage of local data and for establishing relationships between different databases. The object algebra can be used to directly retrieve temporarily-stored data from the object-oriented database or to transparently retrieve data from local sources using the translation process described in this paper.     

Accurate estimation of environment parameters from ultrasonic data

This paper describes a robust and accurate ultrasonic sensing system for a mobile robot. The system continuously updates a local map of the environment in which obstacles are represented by straight lines or points in a robot centered coordinate frame. The presented algorithms use a Kalman filter for the reduction of the noise in the ultrasonic data and use a systematical error correction (‘bundle correction’) to reduce the uncertainty in obstacle direction. Experiments are carried out in simulation and with a real mobile robot system. Results show that the accuracy with which line parameters can be estimated is in the order of 1 degree for the orientation and about 2 cm for the position. The effect of the bundle correction is significant and maximal when the robot approaches walls under a small angle.     

Influences of artificial pre-stressing on ply stresses and tensile properties of Vinylon fibre-reinforced aluminium laminates (VIRALL)

A simple micromechanical model based primarily upon the rule-of-mixtures is developed which allows prediction of the effects of fibre preload on the ply stresses (i.e., the initial residual stresses of fibre, adhesive and matrix) induced within VIRALL laminates, and the tensile stress-strain curves and mechanical properties of VIRALL laminates. The analysis of the ply stresses of VIRALL laminates indicates that pre-stressing will dramatically influence the ply stresses. The predicted tensile stress-strain curves of VIRALL laminates are in good agreement with the experimental curves and the results show that the stress-strain curves of VIRALL laminates move upwards when the prestress increases. The predicted tensile mechanical properties of VIRALL laminates at room temperature show good agreement with those obtained experimentally; both show that prestress can improve the tensile properties (i.e., elastic limit strength, 0.2% yield strength and failure strength) of VIRALL laminates.     

Cell-mediated cytotoxicity: a predictor of chronic rejection in pediatric HLA haploidentical renal transplants

BACKGROUND: Recipient antidonor cytotoxic T-cell activity has been associated with graft loss and acute rejection in renal allograft recipients. The role of immunologic mechanisms in the development of chronic graft rejection is controversial. We analyzed all living related renal transplants performed at Children's Hospital (Boston, MA) from 1983 to 1995 to assess whether cell-mediated cytotoxicity, determined in vitro and measured before transplantation, was predictive of chronic rejection. METHODS: Eighty-three patients were studied retrospectively. Fifty-seven patients with one haplotype-matched renal transplants from living related donors were studied to determine the association between cell-mediated lympholysis (CML) level, acute rejection, chronic rejection, and graft failure. Acute rejection was defined by the decision to treat. Chronic rejection was defined by histology and/or the absolute serum creatinine value using an increasing serum creatinine level >1.0 mg/dl for children less than 3, a creatinine level >1.5 mg/dl for children between 3 and 10 years of age, and a creatinine level >2.0 mg/dl for children above 10 years of age. Return to dialysis or retransplantation was considered graft failure. RESULTS: Of the 57 haploidentical patients, there were 33 males and 24 females. The mean age at transplant was 11.1 years (SD=6.7). Twelve patients developed chronic rejection, 24 patients developed acute rejection, and 7 patients had graft failure. Pretransplant cytotoxic T lymphocyte activity was associated with chronic rejection (P=0.001) and graft failure (P=0.013) but only marginally with acute rejection (P=0.058). Controlling for age and sex, Cox's proportional hazards model revealed that CML level was predictive of time to chronic rejection (P<0.01) but not acute rejection (P=0.11). It was estimated that every 1-unit increase in CML level raises the monthly risk of chronic rejection by 7%. Ten children received HLA-identical kidneys from their siblings. There were no episodes of chronic rejection after 5 years. Two patients with high CML levels had episodes of acute rejection; both patients responded to treatment. CONCLUSION: Our data demonstrate an association between pretransplant cell-mediated cytotoxicity and the occurrence of chronic rejection in living related one-haploidentical renal transplants in pediatric patients.     

An investigation of pore cracking in titanium welds

Two welded Ti-6A1-4V pressure vessels leaked prematurely in service. The leaks were caused by cracks emanating from weld porosity. The cracks originated during fabrication, with subsequent growth in service leading to the formation of the leak paths. Pore cracking is thought to be caused by a mechanism that involves both sustained-load and cyclic contributions, with the former being the more prominent. It is shown that the tendency for cracking is influenced by pore position and that pore size is not a deciding factor in that regard. The factors that govern pore cracking are discussed, and the possible role of interstitial embrittlement is assessed.