Phase study on solid fission products,Ba, Sr and Zr in oxide fuel

Behavior of pseudo-fission products (Ba, Sr, and Zr) as oxides in UO₂ has been investigated by means of high-temperature X-ray diffraction and microprobe analysis. Two identifiable compounds were formed as reaction products in the mixed oxides which initially consisted of UO₂, BaO, SrO, and ZrO₂ powder. These compounds were present and were identified crystallographically as (Ba, Sr) ZrO₃ and (Ba, Sr)UO₃ after heat treatment of the powders at 1500°C for 30 min. Both compounds are isostructural with perovskite, CaTiO₃, and the lattice parameters of both (Ba, Sr)ZrO₃ and (Ba, Sr)UO₃ decrease with increasing content of Sr. (Ba, Sr)UO₃ is decomposed almost completely at 1800°C while (Ba, Sr) ZrO₃ is stable up to 2000°C. The behavior of Ba, Sr, and Zr in fuel under irradiation is discussed.     

Transition of sulfospinel to Th3P4 type phase under pressure

Sulfospinels AB₂S₄ (A=Mg, Mn, B=Tm, Yb) were treated at 1000°C and 55 kbar for 1h. The X-ray powder diffractions were completely indexed by assuming that the products were isostructural with Th₃P₄. The results of density measurements showed a good agreement with those calculated from the X-ray data. No magnetic ordering was observed in temperatures down to 77K.     

Computer-aided design of a factor Xa inhibitor by using MCSS functionality maps and a CAVEAT linker search

We have investigated a new approach to efficiently find a novel inhibitor against a serine protease (i.e. an activated coagulation factor X, FXa) by using de novo design programs and the X-ray crystal structure of the target enzyme. FXa is a coagulant enzyme that generates thrombin (a serine protease) and participates in both intrinsic and extrinsic coagulation pathways. We adopted multiple copy simultaneous search (MCSS) and CAVEAT linker search techniques, which disclosed a novel FXa inhibitor (T01312) consisting of two binding moieties (the benzamidinyl and adamantyl groups) and a linker unit (the carboxybenzylamine group). The inhibitory activity of T01312 against FXa was determined to be a small K(i)-value of 48nM, which is two orders of magnitude smaller than that against thrombin. An X-ray crystal analysis of T01312 complexed with trypsin (an analogue of FXa) and docking studies of T01312 with trypsin and FXa showed that: (i) the benzamidinyl group is a predominant binding moiety in the anionic pocket (S1 site) with an asparatic acid residue; (ii) a hydrophobic pocket (S4 site) is the binding site of the adamantyl group; (iii) the carboxylate group of the linker contributes to the selectivity for FXa against thrombin. Thus, the combination of the knowledge of the X-ray crystal structure of the target molecule with MCSS and CAVEAT linker search techniques proved to be an effective hit-finding method that does not require the screening of huge compound libraries.     

The phosphorous level fine structure in homoepitaxial and polycrystalline n-type CVD diamond

The application of very sensitive photocurrent-based spectroscopic techniques have led to the detection of new levels for the electronic structure of the phosphorous donor in n-type CVD diamond. By combining quasi-steady-state photocurrent measurements (PC), photothermal ionisation spectroscopy (PTIS) and the highly sensitive Fourier transform photocurrent spectroscopy (FTPS) technique at different temperatures, ranging from liquid nitrogen temperature to 170 K, the resulting spectra point to a richer structure than assumed up to now. This is the consequence of the improved sample quality over the last years, opening up to a much larger attainable doping window. By using doping levels, ranging from 10¹⁹ cm⁻³ down to 10¹⁶ cm⁻³ on 111 -oriented Ib HPHT substrates, still giving rise to measurable n-type conductivity, spectra showed less line broadening and more fine structure. Finally, the results will be compared with spectra measured on active P-doped polycrystalline n-type films.     

