Distributed feedback laser emitting at 1.3 µm for gigabit communication systems

A distributed feedback (DFB) laser emitting at 1.3 μm for gigabit lightwave communication systems has been developed. The distributed feedback structure has been introduced in a newly developed buried heterostructure and designs for stable single-mode operation, high speed modulation, and low noise have been done. Threshold current of 10-15 mA, differential efficiency of around 0.28 mW/mA, low noise, small signal modulation bandwidth of 13.9 GHz, and satisfactory modulation waveform at 5-Gbit/s NRZ modulation have been attained with high single-mode operation yield.     

Design and performance of an angled physical contact typemultifiber connector

An angled, physical contact type multifiber connector is developed on the basis of a structural design which enables direct fiber endface contact between multifiber arrays. The direct contact is achieved by utilizing the elastic nature of a ferrule material under compressive force. The fabricated connector provides a low insertion loss of 0.2 dB and a high return loss of 58.8 dB without index-matching. This connector is used in the successful development of push-on type and backpanel type 16-fiber connectors with a low insertion loss of 0.25 dB and a high return loss of 58.0 dB for future subscriber networks     

Quadriplegia caused by cervical hyperextension injury and intramedullary spinal cord tumour: a case report of autopsy

STUDY OBJECTIVE: To determine whether an association exists between individual anesthesiologists and nonpatient care time in the operating room (OR). DESIGN: Retrospective chart review. SETTING: Cardiac surgery operating theatre in a University Hospital. PATIENTS: 312 elective coronary artery bypass procedures over 2 years. MEASUREMENTS AND MAIN RESULTS: The time interval between cases, as defined by the time between the first patient out and the second patient in, was compared. Six anesthesiologists, labelled 1 to 6, were involved in the 156 data points analyzed. The mean (+/- SD) time interval between cases, in minutes, for anesthesiologists 1 to 6 were, respectively: 24 +/- 9, 25 +/- 8, 27 +/- 8, 29 +/- 5, 30 +/- 4, 31 +/- 7. The difference among the anesthesiologists' mean time interval between cases was significant (p < 0.01). The mean time interval between cases was significantly different between anesthesiologists 1 and 6 (p < 0.01) and between anesthesiologists 2 and 6 (p < 0.05). CONCLUSION: The impact of a shorter time interval between cases on OR efficiency remains unknown. Further education and investigation of this issue are warranted.     

Stimulation of alpha4beta2 nicotinic acetylcholine receptors inhibits beta-amyloid toxicity

We describe an immunocompetent 8-year-old boy with a serological profile indicating chronic infection by Epstein-Barr virus (EBV) who developed subcutaneous and pulmonary lesions related to a peripheral T-cell proliferation. No clonal rearrangement of T-cell receptor or immunoglobulin genes was seen. However, the finding of a t(3;17)(q21;q25) in 44 metaphases from one skin lesion demonstrated a clonal origin. We also showed that the proliferative T cells contained EBV genome leading to the diagnosis of EBV-associated peripheral T-cell lymphoma. Further cytogenetic and molecular studies are needed to identify genes implicated in the pathogenesis of this haematological malignancy.     

Short-term irradiation behavior of minor actinide doped uranium plutonium mixed oxide fuels irradiated in an experimental fast reactor

A fuel irradiation program is being conducted using the experimental fast reactor ‘Joyo’. Two short-term irradiation tests in the program were completed in 2006 using a uranium and plutonium mixed oxide fuel which contains minor actinides (MA-MOX fuel). The objective of the tests is the investigation of early thermal behavior of MA-MOX fuel such as fuel restructuring and redistribution of minor actinides. Three fuel pins which contained MA-MOX: 2% neptunium and 2% americium doped uranium plutonium mixed oxide (Am,Pu,Np,U)O_2−x fuel were supplied for testing. The first test was conducted with high-linear heating rate of approximately 430 W cm⁻¹ for only 10 min. After the first test, one fuel pin was removed for examinations. Then the second test was conducted with the remaining two pins at nearly the same linear power for 24 h. In these tests, two oxygen-to-metal molar ratios were used for fuel pellets as a test parameter. Non-destructive and destructive post-irradiation examinations results are discussed with early on the behavior of the fuel during irradiation.     

