Up-Regulation of Stearoyl-CoA Desaturase 1 Increases Liver MUFA Content in Obese Zucker but Not Goto-Kakizaki Rats

The Goto-Kakizaki (GK) rat is an animal model for spontaneous-onset, non-obese type 2 diabetes. Despite abundant evidence about disorders in metabolism, little information is available about fatty acid metabolism in the liver of GK rats. This study aimed to investigate the characteristics of the fatty acid profile, particularly MUFA, and the mechanism underlying the alterations in fatty acid profiles in the liver of GK rats. The activities of enzymes that participate in the biosynthesis of MUFA, expressions of genes encoding these enzymes, and the fatty acid profile in the liver were compared with those of obese Zucker (fa/fa) (ZF) rats, which are obese and non-diabetic. Stearoyl-CoA desaturase (SCD) activity and SCD1 gene expression were considerably up-regulated in GK rats, and these levels were largely comparable to those in ZF rats. However, the proportions and contents of oleic acid and palmitoleic acid were very low considering the highly elevated activity of SCD in the liver of GK rats, when compared with ZF rats. Palmitoyl-CoA chain elongation (PCE) activity and fatty acid elongase (Elovl6) gene expression were markedly up-regulated in ZF rats, whereas PCE activity was up-regulated much less and Elovl6 gene expression was unchanged in GK rats. These results suggest the possibility that up-regulation of gene expression of Elovl6 along with SCD1 is indispensable to elevate the proportions and contents of oleic acid in the liver.     

迈向融合的办公室设计趋势

本文根据若杉浩一先生与千代田健一先生在上海曹杨路147号艾锐斯办公家具展厅9月16日举办的“办公创新时尚研讨会”上的演讲编辑而成。若杉先生在亚太地区拥有丰富的家具及商务空间成功设计经验，深知理想的工作环境必须回归到合乎人性，他提出的“留一半让使用者参与”，“工作与生活融合”的设计体会．为办公室设计提出了新的参考。     

Cloning and analysis of the AWA1 gene of a nonfoaming mutant of a sake yeast

Almost all sake yeasts form a thick foam layer on sake mash during fermentation. To reduce the amount of foam, nonfoaming mutants were bred from foam-forming sake yeasts. To elucidate the mechanism of this foam formation, we have cloned a gene from a foam-forming sake yeast that confers foam-forming ability to a nonfoaming mutant. This gene, named AWA1, encodes a glycosylphosphatidylinositol (GPI) anchor protein that is localized to the cell wall and is required for cell surface hydrophobicity. In this paper, we describe the genomic analysis of the AWA1 gene in a nonfoaming mutant strain K701 derived from a foam-forming sake yeast strain K7. K701-AWA1 was cloned in a cosmid and its sequence was compared with that of K7-AWA1. Although the 5' half of K701-AWA1 was identical to that of K7-AWA1, the 3' half of K701-AWA1 was different from that of K7-AWA1, resulting in a loss of the C-terminal hydrophobic sequence of Awa1p. Since this sequence is considered to be required for the anchoring of Awa1p to the cell wall, K7-Awa1p could not confer both cell surface hydrophobicity and foam-forming ability to strain K701 cells. Since the change found in K701-AWA1 was not a point mutation but a larger scale event, we analyzed chromosome rearrangement by pulsed-field gel electrophoresis Southern blot analyses. The results suggest that the left subtelomeric region of chromosome IX in strain K7 was translocated to the AWA1 gene in chromosome XV by a nonreciprocal recombination.     

Deletion of MCD 4 involved in glycosylphosphatidylinositol (GPI) anchor synthesis leads to an increase in beta-1,6-glucan level and a decrease in GPI-anchored protein and mannan levels in the cell wall of Saccharomyces cerevisiae

Most proteins involved in the synthesis of the GPI core structure of Saccharomyces cerevisiae are essential for growth. To explore the relationship between the GPI anchor structure and beta-1,6-glucan synthesis, we screened deletion mutants in genes involved in GPI synthesis for osmotic remedial growth. Heterozygous diploid strains were dissected on medium with osmotic support and slow growth of the mcd 4 deletion mutant was observed. The mcd 4 mutant showed abnormal morphology and cell aggregation, and was hypersensitive to SDS, hygromycin B and K1 killer toxin. Incorporation of GPI cell wall proteins was examined using a GPI-Flo 1 fusion protein. The result suggested that the mcd 4 deletion causes a decrease in GPI cell wall proteins levels. The mutation also caused a decrease in mannan levels and an increase in alkali-insoluble beta-1,6-glucan and chitin levels in the cell wall.     

