Interactions oftrans-cinnamic acid,its related phenolic allelochemicals,and abscisic acid in seedling growth and seed germination of lettuce

Phenolic compounds have been identified as the most common allelochemicals produced by higher plants. Inhibitions of cinnamic acid, its related phenolic derivatives, and abscisic acid (ABA) on seedling growth and seed germination of lettuce were studied.trans-Cinnamic acid, ando-,m-, andp-coumaric acids inhibited the growth of etiolated seedlings of lettuce at concentrations higher than 10^–4 M and seed germination above 10^–3 M. Coumarin inhibited seedling growth and seed germination at 10^–5 M or above. Chlorogenic acid inhibited seedling growth above 10^–4 M, but did not inhibit seed germination at 10^–5–5×10^–3 M. Low concentrations (below 10^–3 M) of caffeic and ferulic acids promoted the elongation of hypocotyls, but higher concentrations (over 10^–3 M) inhibited seedling growth and seed germination. These phenolic compounds and abscisic acid had additive inhibitory effects both on seedling growth and seed germination. The inhibition on lettuce was reversed by caffeic and ferulic acids at concentrations lower than 10^–3 M except for the inhibition of germination by coumarin. These results suggest that in naturetrans-cinnamic acid,o-, m-, p-coumaric acids, coumarin, and chlorogenic acid inhibit plant growth regardless of their concentration. However, caffeic and ferulic acids can either promote or inhibit plant growth according to their concentration.     

Guinea pig bone marrow cells treated with platelet-activating factor generate factor(s) which affects their DNA synthesis and microbicidal activity

We have previously reported that platelet-activating factor (PAF) induces proliferation and microbicidal activity of guinea pig bone marrow cells. In the present study, we have found that the conditioned medium of PAF- or nonmetabolizable PAF agonist-treated guinea pig bone marrow cells augmented DNA synthesis and induced microbicial activity of bone marrow cells. A PAF specific antagonist, CV-6209, inhibited generation of the active conditioned medium by PAF. Addition of the PAF antagonist only partially suppressed the augmentative effect of the active conditioned medium on DNA synthesis; this is consistent with the fact that, because of the rapid breakdown, no appreciable amount of PAF remained in the conditioned medium of PAF-treated cells. Although mouse bone marrow cells did not respond to PAF unlike guinea pig cells, their DNA synthesis was significantly enhanced by the conditioned medium of PAF-treated guinea pig bone marrow cells. Thus, some newly generated factor(s) distinct from the originally inoculated PAF seemed to modulate the bioactions of PAF on bone marrow cells. An appreciable amount of PAF was produced by calcium ionophore-treated guinea pig bone marrow cells. These findings indicate that PAF synthesized in guinea pig bone marrow cells induces generation in the cells of some factor(s) which affects proliferation or microbicidal activity. Presented at The Third International Conference on Platelet-Activating Factor and Structurally Related Ether Lipids, Tokyo, Japan, May 1989.     

Synthesis of γ-Ga2O3–Al2O3 Solid Solutions by the Glycothermal Method

The reaction of mixtures of aluminum isopropoxide and gallium acetylacetonate in 1,4-butanediol or 1,5-pentanediol at high temperatures (glycothermal reaction) directly gave the γ-Ga₂O₃–Al₂O₃ solid solutions, which had high catalytic activities for selective reduction of NO using methane as the reducing agent. However, the reaction with a higher Al/(Ga+Al) charged ratio yielded the glycol derivative of boehmite as a by-product and the catalytic activity of the solid solution decreased. Therefore, synthesis of the solid solution using various glycols was examined and it was found that solid solutions with high Al contents without contamination of the glycol derivative of boehmite were obtained by using 1,6-hexanediol as a reaction medium. The solid solution exhibited a higher NO conversion than that synthesized in other glycols.     

Environmentally benign precipitation copolymerization of methacrylate ester and styrene to make polymeric microspheres in supercritical carbon dioxide

The polymeric microspheres were synthesized by the precipitation copolymerization of glycidyl methacrylate (GMA) with methacrylic acid(MAA) or 2‐hydoxyethyl methacrylate (2‐HEMA) containing styrene (ST) in SC‐CO₂. Scanning electron microscopy (SEM) showed that the products were spherical microparticles, with the addition of MAA and/or 2‐HEMA as the monomer, with diameter of 0.2–2 μm. The effects of copolymerization pressure, temperature, and ratios of GMA/MAA, ST, and/or GMA/2‐HEMA, on the particle size and morphology were investigated in detail. A new experiment setup is proposed for the large amount of production, based on the rule of lower monomer concentration, more stable system, and better use of the present polymerization apparatus. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2425–2431, 2007     

Depolymerization of fluoroalkyl methacrylate polymers as studied with thermogravimetry

