Characterisation of Moringa stenopetala seed oil variety “Marigat” from island Kokwa

The oil from Moringa stenopetala seeds variety Marigat from the island Kokwa was extracted using 3 different procedures including cold press (CP), extraction with n‐hexane and extraction with a mixture of chloroform:methanol (1:1) (CM). The yield of oil was 35.7% (CP) to 44.9% (CM). The density, refractive index, colour, smoke point, viscosity, acidity, saponification value, iodine value, fatty acid methyl esters, sterols, tocopherols (by high‐performance liquid chromatography), peroxide value, Eequation/tex2gif-stack-1.gif at 232 nm and the susceptibility to oxidation measured by the Rancimat method were determined. The oil was found to contain high levels of unsaturated fatty acids, especially oleic (up to 76.40%). The dominant saturated acids were behenic (up to 6.01%) and palmitic (up to 6.21%). The oil was also found to contain high levels of β‐sitosterol (up to 52.19%%of total sterols), stigmasterol (up to 16.53% of total sterols) and campesterol (up to 14.26% of total sterols). α‐, β‐ and δ‐tocopherols were detected up to levels of 98.00, 44.50 and 82.41 mg/kg of oil, respectively. The reduction of the induction period (at 120 °C) of M. stenopetala seed oil ranged from 29.4% to 54.7% after degumming. The M. stenopetala seed oil showed high stability to oxidative rancidity. The results of all the above determinations were compared with those of a commercial virgin olive oil and Moringa oleifera seed oil.     

Effects of primary and quaternary amine intercalants on the organoclay dispersion in a sulfur-cured EPDM rubber

The effects of primary and quaternary amine modified montmorillonite (MMT) on the nanocomposite formation in an ethylene/propylene/diene rubber (EPDM) were studied. The organoclay was introduced in 10 parts per 100 rubber (phr) amount in the related recipes. X-ray diffraction spectra (XRD) were recorded in various stages of their processing in order to get information about the intercalation process. The curatives found to play a crucial role, as they promote the intercalation/exfoliation phenomena. Incorporation of MMT modified with octadecylamine (MMT-PRIM) in the EPDM and its more polar version (contains maleic anhydride grafted EPDM, EPDM-MA) resulted in intercalated and exfoliated structures, respectively. Deintercalation of the clay (collapse of the layers), generated in both EPDM and EPDM-MA during vulcanization, was attributed to the reactivity of the PRIM and to its ability to participate in complex formation with the curatives (vulcanization intermediates). This explanation was supported by the non-collapse of the MMT layers when the less reactive modifier, viz. octadecyltrimethylamine served as MMT intercalant (MMT-QUAT). In the latter case the corresponding nanocomposite contained mostly intercalated clay layers based on XRD and transmission electron microscopic (TEM) results.     

Structure–properties investigations in hydrophilic nanocomposites based on polyurethane/poly(2–hydroxyethyl methacrylate) semi‐interpenetrating polymer networks and nanofiller densil for biomedical application

Nanocomposites based on sequential semi–interpenetrating polymer networks (semi–IPNs) of crosslinked polyurethane and linear poly(2‐hydroxyethyl methacrylate) filled with 1–15 wt % of nanofiller densil were prepared and investigated. Nanofiller densil used in an attempt to control the microphase separation of the polymer matrix by polymer–filler interactions. The morphology (SAXS, AFM), mechanical properties (stress–strain), thermal transitions (DSC) and polymer dynamics (DRS, TSDC) of the nanocomposites were investigated. Special attention has been paid to the raising of the hydration properties and the dynamics of water molecules in the nanocomposites in the perspective of biomedical applications. Nanoparticles were found to aggregate partially for higher than 3 and 5 wt % filler loading in semi–IPNs with 17 and 37 wt % PHEMA, respectively. The results show that the good hydration properties of the semi–IPN matrix are preserved in the nanocomposites, which in combination with results of thermal and dielectric techniques revealed also the existence of polymer–polymer and polymer–filler interactions. These interactions results also in the improvement of physical and mechanical properties of the nanocomposites in compare with the neat matrix. The improvement of mechanical properties in combination with hydrophilicity and biocompatibility of nanocomposites are promising for use these materials for biomedical application namely as surgical films for wound treatment and as material for producing the medical devises. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43122.     

Complementary Effects of Carbamylated and Citrullinated LL37 in Autoimmunity and Inflammation in Systemic Lupus Erythematosus

LL37 acts as T-cell/B-cell autoantigen in Systemic lupus erythematosus (SLE) and psoriatic disease. Moreover, when bound to “self” nucleic acids, LL37 acts as “danger signal,” leading to type I interferon (IFN-I)/pro-inflammatory factors production. T-cell epitopes derived from citrullinated-LL37 act as better antigens than unmodified LL37 epitopes in SLE, at least in selected HLA-backgrounds, included the SLE-associated HLA-DRB1*1501/HLA-DRB5*0101 backgrounds. Remarkably, while “fully-citrullinated” LL37 acts as better T-cell-stimulator, it loses DNA-binding ability and the associated “adjuvant-like” properties. Since LL37 undergoes a further irreversible post-translational modification, carbamylation and antibodies to carbamylated self-proteins other than LL37 are present in SLE, here we addressed the involvement of carbamylated-LL37 in autoimmunity and inflammation in SLE. We detected carbamylated-LL37 in SLE-affected tissues. Most importantly, carbamylated-LL37-specific antibodies and CD4 T-cells circulate in SLE and both correlate with disease activity. In contrast to “fully citrullinated-LL37,” “fully carbamylated-LL37” maintains both innate and adaptive immune-cells’ stimulatory abilities: in complex with DNA, carbamylated-LL37 stimulates plasmacytoid dendritic cell IFN-α production and B-cell maturation into plasma cells. Thus, we report a further example of how different post-translational modifications of a self-antigen exert complementary effects that sustain autoimmunity and inflammation, respectively. These data also show that T/B-cell responses to carbamylated-LL37 represent novel SLE disease biomarkers.     

