Preparation of ceria-zeolite catalysts by different techniques and its effect on selective catalytic reduction of NO with NH3 at high space velocities

Topics in Catalysis - Several zeolite-based catalysts containing Ce3+ and/or CeO2 were prepared by a variety of catalyst preparation techniques like ion exchange, solid-state ion exchange,...     

Antioxidant efficacy of amino acids in methyl linoleate at different relative humidities

Antioxidant efficacy of the amino acids methionine, tryptophan, aspartic acid, serine, alanine and arginine in methyl linoleate were compared to a methyl linoleate control at 2,50 or 79% relative humidity (RH) at 37°C. Antioxidant efficacy varied with RH and the individual amino acids. Arginine had the highest antioxidant efficacy at all RH values compared to the control. The efficacy of alanine was equal to that of arginine at RHs of 50 and 79% but was lower at 2% RH. The presence of aliphatic, alkaline amino, hydroxyl or thiol groups in the side chain of the amino acids increased the antioxidant efficacy at high RHs.     

Pressure drop for single and two‐phase flow of non‐newtonian liquids in helical coils

New experimental results on pressure loss for the single and two‐phase gas‐liquid flow with non‐Newtonian liquids in helical coils are reported. For a constant value of the curvature ratio, the value of the helix angle of the coils is varied from 2.56° to 9.37°. For single phase flow, the effect of helix angle on pressure loss is found to be negligible in laminar flow regime but pressure loss increases with the increasing value of helix angle in turbulent flow conditions. On the other hand, for the two‐phase flow, the well‐known Lockhart‐Martinelli method correlates the present results for all values of helix angle (2.56‐9.37°) satisfactorily under turbulent/laminar and turbulent/turbulent conditions over the following ranges of variables as: 0.57 ≤ n′ ≤ 1; Re′ < 4000; Re_l < 4000; Re_g < 8000; 8 ≤ x ≤ 1000 and 0.2 ≤ De′ ≤ 1000.     

Gas-liquid mass transfer in three-phase fluidized beds with viscous pseudoplastic liquids

Liquid phase volumetric mass transfer coefficients for oxygen were determined in three-phase fluidized beds of 8 mm glass spheres fluidized by a cocurrent flow of air and pseudoplastic polysaccharide solutions (carboxymethyl cellulose, xanthan). A semi-theoretical relation for the effective shear rate was suggested. The mass transfer coefficients could be correlated, together with literature data for particle diameters of 3 mm and 5 mm in other liquids, using the terminal velocity as the particle-specific property.     

Blend membranes of chitosan and poly(vinyl alcohol) in pervaporation dehydration of isopropanol and tetrahydrofuran

Blend membranes of a natural polymer, chitosan, with a synthetic polymer, poly(vinyl alcohol) (PVA), were prepared by solution casting and crosslinked with a urea formaldehyde/sulfuric acid (UFS) mixture. Chitosan was used as the base component in the blend system, whereas PVA concentration was varied from 20 to 60 wt %. Blend compatibility was studied by differential scanning calorimetry, and Fourier transform infrared spectroscopy was used to study membrane crosslinking. Membranes were tested for pervaporation dehydration of isopropanol and tetrahydrofuran (THF) at 30°C in close proximity to their azeotropic compositions. Membrane performance was assessed by calculating flux and selectivity. Swelling experiments performed in water + organic mixtures at 30°C were used to explain the pervaporation results. The blend membrane containing 20 wt % PVA when tested for 5 and 10 wt % water–containing THF and isopropanol feeds exhibited selectivity of 4203 and 17,991, respectively. Flux increased with increasing concentration of water in the feed. Selectivity was highest for the 20 wt % PVA‐containing blend membrane. The results of this study are unique in the sense that the crosslinking agent used—the UFS mixture—was novel. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1918–1926, 2007     

Improving delamination resistance of carbon fiber reinforced polymeric composite by interface engineering using carbonaceous nanofillers through electrophoretic deposition: An assessment at different in-service temperatures

In this article, modification of carbon fiber surface by carbon based nanofillers (multi-walled carbon nanotubes [CNT], carbon nanofibers, and multi-layered graphene) has been achieved by electrophoretic deposition technique to improve its interfacial bonding with epoxy matrix, with a target to improve the mechanical performance of carbon fiber reinforced polymer composites. Flexural and short beam shear properties of the composites were studied at extreme temperature conditions; in-situ cryo, room and elevated temperature (−196, 30, and 120°C respectively). Laminate reinforced with CNT grafted carbon fibers exhibited highest delamination resistance with maximum improvement in flexural strength as well as in inter-laminar shear strength (ILSS) among all the carbon fiber reinforced epoxy (CE) composites at all in-situ temperatures. CNT modified CE composite showed increment of 9% in flexural strength and 17.43% in ILSS when compared to that of unmodified CE composite at room temperature (30°C). Thermomechanical properties were investigated using dynamic mechanical analysis. Fractography was also carried out to study different modes of failure of the composites.     

