Effect of gravity on InGaSb crystal growth

The effect of gravity on dissolution of GaSb in InSb melt and growth of InGaSb was experimentally investigated. Experiments were carried out in a GaSb(seed)/InSb/GaSb(feed) sandwich system under an imposed temperature gradient. In the experiments, the GaSb feed crystal dissolved into the InSb melt to supply the required GaSb component for the growth of In_0.1Ga_0.9Sb crystal. Two parameters were considered: (1) the inclination angle (θ) of the sample for gravity as 0° and 53°, and (2) the sample diameter (D) as 9 mm and 5mm. When θ was 0°, the interface was almost flat, indicating that convection was axisymmetric and stable. Whereas the interface was distorted towards gravitational direction when θ was 53°, indicating that solutal convection was dominant. The decrease of growth temperature and sample diameter reduced the distortion of interface and the dissolution amount of GaSb feed. The homogeneous crystals were grown at the initial growth stage by supplying the GaSb component during growth.     

Applications of Thermoelectric Power Measurement to Deterioration Diagnosis of Nuclear Material and Its Principle

In order to non-destructively evaluate changes in toughness of cast duplex stainless steel, which is frequently used in main coolant pipes of PWR type nuclear power plants, due to thermal aging, we tried to apply thermoelectric power (TEP) measurement. because TEP is sensitive to microstructural material changes, and to clarify the mechanism behind TEP changes due to thermal aging. As a result, TEP of cast duplex stainless steel increased with aging time, and good correlations were found between TEP and toughness. Concerning the mechanism, TEP of high and low Cr content alloys was higher than that of intermediate Cr content alloys. Because high and low Cr areas are created in the ferrite phase due to thermal aging. TEP of the entire material increased. Furthermore, when each Cr fluctuating area acted in parallel, the increase in TEP became larger. According to the Mott-Jones theory, TEP is largely related to the electron density of states at the Fermi level. The electron density of states of Fe–Cr–Ni alloys in the valence band was measured with X-ray photoelectron spectroscopy (XPS). As a result, there was a high correlation between the TEP calculated from the XPS spectrum and the measured TEP. Therefore, we showed experimentally that the electron density of states changed due to variations in Cr concentration, which also affect TEP.     

Multi-objective genetic algorithm for solving N-version program design problem

N-version programming (NVP) is a programming approach for constructing fault tolerant software systems. Generally, an optimization model utilized in NVP selects the optimal set of versions for each module to maximize the system reliability and to constrain the total cost to remain within a given budget. In such a model, while the number of versions included in the obtained solution is generally reduced, the budget restriction may be so rigid that it may fail to find the optimal solution. In order to ameliorate this problem, this paper proposes a novel bi-objective optimization model that maximizes the system reliability and minimizes the system total cost for designing N-version software systems. When solving multi-objective optimization problem, it is crucial to find Pareto solutions. It is, however, not easy to obtain them. In this paper, we propose a novel bi-objective optimization model that obtains many Pareto solutions efficiently.We formulate the optimal design problem of NVP as a bi-objective 0–1 nonlinear integer programming problem. In order to overcome this problem, we propose a Multi-objective genetic algorithm (MOGA), which is a powerful, though time-consuming, method to solve multi-objective optimization problems. When implementing genetic algorithm (GA), the use of an appropriate genetic representation scheme is one of the most important issues to obtain good performance. We employ random-key representation in our MOGA to find many Pareto solutions spaced as evenly as possible along the Pareto frontier. To pursue improve further performance, we introduce elitism, the Pareto-insertion and the Pareto-deletion operations based on distance between Pareto solutions in the selection process.The proposed MOGA obtains many Pareto solutions along the Pareto frontier evenly. The user of the MOGA can select the best compromise solution among the candidates by controlling the balance between the system reliability and the total cost.     

Psychological Stress Exacerbates Inflammation of the Ileum via the Corticotropin-Releasing Hormone-Mast Cell Axis in a Mouse Model of Eosinophilic Enteritis

The effects of psychological stress on eosinophilic gastrointestinal disorders have not been elucidated. This study investigated the effects of psychological stress in a mouse model of eosinophilic enteritis (EoN). BALB/c mice were treated with ovalbumin (OVA) to create an EoN model and subjected to either water avoidance stress (WAS) or sham stress (SS). Microscopic inflammation, eosinophil and mast cell counts, mRNA expression, and protein levels of type 2 helper T cell (Th2) cytokines in the ileum were compared between groups. We evaluated ex vivo intestinal permeability using an Ussing chamber. A corticotropin-releasing hormone type 1 receptor (CRH-R1) antagonist was administered before WAS, and its effects were analyzed. WAS significantly increased diarrhea occurrence and, eosinophil and mast cell counts, and decreased the villus/crypt ratio compared to those in the SS group. The mRNA expression of CRH, interleukin IL-4, IL-5, IL-13, eotaxin-1, and mast cell tryptase β2 significantly increased, and the protein levels of IL-5, IL-13, and OVA-specific immunoglobulin E (IgE) also significantly increased in the WAS group. Moreover, WAS significantly increased the intestinal permeability. The CRH-R1 antagonist significantly inhibited all changes induced by WAS. Psychological stress exacerbated ileal inflammation via the CRH-mast cell axis in an EoN mouse model.     

