Verification of form tolerances part II: Cylindricity and straightness of a median line

Most inspectors measure form tolerances as the minimum zone solution, which minimizes the maximum error between the datapoints and a reference feature. Current coordinate measuring machines verification algorithms are based on the least-squares solution, which minimizes the sum of the squared errors, resulting in a possible overestimation of the form tolerance. Therefore, although coordinate measuring machines algorithms successfully reject bad parts, they may also reject some good parts. The verification algorithms developed in this set of papers compute the minimum zone solution of a set of datapoints sampled from a part. Computing the minimum zone solution is inherently a nonlinear optimization problem. This paper develops a single verification methodology that can be applied to the cylindricity and straightness of a median line problems. The final implementable formulation solves a sequence of linear programs that converge to a local optimal solution. Given adequate initial conditions, this solution will be the minimum zone solution. This methodology is also applied to the problems of computing the minimum circumscribed cylinder and the maximum inscribed cylinder. Experimental evidence that the formulations are both robust and efficient is provided.     

Nitridische und oxinitridische HPPMS‐Beschichtungen für den Einsatz in der Kunststoffverarbeitung (Teil 2)

Nitride and oxy‐nitride HPPMS coatings for the application in the plastics processing (Part 2) In the previous issue three oxy‐nitridic hard coatings on CrAl‐basis were investigated. These coatings were deposited by physical vapour deposition (PVD) as protective coatings against adhesive and abrasive wear in polymer extrusion. The coatings were developed using a variation of the oxygen content to investigate the influence of the chemical composition on the coating properties as well as composite properties between the coating and the coated tool. Following up on these findings this article will focus on the application oriented system properties of the three investigated coating systems towards the polycarbonate melt.     

Chiral Surface Lattice Resonances

Collective excitation of periodic arrays of metallic nanoparticles by coupling localized surface plasmon resonances to grazing diffraction orders leads to surface lattice resonances with narrow line width. These resonances may find numerous applications in optical sensing and information processing. Here, a new degree of freedom of surface lattice resonances is experimentally investigated by demonstrating handedness-dependent excitation of surface lattice resonances in arrays of chiral plasmonic crescents. The self-assembly of particles used as mask and modified colloidal lithography is applied to produce arrays of planar and 3D gold crescents over large areas. The excitation of surface lattice resonances as a function of the interparticle distance and the degree of order within the arrays is investigated. The chirality of the individual 3D crescents leads to the formation of chiral lattice modes, that is, surface lattice resonances that exhibit optical activity.     

Artificial Microbial Arenas: Materials for Observing and Manipulating Microbial Consortia

From the smallest ecological niche to global scale, communities of microbial life present a major factor in system regulation and stability. As long as laboratory studies remain restricted to single or few species assemblies, however, very little is known about the interaction patterns and exogenous factors controlling the dynamics of natural microbial communities. In combination with microfluidic technologies, progress in the manufacture of functional and stimuli‐responsive materials makes artificial microbial arenas accessible. As habitats for natural or multispecies synthetic consortia, they are expected to not only enable detailed investigations, but also the training and the directed evolution of microbial communities in states of balance and disturbance, or under the effects of modulated stimuli and spontaneous response triggers. Here, a perspective on how materials research will play an essential role in generating answers to the most pertinent questions of microbial engineering is presented, and the concept of adaptive microbial arenas and possibilities for their construction from particulate microniches to 3D habitats is introduced. Materials as active and tunable components at the interface of living and nonliving matter offer exciting opportunities in this field. Beyond forming the physical horizon for microbial cultivates, they will enable dedicated intervention, training, and observation of microbial consortia.     

Controlling soil water content in fertiliser dissolution experiments

Phosphorus lost in runoff from agricultural land leads to the enrichment of surface waters and contributes to algal blooms. Fertilisers are one source of this P. To compare the water available P of different fertiliser formulations in the laboratory it is necessary to control environmental conditions, temperature, relative humidity and soil water content, prior to simulating rainfall. Two chambers were designed in which relative humidity and soil water content were controlled using salt solutions. An initial design comprising a sealed chamber with three layers of soil samples over a salt bath was found to be inferior to a single layer design. The changes in water content of soil samples were used to test the single layer chamber in a constant temperature environment (15 °C) using a saturated KCl solution (90% relative humidity). Based on the final soil water content of the samples, the spatial variation within the chamber was within tolerable limits. The single layer chamber was used for a simulation experiment comparing the water available P of two commercial fertilisers. Using a saturated resorcinol solution (95% relative humidity) soil samples were equilibrated at 15 °C for 21 days, fertiliser added, and the water available P measured up to 600 h after fertiliser application. The results indicate that the amount of water available P was related to the fertiliser compound and exponentially related to the time since fertiliser application. It was concluded that the single layer chamber is suitable for controlling relative humidity and soil water content in trials such as these where the water available P of fertilisers are being compared.     