Polyepoxide-based nanohybrid films with self-assembled linear assemblies of nanodiamonds

Self-assemblies of nanodiamonds (NDs) were incorporated into polyepoxide-based composite films by electric field inducement. ND particles were dispersed by sonication in a prepolymer mixture of polyepoxide followed by high-speed mixing. The homogeneous suspension was cast onto a polyamide spacer and subjected to three different electric fields, AC, DC and switching DC, before the mixture became cross-linked. Analysis revealed that linearly aligned NDs (LANDs) were fabricated in the hybrid film, and the LANDs were aligned perpendicular to the film surface with high anisotropy. The nanohybrid films with assemblies of LANDs exhibited enhanced thermal conductivity with minimal decrease in the electrical insulation properties of the polyepoxide and are therefore attractive for application as thermal interface materials in the semiconductor industry. Mechanisms for the field-induced fabrication and structural variation of LANDs in the polymer matrix are elucidated in relation to enhancement of the physical properties.     

A Hydrogen Peroxide Activatable Gemcitabine Prodrug for the Selective Treatment of Pancreatic Ductal Adenocarcinoma

The main concern in the use of anticancer chemotherapeutic drugs is host toxicity. Patients need to interrupt or change chemotherapy due to adverse effects. In this study, we aimed to decrease adverse events with gemcitabine (GEM) in the treatment of pancreatic ductal adenocarcinoma and focused on the difference of hydrogen peroxide levels in normal versus cancer cells. We designed and synthesized a novel boronate-ester-caged prodrug that is activated by the high H₂O₂ concentrations found in cancer cells to release GEM. An H₂O₂-activatable GEM (A-GEM) has higher selectivity for H₂O₂ over other reactive oxygen species (ROS) and cytotoxic effects corresponding to the H₂O₂ concentration in vitro. A xenograft model of immunodeficient mice indicated that the effect of A-GEM was not inferior to that of GEM when administered in vivo. In particular, myelosuppression was significantly decreased following A-GEM treatment compared with that following GEM treatment.     

Potential of a direct contact adsorption heat pump system for generating steam from waste water

An adsorption heat pump with a direct contact system for steam generation has been developed and the feasibility of the proposed system was confirmed both theoretically and experimentally. The basic cycle for the system has been proposed to use zeolite–water working pairs in the p‐T‐x equilibrium curve. To generate steam above 150°C from low‐energy level water at 80°C, a direct contact adsorption heat pump prototype was constructed. The experimental results show that steam could be generated by the direct contact system and the relationship between the amount of water adsorbed and the change in temperature with time is discussed. This study is expected to serve as a foundation for developing continuous adsorption heat pump systems for steam generation. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis,kinetic study,and reaction mechanism of Li4SiO4 with CO2 in a slurry bubble column reactor

Abstract

This study was performed to investigate the synthesis, kinetic and reaction mechanism of Li₄SiO₄ with CO₂ in a slurry bubble column reactor. The Li₄SiO₄ powder sample was prepared via a solid-state reaction. The sample was characterized via X-ray diffraction (XRD) analysis and verified as a single phase. The median diameter of the sample was measured using the laser diffraction and scattering method as about 20?μm. The synthesized sample was suspended in binary molten carbonate of Li₂CO₃–K₂CO₃ having a molar ratio of 38:62. The experimental results show that Li₄SiO₄ in the slurry bubble column absorbed approximately a stoichiometric amount of CO₂. The kinetic study shows that the CO₂ reaction behavior on the Li₄SiO₄ surface was fitted to a double exponential model and the limiting step of the reaction was lithium diffusion. The mass transfer coefficient of CO₂ and rate constant of reaction with Li₄SiO₄ were studied to understand the overall absorption mechanism in the reactor. The resistance for the direct reaction of CO₂ on the Li₄SiO₄ was much smaller than the resistance for the mass transfer of CO₂ to the Li₄SiO₄. We can conclude that the direct contact of CO₂ with Li₄SiO₄ was the main path for the reaction.     

Effect of friction welding conditions on joint properties of austenitic stainless steel joints by friction stud welding

This study focuses on the opening mode of induction bends; this mode represents the deformation outside a bend. Bending experiments on induction bends are shown and the manner of failure of these bends was investigated. Ruptures occur at the intrados of the bends, which undergo tensile stress, and accompany the local reduction in wall thickness, i.e. necking that indicates strain localization. By implementing finite element analysis (FEA), it was shown that the rupture is dominated not by the fracture criterion of material but by the initiation of strain localization that is a deformation characteristic of the material. These ruptures are due to the rapid increase in local strain after the initiation of strain localization and suddenly reach the fracture criterion. For the evaluation of the deformability of the bends, a method based on FEA that can predict the displacement at the rupture is proposed. We show that the yield surface shape and the true stress–strain relationship after uniform elongation have to be defined on the basis of the actual properties of the bend material. The von Mises yield criterion, which is commonly used in cases of elastic–plastic FEA, could not predict the rupture and overestimated the deformability. In contrast, a yield surface obtained by performing tensile tests on a biaxial specimen could predict the rupture. The prediction of the rupture was accomplished by an inverse calibration method that determined the true stress–strain relationship after uniform elongation.