栏栅式山溪取水工程取水特性的试验研究

通过水工模型试验,对栏栅式山溪取水工程的取水特性进行了研究,探讨了在有足够大的集水廊道的前提下,该取水工程的潜在取水能力。结果表明,在影响栏栅取水量的诸因素中,栅条长度、栅隙和栏栅的设置角度对取水量的影响程度不同;其取水量主要由栏栅的设置角度决定,而栅条长度和栅隙对取水量的影响程度较小;栏栅的设置角度小于50°时,栏栅有较大的引水比,栏栅的设置角度大于50°后,栏栅的引水比大幅度下降。     

Nanopillar array chip integrated with on-line stacking for fast DNA separation with high sensitivity and high resolution

Recent developments of nanofabrication techniques have created a trend switching from randomly ordered polymeric matrices, such as gel, to highly ordered sieving nanostructures in the separation of biomolecules. These nanostructures have enormous potential for fast separation of biomolecules, while nanostructure-based separation techniques suffer from critical scaling problems; they are efficient in handling less than nanoliter amounts of sample fluids, but most biomolecule samples are available in a liquid volume that is over several microliter, leading to a reduction in sensitivity and resolution. In this study, we developed a nanopillar array chip integrated with an easy and rapid on-line stacking method and achieved fast DNA separation with high sensitivity and high resolution. The developed on-line stacking method is based on the balance of two forces driven by electric fields: electroosmotic flow (EOF) and electrophoresis. The EOF mobility from the microchannel to the nanopillar-channel is drastically decreased, while, on the other hand, electrophoresis has constant mobilities in the whole length of the channels. The on-line stacking was realized at the well-balanced position of the two forces, and the on-line stacking using the nanopillar array chip can also be achieved within 10 s by just applying electric voltages without any other special reagents and materials. After applying on-line stacking using the nanopillar array chip, the relative fluorescence intensity increased 1,000-fold, and the resolution was twice as good as that without on-line stacking.     

Simulated crepitus and its reality-based specification using wearable patient dummy

Physical therapists are trained in manual examination techniques to test the impaired motor functions of patients. In this study, we have introduced a wearable robotic dummy joint to simulate disordered joint resistances or behaviors to support physical therapists in learning such techniques. We developed a discontinuous joint friction model based on a stick-slip phenomenon to simulate knee joint resistances caused by crepitus, a typical symptom accompanied by osteoarthritis. Practicing therapists participated in a reality-based evaluation test and specified acceptable parameter sets to adjust the simulated crepitus for the exoskeletal patient robot. The simulated crepitus and wearable dummy joint are expected to support the training of physical therapists.     

Probabilistic enhancement of approximate indexing in metric spaces

Some approximate indexing schemes have been recently proposed in metric spaces which sort the objects in the database according to pseudo-scores. It is known that (1) some of them provide a very good trade-off between response time and accuracy, and (2) probability-based pseudo-scores can provide an optimal trade-off in range queries if the probabilities are correctly estimated. Based on these facts, we propose a probabilistic enhancement scheme which can be applied to any pseudo-score based scheme. Our scheme computes probability-based pseudo-scores using pseudo-scores obtained from a pseudo-score based scheme. In order to estimate the probability-based pseudo-scores, we use the object-specific parameters in logistic regression and learn the parameters using MAP (Maximum a Posteriori) estimation and the empirical Bayes method. We also propose a technique which speeds up learning the parameters using pseudo-scores. We applied our scheme to the two state-of-the-art schemes: the standard pivot-based scheme and the permutation-based scheme, and evaluated them using various kinds of datasets from the Metric Space Library. The results showed that our scheme outperformed the conventional schemes, with regard to both the number of distance computations and the CPU time, in all the datasets.     

Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

Complete erasing of ghost images on computed radiography plates and role of deeply trapped electrons

Computed radiography (CR) plates made of europium-doped Ba(Sr)FBr(I) were simultaneously exposed to filtered ultraviolet light and visible light in order to erase ghost images, i.e., latent image that is unerasable with visible light (LIunVL) and reappearing one, which are particularly observed in plates irradiated with a high dose and/or cumulatively over-irradiated. CR samples showing LIunVLs were prepared by irradiating three different types of CR plates (Agfa ADC MD10, Kodak Directview Mammo EHRM2, and Fuji ST-VI) with 50 kV X-ray beams in the dose range 8.1 mGy—8.0 Gy. After the sixth round of simultaneous 6 h exposures to filtered ultraviolet light and visible light, all the LIunVLs in the three types of CR plates were erased to the same level as in an unirradiated plate and no latent images reappeared after storage at 0 °C for 14 days. With conventional exposure to visible light, LIunVLs consistently remained in all types of CR plates irradiated with higher doses of X-rays and latent images reappeared in the Agfa M10 plates after storage at 0 °C. Electrons trapped in deep centers cause LIunVLs and they can be erased by simultaneous exposures to filtered ultraviolet light and visible light. To study electrons in deep centers, the absorption spectra were examined in all types of irradiated CR plates by using polychromatic ultraviolet light from a deep-ultraviolet lamp. It was found that deep centers showed a dominant peak in the absorption spectra at around 324 nm for the Agfa M10 and Kodak EHRM2 plates, and at around 320 nm for the Fuji ST-VI plate, in each case followed by a few small peaks. The peak heights were dose-dependent for all types of CR samples, suggesting that the number of electrons trapped in deep centers increases with the irradiation dose.