Emerging and re-emerging diseases of agricultural importance: why local perspectives matter

This paper examines local farmers’ perspectives about emerging and re-emerging infectious diseases (EIDs) of humans, crops and livestock and their impact on household food security in the Tanzania-Uganda interface ecosystem to the west of Lake Victoria. While it is increasingly accepted that such an approach could yield vital information not only regarding the extent of the impact of EIDs but also on practical strategies for their control, recent studies have examined only a narrow part of the disease-food security spectrum, often lacking a clear analysis of how local people conceptualise the co-occurrence, interactions and impact on food security of multiple plant, animal and human disease afflictions. Findings of the present study reveal that farmers perceive diseases as products of wider social, economic, environmental and institutional realities. They employ a wide range of names to describe disease problems and often such labels have nothing in common with the binomial nomenclature used in scientific taxonomy. Frequently, local people’s perceptions of severity of the impact of disease on food security are at variance with views held by experts. Consequently, disease control measures and strategies advocated by experts and policy makers are often not adhered to. This paper reveals that local or emic perspectives on diseases not only convey the sense of how local people feel and think about a particular disease but also how such knowledge shapes their response effort. Finally, the paper argues for a strategy to harness and incorporate aspects of local perspectives and practices into formal disease control programmes.     

Investigation of sodium sulfate phase transitions in a porous material using humidity- and temperature-controlled X-ray diffraction

Crystals growing in confined spaces can generate stress and are a major cause of damage in porous materials. To investigate such deleterious processes, appropriate in situ techniques are required. This paper describes the use of X-ray diffractometry under controlled conditions of temperature and relative humidity (RH-XRD) for the direct observation of phase transition reactions in a porous substrate. An improved environmental chamber without temperature gradients is presented and applied to the investigation of phase transformations in the system Na2SO4 + H2O. This salt is generally considered as particularly damaging and frequently used in accelerated weathering tests. It is demonstrated that RH-XRD can be successfully applied for the direct observation of several relevant phase transitions in glass frits used as porous substrates. The conversion of Na2SO4(III) to Na2SO4(V) and the hydration of Na2SO4(V) both proceed fairly rapidly as true solid-state reactions without deliquescence of the educt phases. In contrast, crystallization from solution is kinetically hindered as there is a strong tendency of aqueous Na2SO4 to form supersaturated solutions also in narrow pores. The important implications of this behavior of the salt are also briefly discussed in the paper.     

3D optical coherence tomography as new tool for microscopic investigations of nucleate boiling on heated surfaces

Boiling phenomena are an important aspect in security and efficiency for technical applications with high heat flux like nuclear reactors. This study presents optical coherence tomography (OCT) as a novel modality for three-dimensional and two-dimensional time resolved imaging of nucleate boiling on heated surfaces on a microscopic scale with high spatial (<10 μm) and temporal (>25 frames per second) resolution. Within this study, a borosilicate glass plate coated with an optically transparent and electrically conductive indium tin oxide (ITO) layer with a thickness of approximately 100 nm was used as heating surface. The combination of these two properties allows optical inspection of the nucleate boiling from the backside by OCT focused on the formation, growth and detachment of single bubbles. We demonstrated for the first time that OCT is an excellent tool to acquire two-dimensional and three-dimensional images of the base of vapor bubbles from the backside of the heated surface. The acquired images allow for instance the temporally resolved measurement of the bubble diameter, diameter of the bubble base and the contact angle. Exploiting the phase information of the acquired OCT signal stacks allows imaging the movement of the bubble surrounding fluid. We think that OCT will provide many new insights into the boiling phenomena at the bubble base. The recent enhancement of the acquisition rates of OCT systems will facilitate four-dimensional imaging of single bubble evaporation procedures in the nearer future.