Implementation of a high speed frequency synthesizer employing a dual input phase accumulator

We present a new PLL based frequency synthesizer, in which we have replaced the conventional phase frequency detector and the dividers (programmable counters) with a sequential dual input phase accumulator (DIPA), consisting of a digital circuit employing adders, registers and a ladder. The main feature of the DIPA is that the two input frequencies are not required to be normalized (divided down) to the step frequency of the synthesizer. Instead, the two different high frequencies, that is the reference and the output frequency of the synthesizer, are applied directly. The DIPA samples and normalizes their phases at very high rates, calculates their phase difference, producing an output that consists of a dc component proportional to the phase difference and harmonics of the two input high frequencies. These harmonics are high frequencies and can easily be rejected by a wide bandwidth filter of the loop, without affecting the high convergence speed of the loop. Moreover, these harmonics do not generate spurs near the output frequency. The resolution of the DIPA based synthesizer depends only on the length of the digital word of the DIPA, and its convergence speed depends on the lower of the two input frequencies. The output of the DIPA is a linear function of the phase difference of the two input frequencies and its dynamic range exceeds the limit of ±2π that governs the conventional phase detectors. Thus, the proposed frequency synthesizer based on the DIPA has low phase noise, no spurs nearby the output frequency, high resolution and fast convergence rate. Additionally, the output frequency can be digitally modulated under the control of the closed loop, either by phase or frequency modulation.     

Towards Anonymous Mobile Community services

In the current market conditions, network operators are in search of novel value-added services that will increase their revenue. This paper introduces the innovative concept of Anonymous Mobile Community (AMC) services and thoroughly defines and describes a robust platform targeted for their deployment. AMC services take advantage of the terminals’ capabilities to collect information and deliver it to the network. In this context, terminals are enabled to form communities that serve as sources of information. In these communities, the anonymity and privacy of the end-users are respected and guarded. Several examples of promising AMC services are presented and categorized. An indicative example application is the provision of real-time information regarding road-traffic conditions, based on the location and speed of mobile terminals. A system aiming at the provision of diverse AMC services is proposed, and its requirements, architecture and functionality are described in detail. The related scalability issues and business models are carefully outlined, and a use case scenario as well as trial results are presented.     

Intelligent discovery of the capabilities of reconfiguration options in a cognitive wireless B3G context

Beyond 3G (B3G) wireless connectivity can efficiently be realized by exploiting cognitive networking concepts. Cognitive systems dynamically reconfigure the radio access technologies and the spectrum they use, based on experience, in order to adapt to the changing environment conditions. However, dynamic reconfiguration decisions call for robust discovery, i.e., radio-scene analysis and channel identification schemes. This paper intends to contribute in the areas of radio-scene analysis and channel identification: first, by providing an overview of interference estimation methods, and explaining how capacity estimations can be derived based on the measured interference levels; second, by specifying the information flow for the radio-scene analysis process of a cognitive radio system; and third, by enhancing the above with a learning system, which is essential for obtaining a truly cognitive process. The proposed approach lies in the introduction of a robust probabilistic model for optimal prediction of the capabilities of alternative configurations, in terms of capacity.     

A low-complexity 3-D geometric model for the description of CCI in cellular systems

In this paper, we propose a three-dimensional geometrically based stochastic model for the study of co-channel interference in cellular mobile systems. Exact analytical expressions for the statistics of the angle-of-arrival (AoA) of the interfering signals at the base station and the outage performance of a cellular network are derived. Simulated results show the merits of our proposal compared to the two-dimensional approach. The uplink AoA distribution statistics are examined in relation to cell size, antennas’ height and frequency reuse factor. Furthermore, the impact of base station antenna radiation pattern, beam tilting and cell sectorization on system performance is investigated.     

Volatile profile of Stilton cheeses: Differences between zones within a cheese and dairies

Penicillium roqueforti grows and sporulates during the ripening period of blue cheeses and it is responsible for the typical blue cheese flavour formation. However, the sporulation (blue veins) is taking place in a fraction of the total mass and the cheese matrix is highly heterogeneous. The aroma profiles regarding the three different sections of Stilton cheese, blue veins outer crust and white core, were studied using solvent extraction GC–MS, a headspace GC–MS technique (SPME GC–MS) and direct headspace analysis (APCI–MS). Cheeses from different dairies were analysed, allowing the question of how similar are different batches of cheese from different dairies.     

Theoretical and experimental investigation of pulsed laser grooving process

A theoretical model has been developed for simulating the laser grooving process. It takes into account the interaction among subsequent pulses, the required time for the melting temperature to be reached and the subsequent removal of a finite volume of material during each laser pulse. The model predicts the maximum groove depth that can be achieved for a specified set of process parameters, such as laser power, pulsing frequency, and scanning velocity. The theoretical predictions have been experimentally tested with a medium-power laser beam.