Effects of conservation tillage,crop residue and cropping systems on changes in soil organic matter and maize–legume production: a case study in Teso District

The effects of conservation tillage, crop residue and cropping systems on the changes in soil organic matter (SOM) and overall maize–legume production were investigated in western Kenya. The experiment was a split-split plot design with three replicates with crop residue management as main plots, cropping systems as sub-plots and nutrient levels as sub-sub plots. Nitrogen was applied in each treatment at two rates (0 and 60 kg N ha⁻¹). Phosphorus was applied at 60 kg P/ha in all plots except two intercropped plots. Inorganic fertilizer (N and P) showed significant effects on yields with plots receiving 60 kg P ha⁻¹ + 60 kg N ha⁻¹ giving higher yields of 5.23 t ha⁻¹ compared to control plots whose yields were as low as 1.8 t ha⁻¹ during the third season. Crop residues had an additive effect on crop production, soil organic carbon and soil total nitrogen. Crop rotation gave higher yields hence an attractive option to farmers. Long-term studies are needed to show the effects of crop residue, cropping systems and nutrient input on sustainability of SOM and crop productivity.     

Computational fluid dynamics simulation and statistical procedure for estimating wide-area distributions of airborne sea salt considering local ground conditions

Steel corrosion under atmospheric conditions is a critical issue in the maintenance of structures such as electric transmission towers and bridges during their long-term operation, which are generally located at many places over a wide area. Since a major factor causing corrosion is airborne salt particles coming from the sea, wide-area distributions of the long-term cumulative amount of sea salt deposited on surfaces are needed. Moreover, since the amount of airborne sea salt varies locally with the topography, it is also important to consider the effects of topography. In this paper, a method combining a computational fluid dynamics model and a statistical procedure is proposed to efficiently estimate wide-area distributions of the cumulative amount of airborne sea salt by considering the local topography. The predicted amount of airborne sea salt decreases with increasing distance from the coast and varies with the topography and the offshore wind. A comparison between predicted and observed amounts revealed that: (1) this method appropriately estimates topographical effects on sea-salt transport and enables the estimation of deposited sea salt on structure surfaces, and (2) consideration of the trapping efficiency of sea-salt particles on structure surfaces improves the prediction accuracy.     

The lubrication mechanism in low speed plastic deformation with a synthetic lubricant — infiltration of lubricant into the boundary contact region

To investigate and evaluate the micro-pool mechanism in a mixed lubrication regime using polybutene lubricants, experiments were performed using 1 mm brass sheet, for various surface rough nesses of a work piece and die, lubricant viscosities and extrusion speeds. Systematic study showed that (1) the lower viscosity lubricant is easily squeezed out from the micro-pools into the flat are a through the troughs between the tool and work piece caused by plastic deformation of work piece, and (2) with decrease in lubricant viscosity and speed, or the larger the tool surface roughness becomes, the more lubricant infiltrates into the tool-work piece interface, which reduces the actual friction coefficient.     

Variations of stress intensity factor of a semi-elliptical surface crack subjected to mixed mode loading

Maximum stress intensity factors of a surface crack usually appear at the deepest point of the crack, or a certain point along crack front near the free surface depending on the aspect ratio of the crack. However, generally it has been difficult to obtain smooth distributions of stress intensity factors along the crack front accurately due to the effect of corner point singularity. It is known that the stress singularity at a corner point where the front of 3 D cracks intersect free surface is depend on Poisson's ratio and different from the one of ordinary crack. In this paper, a singular integral equation method is applied to calculate the stress intensity factor along crack front of a 3-D semi-elliptical surface crack in a semi-infinite body under mixed mode loading. The body force method is used to formulate the problem as a system of singular integral equations with singularities of the form r ⁻³ using the stress field induced by a force doublet in a semi-infinite body as fundamental solution. In the numerical calculation, unknown body force densities are approximated by using fundamental density functions and polynomials. The results show that the present method yields smooth variations of mixed modes stress intensity factors along the crack front accurately. Distributions of stress intensity factors are indicated in tables and figures with varying the elliptical shape and Poisson's ratio.