Production of ozone by surface and glow discharge at cryogenictemperatures

The generation of ozone at cryogenic temperatures is investigated with a special interest in increasing the yield of ozone by using low temperatures of liquid natural gas. Two modes of plasma chemical processes are studied, both based on electric discharges: one is the high-frequency surface discharge mode under ordinary gas pressure and at a temperature above the liquid temperature of ozone at this pressure (-111°C); the other is the glow discharge mode under a low gas pressure (0.5-2.0 torr) and low gas temperature (-190°C). The surface discharge mode uses a novel ozonizer developed by the authors made of 92% high-purity alumina and tungsten electrodes sintered together. This ozonizer has an extremely high resistance to large temperature gradients and thermal shock, which is a prerequisite for cryogenic operation. The glow discharge mode uses a Pyrex glow tube with a separate liquid-ozone collector. A dramatic improvement in the energy yield of ozone generation is achieved in both modes of cryogenic operation. The results of preliminary test for cryogenic ozone generation are very encouraging     

Numerical simulation of critical current performance in Nb3Sn strand subjected to periodic bending deformation

In the ITER Engineering Design Activity (EDA), four NB₃Sn model coils were developed and successfully tested. However, it was revealed that the critical current of the conductor degraded with the increase of electromagnetic force. One of the explanations of this phenomenon is a strand bending caused by enormous electromagnetic force. The authors therefore developed a simulation code using the distributed circuit model to investigate dependency of the critical current performance on the periodic bending deformation. The simulation results were in good agreement with the experiments. The dependence of the critical current on the periodic transverse load, temperature, periodic load pitch, thickness of Ta barrier which prevents Cu stabilizer from being contaminated by Sn, twist pitch of the strand, and RRR of the bronze matrix was investigated using the developed code. The results showed that the critical current degraded less with decreasing the pitch of the transverse load and increasing the Ta barrier thickness. It suggests that the shorter cabling pitch and the larger bending stiffness prevent the critical current degradation. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(3): 7–15, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20923     

A New Laser Induced Incandescence–Mass Spectrometric Analyzer (LII-MS) for Online Measurement of Aerosol Composition Classified by Black Carbon Mixing State

We developed a laser induced incandescence–mass spectrometric analyzer (LII-MS) for online measurements quantifying the aerosol chemical compositions with respect to the mixing state of black carbon (BC). The LII-MS is developed as a tandem series comprising an LII chamber to detect and vaporize BC-containing particles and a particle trap laser desorption mass spectrometer (PT-LDMS: Takegawa et al. 2012). The PT-LDMS collects aerosol particles transferred from the LII chamber and quantifies the chemical compositions. A newly designed collection probe, coupled with the sheath-air inlet nozzle of the LII chamber, enables a high throughput of aerosol particles without significant dilution. Total aerosol particles can be analyzed in the PT-LDMS by turning off the laser (MS mode), and the aerosol particles externally mixed with BC can be analyzed by turning on the laser (LII-MS mode). The difference in the PT-LDMS signals between the MS and LII-MS modes yields the chemical composition of materials internally mixed with BC. Performance of the developed instrument was evaluated in the laboratory by generating BC particles internally-mixed with oleic acid (OL) and BC particles externally mixed with ammonium sulfate particles. Preliminary results from ambient measurements are also presented and discussed.

Copyright 2014 American Association for Aerosol Research     

About the Method of Thermoreactive Electrospark Surface Strengthening

The method of Thermoreactive Electrospark Surface Strengthening (TRESS) is presented in this work. Thus the process of coating formation becomes a less energy consuming one as compared to the basic technology of the electrospark alloying. The additional heat of the chemical reaction of the synthesis final products formation on the substrate contribute to the increase of thickness and continuity of the coating, to the diminution of the inner tension due to the smoother concentration gradients through the coating thickness. The opportunities of TRESS method are exposed with the example of the FGM wear- and heat-resistant coating formation on the base of NiAl, TiAl. FGM diamond containing coatings production by the said method is presented. Optimal conditions and technological parameters for diamond containing coatings deposition is found. The masstransfer kinetics, the coating structure and properties were studied.     

Manufacture of organic transistors on large‐area flexible substrate using direct imaging exposure system by wet process suitable for roll‐to‐roll production

Organic thin‐film transistors (OTFTs) can be fabricated via a wet process and have exceptionally high flexibility. Therefore, production using the roll‐to‐roll (RtoR) method is expected. We succeeded in developing a new OTFT wet fabrication process adaptable to the RtoR process. Utilizing the electroless plating method for wiring formation, all materials can be formed in a wet process and can be patterned using the photolithography process. In addition, we succeeded in fabricating OTFT on an A4‐type flexible substrate using RtoR direct imaging exposure system.     

Application of the acoustic emission technique to the react and wind processed Nb3Sn superconducting magnet

A technique combining acoustic emission and voltage measurement is applied to quench experiments conducted on a newly fabricated Nb₃Sn superconducting magnet. Based on the results, the training mechanism, epoxy potting effect and conductor degradation due to the electromagnetic force are discussed.