Shikonin‐loaded liposomes as a new drug delivery system: Physicochemical characterization and in vitro cytotoxicity

Alkannin and shikonin are naturally occurring hydroxynaphthoquinones with a well‐established spectrum of wound healing, antimicrobial, anti‐inflammatory, and antioxidant activities. Recently, extensive scientific effort has been focused on their effectiveness on several tumors and mechanism(s) of antitumor activity. Liposomes have been proved as adequate drug carriers offering significant advantages over conventional formulations, such as controlled release and targeted drug delivery, leading to the appearance of several liposomal formulations in the market, some of them concerning anticancer drugs. The aim of the present study was to prepare shikonin‐loaded liposomes for the first time in order to enhance shikonin therapeutic index. An optimized technique based on the thin film hydration method was developed and liposomes characterization was performed in terms of their physicochemical characteristics, drug entrapment efficiency, and release profile. Results indicated the successful incorporation of shikonin into liposomes, using both 1,2‐dipalmitoylphosphatidylcholine and egg phosphatidylcholine lipids. Liposomes presented good physicochemical characteristics, high entrapment efficiency and satisfactory in vitro release profile. In vitro cytotoxicity of liposomes was additionally tested against three human cancer cell lines (breast, glioma, and non‐small cell lung cancer) showing a moderate growth inhibitory activity. Practical applications: Shikonin is a naturally occurring hydroxynaphthoquinone and extensive scientific research (in vitro, in vivo, and clinical trials) has been conducted during the last years, focusing on its effectiveness on several tumors and mechanism(s) of antitumor action. The purpose of this work was to prepare and characterize shikonin‐loaded liposomes as a new drug delivery system for shikonin. Liposomal formulations provide significant advantages over conventional dosage forms, such as controlled release and targeted drug delivery for anticancer agents. Thus, liposomes could reduce shikonin's side effects, enhance selectivity to cancer cells and protect shikonin from internal biotransformations and instability matters (oxidization and polymerization). Furthermore, liposomal delivery helps overcome the low aqueous solubility of shikonin, which is the major barrier to its oral and internal administration, since it cannot be dissolved and further absorbed from the receptor.     

Structure and thermoelectric properties of higher manganese silicides synthesized by pack cementation

Higher manganese silicides (HMS) are promising alternative materials for middle to high temperature thermoelectric applications as a low-cost, non-toxic and highly stable p-type leg. Many of the preparation methods that have been reported previously require long-time and energy consuming processes, as well as expensive equipment, and often do not result in a material of sufficient quality. In this study, the simple, cost-effective and eco-friendly technique of pack cementation is applied. HMS powders synthesized at different experimental conditions are studied and compared considering their structure, composition, short-term thermal stability in air and thermoelectric properties. X-ray diffraction analysis, X-ray photoelectron spectroscopy, scanning electron microscopy, thermogravimetry and thermoelectric measurements (in terms of Seebeck coefficient, electrical and thermal conductivity) were employed for the characterization of the material and evaluation of its performance. All samples were identified as HMS and only some negligible traces of MnSi were detected. They moderately oxidize when heated non-isothermally under air atmosphere up to 1473 K, while the presence of HMS remains dominant even at such high temperatures. Their thermoelectric properties were remarkable for an undoped material, with a maximum figure of merit (ZT) of 0.47 at 777 K. Pack cementation appeared to have a great potential as the synthesis route of high-efficiency HMS.     

Phytoextraction technologies for mercury- and chromium-contaminated soil: a review

Mercury and chromium represent two important elements of environmental concern and with a strong impact on human health. Several technologies are available to clean up the environment from these kinds of contaminants, but most of them are costly and difficult to use to get optimum results. Currently, phytoextraction is an effective and affordable technological solution used to extract or remove metals from contaminated soil and water by the use of plants as tools. This technology is environment-friendly and potentially cost-effective. This paper aims to compile some information about the two metals mercury and chromium, their effects and their possible treatment by phytoextraction, a branch of phytoremediation technologies aimed to confront metal/metalloid pollution. © 2019 Society of Chemical Industry     

Spray Drying Performance of a Laboratory Spray Dryer for Tomato Powder Preparation

This work investigates the performance of a spray dryer for tomato powder preparation by spray drying of tomato pulp. Samples of tomato pulp with a 14% constant total solids concentration were used, and a pilot scale spray dryer (Buchi, B-191) with cocurrent operation and a two-fluid nozzle atomizer was employed for the spray drying process. Twenty-four different experiments were conducted keeping constant the feed rate, the feed temperature, and the atomizer pressure, and varying the compressed air flow rate, the flow rate of drying rate, and the air inlet temperature. In each experiment the air outlet temperature was recorded. Data for the residue remaining in the chamber and cyclone walls was gathered and two types of efficiencies were calculated as an indication of the spray dryer performance. Analysis of experimental data yielded correlations between residue accumulation and the variable operating conditions. The same operating parameters had a great influence on the air outlet temperature whereas temperature deviations were observed comparing measured air outlet temperatures with corresponding outlet adiabatic saturation temperatures.     

