Bubble behavior in vertical tube banks installed in a fluidized bed

Fluidized bed combustion is one of the advantageous technologies for coal and/or incineration firing especially with respect to the environmental protection of emissions, such as NO_x/SO_x. Bed material movement in such a fluidized bed has a prime importance in the heat transfer process. Thus, quantitative measurement of the bed material movement and the void fraction are indispensable for better understanding of the fluidized bed. In this investigation, neutron radiography is applied to visualize the bed material movement in a simulated fluidized bed heat exchanger installed with vertical tubes. Bubble behavior and void fraction profile are obtained by the image processing technique. Bubble movement is highly restrained by these vertical tubes, so that the bubbles rise up along the tube. The bubble diameter is well correlated by the modified Mori and Wen's correlation taking into account the pitch of the tube arrangement. The bubble rise velocity and void fraction are well correlated by applying the drift‐flux model. © 2003 Wiley Periodicals, Inc. Heat Trans Asian Res, 32(8): 727–739, 2003; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10127     

黄土包气带土壤水特征曲线研究

本文主要介绍在中国辐射防护研究院野我试验场从地表到潜水ｍ深范围内４６个土芯样的水特征曲线的测量方法及测量结果。     

Polymer-electrolyte water electrolysis

The electricity for the electrolyzer is supplied by a variable electricity supply unit that simulates actual outputs of both series and parallel combinations of solar cells exposed to various solar intensities. An amorphous-silicon solar cell is used as a sensor for the unit The operation was continued for more than 600 days without trouble. The case of direct connection of the solar cell and polymer electrolyte (PE) water electrolyzer is simulated: the test results show that more than 95% of the peak electricity power of the solar battery can be utilized for the electrolyzer over various solar radiation conditions.     

Beneficial Effects of Supplementation of the Rare Sugar “D‐allulose” Against Hepatic Steatosis and Severe Obesity in Lepob/Lepob Mice

A rare sugar, D‐allulose (also called D‐psicose), has recently been applied as a food supplement in view of controlling diabetes and obesity in Japan. D‐allulose has been proven to have unique effects against hyperglycemia and hyperlipidemia in a number of studies using several species of rats and mice. However, the antiobesity effects of D‐allulose have not yet been assessed in Lep^ob/Lep^ob (ob/ob) mice. Therefore, this study explored the dietary supplemental effects of this sugar in leptin‐deficient ob/ob mice. Consequently, the subchronic ingestion of D‐allulose in ob/ob mice for 15 wk significantly decreased the body and liver weights, and the loss of body weight was involved in the reduction of the total fat mass, including abdominal visceral fat, and not fat‐free body mass, including muscle. Furthermore, D‐allulose improved hepatic steatosis, as evaluated using hepatic histological studies and MRI. In the normal mice, none of these parameters were influenced by the single or long‐term ingestion of D‐allulose. These results indicate that dietary supplementation of D‐allulose especially influences postprandial hyperglycemia and obesity‐related hepatic steatosis, without exercise therapy or dietary restriction. Therefore, D‐allulose may be useful as a supplement for preventing and improving obesity and obesity‐related disorders.     

Preparations and reactions of alkyl ethers of some aldohexoses

Aldohexose, such asd-glucose,d-galactose ord-mannose, reacted with acetone to give the following O-isopropylidene derivatives: 1,2;5,6-di-O-isopropylidene-d-glucofuranose (IA), 1,2;3,4-di-O-isopropylidene-d-galactopyranose (IB) or 2,3;5,6-di-O-isopropylidene-D-mannofuranose (IC). The O-isopropylidene derivative (IA～IC) reacted with alkyl/alkenyl halogenide to yield aldohexose ether compounds containing di-O-isopropylidene group, 3-O-alkyl-1,2;5,6-di-O-isopropylidene-d-glucofuranose (II), 6-O-alkyl-1,2;3,4-di-O-isopropylidene-d-galactopyranose (III) or 1-O-alkyl-2,3;5,6-di-O-isopropylidene-d-mannofuranoside (IV), in good yields. The Williamson ether synthesis was carried out using phase-transfer catalysis (PTC). The derived aldohexose alkyl ether containing di-O-isopropylidene group was hydrolyzed to give 3-O-alkyl-1,2-O-isopropylidene-d-glucofuranose (V) as a partial hydrolysis product; the complete hydrolysis of I～IV gave, as expected, 3-O-alkyl-glucopyranose (VI), 6-O-alkyl-galactopyranose (VII) or 1-O-alkyl-mannofuranoside (VIII). Further alkylation of (V) with Mel under PTC and subsequent acid hydrolysis gave 3-O-alkyl-5,6-di-O-methyl-d-glucofuranose (X). Methanolysis of III with catalytic amounts of H₂SO₄ gave 1-O-methyl-6-O-alkyl-d-galactofuranoside (XI). The elucidation of the galactofuranoside skeleton of (XI) was determined by means of its¹³C nuclear magnetic resonance spectra. The O-alkyl aldohexoses, e.g., X and XI, were evaluated and found to be emulsifiers.     

