Electron transport through alkanethiolate films decorated with monolayer protected gold clusters

Monolayers of 1,9-nonanedithiol or 1-decanethiol self-assembled directly on the gold substrate transfer charge to the K₄[Fe(CN)₆] molecule in solution more efficiently when they are decorated with 1-butanethiol protected gold nanoclusters. The clusters bound to the electrode by means of dithiol are more uniformly distributed on the monolayer and their efficiency in transferring electrons between the electrode and the redox couple is higher than when they are simply adsorbed through weak van der Waals interactions with the methyl groups of 1-decanethiol. With increasing adsorption time in the solution of clusters, the capacitance of the cluster decorated electrode significantly increases compared to the constant value of capacitance observed after prolonged immersion in pure toluene. This difference is explained assuming that gold clusters act as an array of capacitors on the monolayer modified electrode surface.     

Three‐Dimensional Internal Order in Multiwalled Carbon Nanotubes Grown by Chemical Vapor Deposition (Adv. Mater. 6/2005)

Unprecedented levels of internal order are obtained in multiwalled carbon nanotubes grown by chemical vapor deposition with a nitrogen‐doping level of 3% in work reported by Windle and co‐workers on p. 760. Not only is each of the tubular layers of the same orientation (chirality), but they also appear to be in three‐dimensional crystallographic register with one another as shown by the hkl reflections on the cover. The tubes are also straighter and thicker than pure carbon equivalents. The layers are either pure zigzag or pure armchair with spacings close to that of graphite.     

Formulation of Presliding Domain Non-local Memory Hysteretic Loops Based Upon Modified Maxwell Slip Model

In this paper, we investigate formulation of non-local memory effect hysteretic loops in presliding domain of friction by examining the dynamic responses of a single-degree-of-freedom friction oscillator. We modify the Maxwell slip model introducing characteristic features of asperities and perform detailed examination of the system from two perspectives. The first one, termed by us as microscale, presents contribution of each individual asperity to the total friction force, whereas the second one, termed by us as macroscale, concerns friction force behaviour of the whole model treated as the unity, with a special emphasis on non-local memory effect hysteretic loops formulation, complemented by time responses.     

Wireless link prediction and triggering using modified Ornstein–Uhlenbeck jump diffusion process

Through time domain observation, typical wireless signal strength values seems to exhibit some forms of mean-reverting and discontinuous “jumps” behaviour. Motivated by this fact, we propose a wireless link prediction and triggering (LPT) technique using a modified mean-reverting Ornstein–Uhlenbeck (OU) jump diffusion process. The proposed technique which we refer as OU-LPT is an integral component of wireless mesh network monitoring system developed by ICT FP7 CARrier grade wireless MEsh Network project. In particular, we demonstrate how this technique can be applied in the context of wireless mesh networks to support link switching or handover in the event of predicted link degradation or failure. The proposed technique has also been implemented and evaluated in a real-time experimental testbed. The results show that OU-LPT technique can significantly enhance the reliability of wireless links by reducing the rate of false triggers compared to a conventional linear prediction technique and therefore offers a new direction on how wireless link prediction, triggering and switching process can be conducted in the future.     

Analysis of polymer foil heaters as infrared radiation sources

Infrared radiation as a heat source is used in many fields. In particular, the positive effect of far-infrared radiation on living organisms has been observed. This paper presents two technological solutions for infrared heater production using polymer-silver and polymer-carbon pastes screenprinted on foil substrates. The purpose of this work was the identification of polymer layers as a specific frequency range IR radiation sources. The characterization of the heaters was determined mainly by measurement of the surface temperature distribution using a thermovision camera and the spectral characteristics were determined using a special measuring system. Basic parameters obtained for both, polymer silver and polymer carbon heaters were similar and were as follows: power rating of 10–12 W/dm², continuous working surface temperature of 80–90 °C, temperature coefficient of resistance (TCR) about +900 ppm/K for polymer-carbon heater and about +2000 ppm/K for polymer-silver, maximum radiation intensity in the wavelength range of 6–14 μm with top intensity at 8.5 μm and heating time about 20 min. For comparison purposes, commercial panel heater was tested. The results show that the characteristics of infrared polymer heaters are similar to the characteristics of the commercial heater, so they can be taken into consideration as the alternative infrared radiation sources.     