Thermal behaviors of a few kinds of poly(fluoroalkyl methacrylate) prepared by γ-or UV-ray polymerization were investigated by using thermogravimetric measurements with the intermittent analysis of the gaseous products. The degradation of fluoroalkyl methacrylate polymers, monomeric units of which were CH₂=C(CH₃)COOCH₂(CF₂CF₂)_nH, n = 1, 2, and 3, proceeded according to the depolymerization mechanism reproducing the pristine monomer exclusively, but the thermogram in inert atmosphere showed the features of a two-step reaction. Two species of polymer differing in the heat stability were supposed to exist in the polymeric substance produced by γ- or UV-ray irradiation, and the fraction of polymer having lower heat stability increased with the increasing length of the fluoroalkyl ester group. In air, however, the thermogram of poly(fluoroalkyl methacrylate) showed no such a stepwise weight decrease as was observed in inert atomsphere with the elevating temperature, and the temperatures at which the depolymerization was introduced shifted to a much higher region. The results were ascribed to the reaction of initiating polymer radicals produced on polymer having lower stability with oxygen to form hydroperoxide, which once stabilized the polymer radicals and obstructed the initiaition of the unzipping reaction till higher temperature.     

Heat transfer to laminar flow with temperature — dependent heat generation

Two problems were solved theoretically on the heat transfer to circular tube flow with internal heat source. The one problem is to maintain the mixed-mean temperature of fluid at the inlet temperature. The other is a conjugated problem with a uniformly specified temperature at the outside surface of the wall, accounting for the wall conduction. From the numerical example for the former, it is shown that the mixed-mean temperature can be controlled within 15% error under the estimated condition. From the numerical results for the latter, it is concluded that the influence of wall conduction is more serious than the case without heat generation.     

Sedimentation equilibrium study on preferential interaction of protein with solvent components

A sedimentation equilibrium equation was derived in weight-per-volume concentration units to evaluate the degree of preferential binding of one solvent component to a homogeneous neutral macromolecule in a mixture of two components. Using the equation, the preferential binding of chloroethanol to β-lactoglobulin A was calculated from sedimentation equilibrium data, and the result showed good agreement with values obtained by light scattering and refractive index increment experiments. It was also demonstrated that the preferential interaction can in principle be determined by density increment measurements under different conditions: at constant molality and at constant chemical potential of solvent.     

Depolymerization of poly(fluoroalkyl methacrylate-co-methyl methacrylate) as studied with thermogravimetry

Thermal behaviors of a few kinds of poly(fluoroalkyl methacrylate-co-methyl methacrylate) prepared by γ-ray copolymerization were investigated by using thermogravimetric measurements together with the intermittent analysis of the gaseous products. The thermal degradation of copolymers composed of one of fluoroalkyl methacrylates of the following structures: CH₂?C(CH₃)COOCH₂(CF₂CF₂)_nH, where n = 1,2, and 3, and methyl methacrylate proceeded according to the depolymerization mechanism reproducing the pristine component comonomers exclusively, but their thermograms in inert atmosphere showed the feature of a two-step reaction. In air, however, thermograms of copolymers did not show such a stepwise decrease in weight with the elevating temperature, and temperatures at which depolymerization was introduced shifted to a much higher region. The overall aspects of depolymerization of copolymers seemed to be much similar to that of fluoroalkyl methacrylate homopolymer previously reported, and the retardation of depolymerization by air was considered to be due mainly to the stabilization of once-formed polymer radicals by oxygen.     

Transient analysis of the release and reduction of NOx using a Pt/Ba/Al2O3 catalyst

The release and reduction of NO_x in a NO_x storage-reduction (NSR) catalyst were studied with a transient reaction analysis in the millisecond range, which was made possible by the combination of pulsed injection of gases and time resolved time-of-flight mass spectrometry. After an O₂ pulse and a subsequent NO pulse were injected into a pellet of the Pt/Ba/Al₂O₃ catalyst, the time profiles of several gas products, NO, N₂, NH₃ and H₂O, were obtained as a result of the release and reduction of NO_x caused by H₂ injection. Comparing the time profiles in another analysis, which were obtained using a model catalyst consisting of a flat 5 nmPt/Ba(NO₃)₂/cordierite plate, the release and reduction of NO_x on Pt/Ba/Al₂O₃ catalyst that stored NO_x took the following two steps; in the first step NO molecules were released from Ba and in the second step the released NO was reduced into N₂ by H₂ pulse injection. When this H₂ pulse was injected in a large amount, NO was reduced to NH₃ instead of N₂.

A only small amount of H₂O was detected because of the strong affinity for alumina support. We can analyze the NO_x regeneration process to separate two steps of the NO_x release and reduction by a detailed analysis of the time profiles using a two-step reaction model. From the result of the analysis, it is found that the rate constant for NO_x release increased as temperature increase.     

Mechanical Properties of Textured Alumina Made by High-Temperature Deformation

The mechanical properties of a textured alumina made by high-temperature deformation of normal-purity sintered alumina have been investigated. The textured alumina shows very high bending strength and extremely high fracture toughness. Fracture toughness of more than 10 MPa·m^1/2 was measured by the single-edge precracked beam method, and even using the single-edge V-notched beam method, toughness of over 8 MPa·m^1/2 was obtained. This high fracture toughness was attributed to a large number of aligned small platelike grains of the textured structure enhancing the grain bridging effect.