Model reference adaptive control system design for linear time‐varying systems with unstructured and bounded varying functions

In recent years, many methods of model reference adaptive control system (MRACS) for a linear time‐varying (LTV) plant have been proposed. These methods assumed that the structure of plant parameters is known in advance. However, it is difficult to get a priori information of plant parameters. In this paper, an MRACS design for an LTV system based on high‐order estimator (HOE) is proposed. By applying dynamic certainty equivalence (DyCE) to LTV plants, a new MRAC law of LTV system is derived without knowing the structure of the plant parameters. The MRACS law is generated by using high‐order derivatives of an estimated parameter, so that robust HOE with a normalization signal and σ modification for the system introduced. Our proposed method can attain better performance than conventional methods, such as estimation with variable forgetting factor (VF) and the gradient projection method (GPM). The robust HOE establishes the boundedness of all of the estimated parameters under the condition that the estimated parameter and the first derivative of the parameter are bounded. It is shown that all signals in the adaptive loop are bounded and the output error converges to a closed set. The proposed method is compared to the familiar schemes, the gradient projection method and the estimation based on forgetting factor through numerical simulations, and the effectiveness of our proposed method is shown. © 2000 Scripta Technica, Electr Eng Jpn, 130(4): 87–98, 2000     

Spin-Probe Investigations of Head Group Behavior in Aqueous Dispersions of a Nonionic Amphiphilic Compound

Head group behavior of nonionic amphiphilic compound, (poly(oxyethylene) hydrogenated castor oil, HCO), in aqueous dispersions were investigated by EPR (electron paramagnetic resonance) in conjunction with a modern slow-tumbling simulation. The aliphatic spin probes, 5-doxylstearic acid (5-DSA) and 3β-doxyl-5α-cholestane (CHL), were used to obtain fluidity of the surface region of the membrane. The order parameter (S ₀) using the simulation for 5-DSA and CHL in the region were approximately 0.4 and 0.2, respectively. The ordering results suggest that the head group region of the membrane is somewhat fluid. The rotational diffusion coefficients (R _⊥ ≈ 1/(6τ_R)) for the probes were 3.4 × 10⁷ and 7.1 × 10⁷ s⁻¹, respectively. Activation energies, calculated using the temperature dependence of diffusion coefficients, were 18 and 17 kJ/mol for the probes. The EPR results imply that the CHL probe in the HCO membrane has quite different behavior in comparison with that of PC (phosphatidylcholine) from egg. Thus, the present EPR analyses have provided quantitative insight into the surface region of the amphiphilic membrane.     

Structural and hydration properties of amorphous tricalcium silicate

Mechanical milling was carried out to synthesize amorphous tricalcium silicate (Ca₃SiO₅) sample, where Ca₃SiO₅ is the most principal component of Portland cement. The partial phase transformation from the crystalline to the amorphous state was observed by X-ray and neutron diffractions. Moreover, it was found that the structural distortion on the Ca-O correlation exists in the milled Ca₃SiO₅. The hydration of the milled Ca₃SiO₅ with D₂O proceeds as follows: the formation of hydration products such as Ca(OD)₂ rapidly occurs in the early hydration stage, and then proceeds slowly after about 15 h. The induction time for the hydration of the milled Ca₃SiO₅ is approximately one half shorter than that for the hydration of the unmilled one. This result means that the mechanical milling brings about the chemical activity of Ca₃SiO₅ for hydration, and may be particularly useful for increasing the reactivity in the early hydration stage.     

Ether lipids based on the glyceryl ether skeleton: Present state,future potential

Lipids from natural sources consist mainly of saponifiable substances, such as glycerides, along with some unsaponifiable lipids, some of which are ether lipids. Typical ether lipids are monoalkyl ethers of glycerin, also called alkyl/alkenyl glyceryl ethers. Alkyl/alkenyl glyceryl ethers have also been reported in marine organisms and in human feces. Several chemical syntheses of such ether lipids have been reported. Typical examples are alkyl glyceryl ether formation by the addition reaction of alkyl glycidyl ether and the telomerization reaction of butadiene with glycerin and a transition metal catalyst. Characteristic chemical structures, such as terpene alkyl glyceryl ethers, archaebacterial macrocyclic ether lipids, and glyceryl ethers of condensed cyclic planar molecules, have been obtained as well. Over the past few decades, industry has shown much interest in the chemistry and application of highly branched fatty acids. For example, isostearyl glyceryl ether (GE-IS) with methyl branching in the middle chain was already known, but it is now prepared at an industrial scale by proprietary alkyl glycidyl ether methods. The characteristic behavior of GE-IS toward water, such as formation of water-in-oil emulsions containing large amounts of water and of liquid crystals, has made it applicable for use in hair and skin-care cosmetics. Based on these studies and considerations, glyceryl ether lipids, which are rarely investigated, may become one of the most important and useful lipids in the industry.     

Current status of antihypertensive therapy for elderly patients in Japan

To assess how elderly Japanese hypertensive patients are treated by specialists, we conducted a cross-sectional survey. A total of 1,163 outpatients aged 50 years or older were studied. Hypertension was diagnosed in 939 of these patients, and 827 were receiving drug therapy. The average blood pressure during therapy was 143 +/- 16/81 +/- 10 mmHg. In patients aged 70 years or older, systolic blood pressure during antihypertensive therapy was significantly higher (p < 0.01) and diastolic blood pressure was significantly lower (p < 0.01) than the corresponding values in those aged 50 to 59 years or 60 to 69 years. The calculated mean blood pressures were similar in the different age groups. The rate of monotherapy in the patients aged 70 years or older was 58.8%, which was significantly higher (p < 0.01) than the rates of monotherapy in the other age groups. Calcium channel blockers were prescribed in about 80% of patients, irrespective of age or comorbidity. Of the patients receiving calcium channel blockers, 43.5% were treated with monotherapy. This rate significantly (p < 0.01) increased with advancing age. Diastolic blood pressures were significantly lower (p < 0.05) in patients with stroke and in those with ischemic heart disease, diabetes mellitus, or dyslipidemia, as compared with patients with no comorbidity. Among patients aged 70 years or older, the difference in systolic blood pressure between those with ischemic heart disease and those with no comorbidity was not significant. Blood pressure in elderly hypertensive patients was reduced to a level similar to that in younger patients. The target blood pressure was influenced by the presence of comorbidity. Furthermore, specialists showed a high preference for the use of calcium channel blockers in the management of hypertension.