The Difficulties of Designing Future Coastlines in the Face of Climate Change

This paper adopts two perspectives. The first is a framing process aimed at defining and examining the conditions for adopting adaptive coastal governance. The second applies to relevant themes of changing coastal policy, central to the testing of adaptive coastal governance, namely cooperative science, risk-sensitive planning, socially fair insurance cover and effective ways to design, finance and engage with local communities over actual coastal change. We illuminate both missions through case studies in North Norfolk (England) and Portugal, all notably affected by coastal change. In England and Portugal, there is a broad understanding and acceptance of the likely effects of climate change. This recognition encourages debates over risk-averse planning, the design of proactive insurance cover, creative relocation of endangered property and new ways of predicting and paying for coastal adjustment. Yet, moving from a basic willingness to engage with coastal change to actual practices of landscape adjustment through such policy shifts is proving very difficult. In this research, we find that coastal landscapes are lived experiences, resigned acceptances of inevitable change and hopeful imaginings. Coastal management institutions are not geared to resolving this incompatibility and this paper explains why.     

Towards occupant-centric simulation-aided building design: a case study

ABSTRACT

This paper aims at illustrating the importance of occupant modelling for decision-making during the building design process. It identifies the energy implications of conventional ways of modelling occupants for the design of office buildings. Furthermore, it presents a step towards bridging the gap between the research efforts and conventional practices within the field of building performance simulation (BPS) aided design. The paper first describes occupant-related assumptions that were made during the design process of a case study office building, obtained via stakeholder interviews. Then, the impact of these assumptions on the design decisions is examined through a simulation-based investigation. The stakeholder interviews revealed that professionals from each design discipline made significantly different assumptions about occupants. The simulation results showed that assumptions about occupants and their behaviour impacted predicted energy savings of some design decisions by a factor of five or more.     

Estimation of soil properties of shallow landslide source areas by dynamic penetration tests: first outcomes from Northern Tuscany (Italy)

In Northern Tuscany (Italy) rapid, shallow landslides often cause casualties and severe damage. Aimed at contributing to the characterisation of the source areas of rapid, shallow landslides, this paper deals with the geotechnical parameterisation of the mainly involved soil by means of dynamic penetration tests. The source areas are usually located in difficult access sites, where boring and undisturbed sampling are very hard and onerous. Therefore, the results of 177 dynamic penetration tests were analysed, including dynamic probing (DP) tests and standard penetration tests (SPT). The results of these tests were related to relative density D _r and friction angle Φ′ of the soil by means of empirical equations. The distribution and variability of these parameters were analysed and related to soil type, test type and probing depth. The D _r and Φ′ values coming from the DP and SPT tests were found to be comparable. The Φ′ values coming from DP tests and direct shear tests showed an acceptable correlation, confirming the utility of the DP tests. The DP test can thus be an effective tool in the estimation of the properties of potentially unstable soil slope covers.     

Pseudo stir bar sorptive microextraction fiber using nanoparticles reinforcedsol–gel for the determination of Co(II) and Cd(II) ions in wastewaters

In this work a newly semi polar extraction phase of carboxylated multiwalled carbon nanotube (MWCNTs) reinforced sol-gel immobilized polypropylene hollow fiber was prepared by low temperature hydrothermal process. It is coupled with flame atomic absorption spectroscopy was employed in the extraction and determination of cobalt and cadmium ions in wastewaters. The main factors influencing the pre-concentration and extraction of the metal ions have been examined in detail. Detection limits obtained in this way for Co(II) and Cd(II) ions were 0.0186 and 0.024 ng mL^?1, respectively.     

Maternal Flaxseed Oil During Lactation Enhances Bone Development in Male Rat Pups

Flaxseed oil is an alpha linolenic acid source important in the growth and body development stage; furthermore, this acid acts on adipose tissue and bone health. The aim of this study was to evaluate body composition, fatty acid composition, hormone profile, retroperitoneal adipocyte area and femur structure of pups at weaning, whose mothers were fed a diet containing flaxseed oil during lactation. After birth, pups were randomly assigned: control (C, n = 12) and flaxseed oil (FO, n = 12), rats whose mothers were treated with diet containing soybean or flaxseed oil. At 21 days, the pups were weaned and body mass, length, body composition, biochemical parameter, leptin, osteoprotegerin, osteocalcin, fatty acids composition, intra‐abdominal fat mass and femur structure were analyzed. FO showed (p < 0.05): higher body mass (+12 %) and length (+9 %); body fat mass (g, +45 %); bone mineral density (+8 %), bone mineral content (+55 %) and bone area (+35 %), osteocalcin (+173 %) and osteoprotegerin (+183 %). Arachidonic acid was lower (p < 0.0001), alpha‐linolenic and eicosapentaenoic were higher (p < 0.0001). Intra‐abdominal fat mass was higher (+25 %), however, the retroperitoneal adipocytes area was lower (?44 %). Femur mass (+10 %), distance between epiphyses (+4 %) and bone mineral density (+13 %) were higher. The study demonstrates that adequate flaxseed oil content during a lactation diet plays an important role in the development of pups.     