Fabrication and Characterisation of Rutile-TiO_2 Coatings on Metallic Alloy Substrates

RUTILE-TJO2is a versatile material possessing manyinteresting physical,chemical,optical and dielectricproperties[l].It is also a good tribological material thatcan offer low friction and low wear rate[2,3].However,the application of rutile in the tribological field hasbeen limited to titanium alloys only so far,for example,by thermal oxidation of titanium alloys[4,5].Very fewinvestigations have been directed to the tribologicalapplications of rutile films on substrates other thantitanium al…     

Microstructure and properties of flame sprayed tungsten carbide coatings

This article reports on feasibility experiments carried out with oxy-acetylene spray system with various oxygen to fuel ratios using two different tungsten carbide powders and powder feeding methods, to evaluate the newly developed fused WC, synthesised by transferred arc thermal plasma method. Transferred arc thermal plasma method is more economical and less energy intensive than the conventional arc method and results in a fused carbide powder with higher hardness. The microstructure and phase composition of powders and coatings were analysed by optical and scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction. Carbon content of the powders and coatings were determined to study the decarburisation of the material during spraying process. Coatings were also characterised by their hardness and abrasive wear. The effects of metallurgical transformation and phase content are related to wear performance. The results demonstrate that the powders exhibit various degree of phase transformation during the spray process depending on the type of powder, powder feeding and spray parameters. The carbon loss during the spray process in excess of 45% resulted in reduced hardness and wear resistance of the coatings. Coatings with high amount of WC and W₂C along with FeW₃C showed higher wear resistance. Thus, coatings of high wear resistance can be produced using fused tungsten carbide powder with WC and W₂C phases, which can be economically synthesised by thermal plasma transferred arc method.     

Complete relaxation and conformational exchange matrix (CORCEMA) analysis of NOESY spectra of interacting systems; two-dimensional transferred NOESY

A very general procedure entitled complete relaxation and conformational exchange matrix (CORCEMA) analysis has been developed to analyze the 2D-NOESY spectra of interacting systems undergoing multistate conformational exchange. This is an extension of earlier work from this laboratory on the methodological treatment of multistate conformational exchange [Krishna et al., Biopolymers 19, 2003 (1980)] and the theory of transferred NOESY for finite exchange off-rates [Lee and Krishna, J. Magn. Reson. 98, 36 (1992)]. The current theory is based on generalized rate matrices for relaxation and conformational exchange. The CORCEMA algorithm explicitly incorporates intermolecular dipolar cross relaxation between the molecules when they are complexed. It permits an analysis of NOESY intensities for the intra- as well as intermolecular contacts between the interacting molecules under a variety of binding conditions. Its application is illustrated on two examples of transferred NOESY simulations: (1) a two-state system involving a ligand and an enzyme forming a ligand-enzyme complex, and (2) a three-state system in which the ligand-enzyme complex can undergo a conformational transition from an "open state" to a "closed state," and can include conformational changes in both the complexed ligand and the complexed enzyme, such as hinge-bending motions. Simplifying expressions for generalized matrix analyses are derived for three limiting cases of the three-state system. This three-state example is illustrated using a hypothetical model of the hinge-bending motion in a thermolysin-inhibitor complex. It is shown that: (1) The neglect of cross relaxation between the interacting species in their complexed forms can lead to misleading conclusions on the "bound" conformation of the ligand. (2) If protein-mediated spin diffusion is dominant, caution is needed in analyses based on initial slopes alone due to one's inability to identify the exact range of the initial growth curve under poor signal/noise situations. (3) The neglect of conformational changes upon complexation, e.g., hinge-bending motions of the ligand-enzyme complex, can lead to erroneous results on the nature of "bound" conformations of the ligand. In this case, attempts to analyze the transferred NOESY data with a two-state model will result in a "virtual" conformation for the bound ligand. (4) When the hinge-bending rate is slower than the cross relaxation and enzyme off-rates, the bound conformation of a ligand deduced from the transferred NOESY experiment is more likely to represent nonspecific or weak binding in an open state of the enzyme.(ABSTRACT TRUNCATED AT 400 WORDS)