Investigation of the Equivalence of National Dew-Point Temperature Realizations in the ?50?°C to +?20?°C Range

In the field of humidity quantities, the first CIPM key comparison, CCT-K6 is at its end. The corresponding European regional key comparison, EUROMET.T-K6, was completed in early 2008, about 4?years after the starting initial measurements in the project. In total, 24 NMIs from different countries took part in the comparison. This number includes 22 EURAMET countries, and Russia and South Africa. The comparison covered the dew-point temperature range from ?50?°C to +20?°C. It was carried out in three parallel loops, each with two chilled mirror hygrometers as transfer standards in each loop. The comparison scheme was designed to ensure high quality results with evenly spread workload for the participants. It is shown that the standard uncertainty due to the long-term instability was smaller than 0.008?°C in all loops. The standard uncertainties due to links between the loops were found to be smaller than 0.025?°C at ?50?°C and 0.010?°C elsewhere. Conclusions on the equivalence of the dew-point temperature standards are drawn on the basis of calculated bilateral degrees of equivalence and deviations from the EURAMET comparison reference values (ERV). Taking into account 16 different primary dew-point realizations and 8 secondary realizations, the results demonstrate the equivalence of a large number of laboratories at an uncertainty level that is better than achieved in other multilateral comparisons so far in the humidity field.     

Conversion efficiency of glucose/xylose mixtures for ethanol production using Saccharomyces cerevisiae ITV01 and Pichia stipitis NRRL Y‐7124

BACKGROUND: Efficient conversion of glucose/xylose mixtures from lignocellulose is necessary for commercially viable ethanol production. Oxygen and carbon sources are of paramount importance for ethanol yield. The aim of this work was to evaluate different glucose/xylose mixtures for ethanol production using S. cerevisiae ITV‐01 (wild type yeast) and P. stipitis NRRL Y‐7124 and the effect of supplying oxygen in separate and co‐culture processes. RESULTS: The complete conversion of a glucose/xylose mixture (75/30 g L^?1) was obtained using P. stipitis NRRL Y‐7124 under aerobic conditions (0.6 vvm), the highest yield production being Y_p/s = 0.46 g g^?1, volumetric ethanol productivity Q_pmax = 0.24 g L^?1 h^?1 and maximum ethanol concentration P_max = 34.5 g L^?1. In the co‐culture process and under aerobic conditions, incomplete conversion of glucose/xylose mixture was observed (20.4% residual xylose), with a maximum ethanol production of 30.3 g L^?1, ethanol yield of 0.4 g g^?1 and Q_pmax = 1.26 g L^?1 h^?1. CONCLUSIONS: The oxygen present in the glucose/xylose mixture promotes complete sugar consumption by P. stipitis NRRL Y‐7124 resulting in ethanol production. However, in co‐culture with S. cerevisiae ITV‐01 under aerobic conditions, incomplete fermentation occurs that could be caused by oxygen limitation and ethanol inhibition by P. stipitis NRRL Y‐7124; nevertheless the volumetric ethanol productivity increases fivefold compared with separate culture. Copyright © 2011 Society of Chemical Industry     

Radiation- and Photo-Induced Oxidation Pathways of Methionine in Model Peptide Backbone under Anoxic Conditions

Within the reactive oxygen species (ROS) generated by cellular metabolisms, hydroxyl radicals (HO^•) play an important role, being the most aggressive towards biomolecules. The reactions of HO^• with methionine residues (Met) in peptides and proteins have been intensively studied, but some fundamental aspects remain unsolved. In the present study we examined the biomimetic model made of Ac-Met-OMe, as the simplest model peptide backbone, and of HO^• generated by ionizing radiation in aqueous solutions under anoxic conditions. We performed the identification and quantification of transient species by pulse radiolysis and of final products by LC-MS and high-resolution MS/MS after γ-radiolysis. By parallel photochemical experiments, using 3-carboxybenzophenone (CB) triplet with the model peptide, we compared the outcomes in terms of short-lived intermediates and stable product identification. The result is a detailed mechanistic scheme of Met oxidation by HO^•, and by CB triplets allowed for assigning transient species to the pathways of products formation.