Upper critical solution temperature—type cononsolvency of poly(N,N-dimethylacrylamide) in water—organic solvent mixtures

The behaviour of linear poly(N,N-dimethylacrylamide) (PDMAM) chains was studied by turbidimetry and viscometry in mixtures of water with the polar organic solvents methanol, dioxane and acetone. The swelling-deswelling behaviour of PDMAM gels in the same solvent mixtures was also investigated. Contrary to the behaviour in water-methanol mixtures, in water-dioxane and water-acetone mixtures a significant shrinkage of polymer chains and deswelling of polymer gels, followed by phase separation, was observed for high organic solvent fractions. Cononsolvency phenomena were found to be temperature-dependent, as demixing occurred upon decreasing temperature. This upper critical solution temperature (UCST) phase separation behaviour in mixed solvents was studied by turbidimetry and compared to the well-known lower critical solution temperature (LCST) behaviour of poly(N-isopropylacrylamide) (PNIPAM) in similar solvents mixtures.     

Mechanical and vibration isolation behaviour of acrylonitrile-butadiene rubber/multi-walled carbon nanotube composite machine mounts

An effective analytical-experimental test method is used in the current work to characterize the vibration isolation performance of nitrile-butadiene rubber (NBR) reinforced with multi-walled carbon nanotubes (MWCNTs). A series of specimens were manufactured with 10 different NBR/MWCNTs concentrations (0 to 20wt% MWCNTs). In order to determine the static compression stiffness and hysteresis of the mounts, compression and cyclic tests were conducted. The vibration isolation properties were determined through the analysis of the transmissibility of a suitably designed test system. NBR’s mechanical properties and vibration isolation properties were improved with the addition MWCNTs, suggesting that the enhancement of NBR with MWCNTs was rather effective. Considering the obtained results, the dynamic stiffness of NBR and its capacity to isolate vibration can be adjusted by controlling the proportion of MWCNTs.     

Enhancement of Bioactive Phenols and Quality Values of Olive Oil by Recycling Olive Mill Waste Water

Mature ‘Chondrolia Chalkidikis’ olives were processed in an industrial olive oil mill equipped with a three‐phase decanter. Water was added to the decanter at a 1:2 water‐to‐paste ratio. Olive mill waste water (ΟΜWW) was used to replace the added water at a rate of 50 or 100%. Following the final separation, the obtained oil was used for chemical analysis and sensory evaluation. All oils had similar acidity, peroxide and Κ values. OMWW‐treated olive oils presented higher total phenolic content and higher antioxidant activity based on DPPH and oven tests, but lower chlorophyll and carotenoids content. However, there was no significant difference between the 50 and 100% replacement. The phenolic profile of the treated olive oils analyzed by quantitative ¹Η NMR revealed more than twofold oleocanthal and oleacein as well as oleuropein and ligstroside aglycone contents than in the control. Sensory evaluation of treated oils also showed an enhancement of fruity, bitter and pungent attributes compared to the control.     

An Advanced Centrifugal Technique to Characterize the Sticking Properties of Tomato Pulp during Drying

An advanced centrifugal technique was developed to characterize the stickiness of tomato pulp at various moisture contents and temperatures. To provide tomato pulp samples with different moisture contents, tomato powder produced by a laboratory spray dryer was wetted to six different moisture levels. By noting the rotational speed for a tomato pulp droplet detachment and weighing the mass of the droplet remaining on the surface it is possible to gauge the approximate attachment forces holding the droplet to the substrate. The effects of droplet mass and centrifugation time after reaching the desired rotor speed on the detachment rate were also studied. The detachment force was found to increase at the beginning and then started decreasing as the moisture content decreased presenting a maximum at moisture content of about 34%. In addition, the higher the droplet temperature, the higher the attachment force.     

Effect of Maltodextrin Addition during Spray Drying of Tomato Pulp in Dehumidified Air: II. Powder Properties

This work investigates the effect of maltodextrin addition on the main powder properties during spray drying of tomato pulp in dehumidified air. A pilot-scale spray dryer was employed for the spray-drying process. The modification made to the original design consisted in connecting the spray dryer inlet air intake to an absorption air dryer. 21 DE, 12 DE, and 6 DE maltodextrins were used as drying agents. Tomato pulp was spray dried at inlet air temperatures of 130, 140, and 150°C and (tomato pulp solids)/(maltodextrin solids) ratios of 4.00, 1.00, and 0.25. The tomato powders were analyzed for rheological properties, moisture content, bulk density, solubility, hygroscopicity, and degree of caking. It was found that maltodextrin addition improved powder hygroscopicity, caking, and solubility, whereas it deteriorated slightly its moisture content and density. In addition, analysis of experimental data yielded correlations between powder properties and the above-mentioned variable operating conditions. Regression analysis was used to fit a full second-order polynomial, reduced second-order polynomials, and linear models to the data of each of the properties evaluated. F values for all reduced and linear models with an R ² ≥ 0.70 were calculated to determine if the models could be used in place of full second-order polynomials.