A study of the volume and bounce decrease in hair with ageing using bending elasticity measurements

Hair diameters and bending stresses were measured for chemically untreated regions of hair close to the scalp, collected from 38 Japanese female (age range: 26–51) and 35 Caucasian female (age range: 20–40) volunteers. For the bending stress measurements, a new methodology to obtain averaged Young's modulus has been developed in which 50 fibres are measured together to give reproducible data, overcoming the individual differences in each hair fibre. By comparing the resulting data of the fibres collected from the panelists younger than 40 years of age, no significant difference in Young's modulus between Japanese and Caucasian hair was recognized, and the modulus was c. 10 GPa, regardless of the hair diameter. On the other hand, there existed cases in which fibres showed lower Young's moduli, and these fibres were from senior panelists who were conscious of the decrease in hair volume and bounce with ageing. This result indicates that the decrease in volume and bounce in hair with ageing is not only caused by a decrease in hair diameter and fewer hairs per square centimetre of scalp but also by some internal change in the hair.     

Silica removal from Mokai, New Zealand, geothermal brine by treatment with lime and a cationic precipitant

Preliminary experiments using two chemicals (CaO, a quicklime, and a cationic nitrogen-bearing precipitant, EC-004) to remove silica from geothermal brine were undertaken at the Mokai geothermal plant, New Zealand. The brine was mixed with the reagent (CaO or EC-004). The reaction was studied from the start of the experiment (NRT, 0 min, no retaining time) and after 15 min (15RT) at 90 °C. The concentration of silica in the brine was initially 954 mg/l, and decreased linearly with increasing reagent concentration. When CaO is added, the silica concentration at 15RT was 200 mg/l lower than at NRT and became almost zero on addition of 1.5 g/l. In contrast, when EC-004 is added, the total silica concentration nearly reaches the solubility of amorphous silica at 90 °C. In order to prevent silica scaling in Mokai brines cooled to 90 °C, the CaO and EC-004 added should be individually adjusted to 0.5 g/l and 80 mg/l, respectively.     

Measurements, analyses and evaluation of residential PV systems by Japanese monitoring program

This paper is about measurements, analyses and evaluation of residential PV systems in the Japanese Monitoring Program, on which JQA was subsidized by NEDO (New Energy Development and Industrial Technology Organization) that is currently proceeding [NSS R&D] from FY1997 to FY 2000.The aim of this investigation refers, through the data evaluation and analyses, to obtain knowledge required for optimizing design of PV systems, such as system performance, characteristics and regional dependency under practical operation and to develop the system evaluation technology on the design parameter method.     

Heat transfer mechanism of a swirling impinging jet in a stagnation region

Heat transfer characteristics of a swirling impinging jet have been experimentally examined using a combined particle image velocimetry (PIV) and laser‐induced fluorescence (LIF) technique for simultaneous measurement of velocity and temperature fields. The present study shows that the radial width of the jet stretches with increasing swirl intensity, and that the stretching phenomenon contributes to the maximum local heat transfer coefficient. At the stagnation region, the flow near the heated surface is mixed intermittently by reverse flows toward upstream, and spatial distributions of temperature are correlated with instantaneous velocity vector maps. The dynamic behavior of recirculation zones, attributed to swirl number Sw and impinging distance, mainly determines the turbulent heat transfer at the stagnation region. © 2003 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(8): 663–673, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10120     

Hydrogen storage properties of lithium silicon alloy synthesized by mechanical alloying

A lithium silicon alloy was synthesized by mechanical alloying method. Hydrogen storage properties of this Li-Si-H system were studied. During hydrogenation of the lithium silicon alloy, lithium atom was extracted from the alloy and lithium hydride was generated. Equilibrium hydrogen pressures for desorption and absorption reactions were measured in a temperature range from 400 to 500 °C to investigate the thermodynamic characteristics of the system, which can reversibly store 5.4 mass% hydrogen with smaller reaction enthalpy than simple metal Li. Li absorbing alloys, which have been widely studied as a negative electrode material for Li ion rechargeable batteries, can be used as hydrogen storage materials with high hydrogen capacity.     