Biocatalytic conversion of kraft pulp using cellulase complex of <Emphasis Type="Italic">Penicillium verruculosum</Emphasis>

The efficiency of biocatalysts based on the cellulase complex from the Penicillium verruculosum fungus in the hydrolysis of kraft pulp from soft and hardwood is investigated. The activities of biocatalysts with respect to unbleached and bleached cellulose samples and the dependence of the degree of cellulose conversion on the content of noncellulose components are determined. It is shown that wet kraft pulp exhibits high reactivity in enzymatic hydrolysis with cellulase complex from P. verruculosum and is undoubtedly of interest as a substrate for scaling up biotechnological processes of the bioconversion of renewable plant-derived materials.     

Synthesis of High Refractive Index Silicone Materials Incorporating Aromatic Moieties with Adjacent Linkage Groups for Flexible Electronic Displays

The refractive index study of copoly(arylene-siloxane)s constructed with amide, ester, or ether linkage units was conducted to synthesize a step-growth polymer for application in flexible displays. The copoly(arylene-siloxane) based materials have potential use in optical applications due to their durability, flexibility, and possession of good optical clarity properties when compared to conventional silica-filled polydimethylsiloxane-based materials. Measurement of refractive index (RI) was used as the main mode of analysis due to its direct correlation to optical clarity and material flexibility. Synthesis and characterization, including RI compiled data, was performed for six series of step-growth polymers. Effects of different linkage units, namely amides, esters, and ethers, adjacent to at least one six-membered cyclic unit (aromatic or aliphatic) were evaluated. It was observed that the refractive index of these polymers was directly proportional to the aryl content; however, the influence on RI was not equal across all types of linkage units. The highest RI copolymer, poly(4,4-methylenediphenyl diisocyanate-co-carbinol-terminated polydimethylsiloxane) (MDI-SD1.0k), yielded refractive index 1.470 and molecular weight (M_n) 16,100 g/mol; however, the copolymer poly(toluene-2,4-diisocyanate-co-carbinol-terminated polydimethylsiloxane) (TDI-SD) had the highest RI (1.462) per phenyl content. The 4,4-methylenediphenyl diisocyanate (MDI), toluene-2,4-diisocyanate (TDI), and hydrogenated methylenediphenyl-4,4-diisocyanate (HMDI) amide containing linkages best improved the refractive indices of the materials studied.     

Effect of titanium–magnesium catalyst morphology on the properties of polypropylene upon propylene polymerization in a liquid monomer

The effect of the particle size of an IK-8-21 domestic titanium-magnesium catalyst on the properties of polypropylene (PP) produced during the polymerization of propylene in a liquid monomer is studied. Catalysts with particle sizes of 20 to 64 μm are shown to have high activity and identical sensitivity to hydrogen and allow PP to be obtained with a narrow distribution of particles over size, high isotacticity, and close values of crystallinity, melting temperature, and physicomechanical properties. A slight decrease in the activity and bulk density of PP powder is observed when the average size of catalyst particles is increased from 20 to 43 μm. A more notable reduction in the activity and bulk density of PP powder is observed for catalyst with particle sizes of 62 to 64 μm. IK-8-21 catalyst is not inferior to its foreign analogues with respect to the properties of the resulting PP.     

Lactic acid production using free cells of bacteria and filamentous fungi and cells immobilized in polyvinyl alcohol cryogel: A comparative analysis of the characteristics of biocatalysts and processes

The results from studies and a comparative analysis of process characteristics are presented for lactic acid (LA) production from glucose, performed under batch conditions of the long-duration use of different biocatalyst samples comprising cells of Lactobacillus сasei bacteria and Rhizopus oryzae filamentous fungi immobilized in polyvinyl alcohol (PVA) cryogel or applied as concentrated suspensions. It is established that for LA production, the bacteria and fungi must be used in the form of PVA-cryogel-immobilized cells because their half-life in this form is considerably longer than that of concentrated cell suspensions. After 200 h of the batch use of the same immobilized cell samples, the amounts of accumulated LA were similar for both fungal (920 ± 5 g) and bacterial (895 ± 5 g) biocatalysts. The fungal biocatalyst, however, was characterized by a twice higher rate of substrate conversion to product (0.92 g LA per 1 g glucose) than the bacterial biocatalyst. The half-life of the immobilized fungal biocatalyst was 80 days (96 working cycles), ten times longer than that of the bacterial biocatalyst. A comparison of our data and the literature data demonstrated the promise of using fungal cells immobilized in PVA cryogel to produce LA: the process based on their use is superior to all known processes in its main indicators, i.e., the rate of LA conversion to glucose and the maximum accumulated concentration of the product.