A PHYSICAL CHEMICAL EXPLANATION FOR DETERIORATION IN THE HOT WATER PROCESSABILITY OF ATHABASCA OIL SAND DUE TO AGING

ABSTRACT

The oxidation of sulphide minerals during storage of Athabasca oil sands causes solubilization of inorganic salts which affect recovery of bitumen during hot water extraction. DLVO and Ionizable Surface Group Model theories accurately predict that the level of soluble salts produced is sufficient to cause coagulation of the fine particles during the process which leads to a deterioration in froth quality and loss of bitumen recovery. The rate of aging is specific to each oil sand but storage of oil sands under an inert atmosphere in air-tight container at sub-zero temperatures will minimize oxidation.     

CRACK PROPAGATION BEHAVIOR AND LIFETIME PREDICTION IN ALUMINA AND ZIRCONIA

The lifetime prediction of ceramics is discussed on the basis of the relationship between stress intensity factorK1 and crack velocity ν. The effects of water environment, the cyclic loading and microstructure of material on K1-ν characteristics are studied by carrying out the crack growth tests by the double torsion (DT) method under the static andcyclic loading in both environments of air and water for alumina and zirconia. K1-ν characteristics determined by the double torsion method are used to predict time-to-failure under the cyclic loading of alumina and zirconia ceramics. The predictions agree qualitatively with the experimental results.     

Inhibitory effect of high concentrations of ferric ions on the activity of Acidithiobacillus ferrooxidans

The influence of high concentrations of ferric ions on the biochemical activity of Acidithiobacillus ferrooxidans was studied using intact cells. The specific oxidation rate of ferrous ions decreased with increasing ferric ion concentration. Lineweaver-Burk plots revealed typical competitive inhibition kinetics, because the slopes varied with the ferric ion concentration. A linear relationship between the slope and the square of the ferric ion concentration revealed that the iron-oxidizing enzyme system of A. ferrooxidans was competitively inhibited by about two molecules of ferric ion. The kinetic equation based on this inhibition model agreed with the experimental observation at a high ferric ion concentration where the bacterium is usually exposed in bioleaching and biooxidation plants.     

Evaluation of cost reduction potential for 1 kW class SOFC stack production: Implications for SOFC technology scenario

Recently, a commercial version of a residential solid oxide fuel cell (SOFC) system with a flat tubular cell has been developed. However, the system cost still remains very high, which is a barrier to its widespread use. In this study, the potential for cost reductions in SOFC stack production was investigated in order to contribute to the viability of the widespread use of such residential SOFC systems in future. A cost analysis of 700 W SOFC stack production based on a process integration modeling was conducted. The present bottom–up approach enabled us to perform a sensitivity analysis with a variety of parameters in terms of cell design, the production process and cell performance. This allowed us to investigate the effects of these factors on the production cost, thereby revealing the quantitative impact of each technological improvement on the cost reduction potential. The present analysis also revealed innovation pathways which could result in technology scenarios where residential SOFC systems could reach a break-even point in comparison with the baseload electricity cost. The analysis of the cost reduction potential presented here provides a useful viewpoint for developing a research strategy for state-of-the-art SOFC technology.     

Subcooled Flow Boiling in a Minichannel

It has been considered that dry-out occurs easily in boiling heat transfer for a small channel, a mini- or microchannel, because the channel was easily filled with coalescing vapor bubbles. In the present study, the experiments of subcooled flow boiling of water were performed under atmospheric conditions for a horizontal rectangular channel for which the size is 1 mm height and 1 mm width, with a flat heating surface of 10 mm length and 1 mm width placed on the bottom of the channel. The heating surface has a top of copper heating block and is heated by ceramic heaters. In the high heat flux region of nucleate boiling, about 70–80% of the heating surface was covered with a large coalescing bubble and the boiling reached critical heat flux as observed by high-speed video. In the beginning of transition boiling, coalescing bubbles were collapsed to many fine bubbles and microbubble emission boiling was observed at liquid subcooling higher than 30 K. The maximum heat flux obtained was 8 MW/m² (800 W/cm²) at liquid subcooling of higher than 40 K and a liquid velocity of 0.5 m/s. However, the surface temperature was very much higher than that of a centimeter-scale channel. The high-speed video photographs indicated that microbubble emission boiling occurs in the deep transition boiling region.