调频步进信号处理方法探讨

调频步进信号是一种新的高距离分辨率信号。文章首先简要阐述了线性调频信号的处理过程；其次对比步进频率、线性调频步进信号的处理过程，得到一种新的处理方法-合成处理法，最后通过仿真论证其正确性。     

Quality-of-Service Based Protection in MPLS Control WDM Mesh Networks

Intelligent methods for automatic protection and restoration are critical in optical transport mesh networks. This paper discusses the problem of quality-of-service (QoS)-based protection in terms of the protection-switching time and availability for end-to-end lightpaths in a WDM mesh network. We analyze the backup lightpath-sharing problem in such networks and study the correlation of the working lightpaths and the impact of the correlation on the sharing of the backup lightpaths. We present a multi-protocol-label-switching (MPLS) control-based fully distributed algorithm to solve the protection problem. The proposed algorithm includes intelligent and automatic procedures to set up, take down, activate, restore, and manage backup lightpaths. It greatly reduces the required resources for protection by allowing the sharing of network resources by multiple backup lightpaths. At the same time, it guarantees, if possible, to satisfy the availability requirement even with resource sharing by taking the correlation of working lightpaths into consideration. A simple analysis of the proposed algorithm in terms of computation time and message complexity indicates that the implementation of the algorithm is practical. The illustrative studies that compare the performance of 1:1, unlimited sharing, and QoS-based backup sharing algorithms indicate that QoS-based sharing achieves comparable performance as unlimited sharing, which is much better than the 1:1 backup scheme in terms of connection blocking probability, average number of connections in the network for a given offered load, and network resource utilization.     

随动系统数字化改装中PWM系统的研究

描述了一个随动系统数字化改装中 PWM系统的研究 ,并给出了计算机辅助分析的程序流程图 ,为类似装备的数字化改造提供了有效的参考     

关于Ada95变体部分等语法的修正意见

本文指出了Ａｄａ９５ 参考手册中记录变体部分、记录聚集、分情形语句与异常处理段等语法描述中存在的问题，并分别给出了它们的修正方案。     

弹药内弹道性能检验新方法数学模型的建立

本文对弹药内弹道性能检验的传统方法存在的问题进行了分析,提出了一种新的检验方法,重点对新的检验方法的数学模型的建立过程进行了论述。并对数学模型的精度进行了分析、检验和验证。     

钨在铂电极上成核动力学研究

采用循环伏安法和计时电流法研究了钨在ＫＦ－Ｂ２Ｏ３－Ｋ２ＷＯ４（６２－３７－１ｍ／ｏ）熔体中（Ｔ＝７９５℃）铂电极上成核动力学过程。实验结果表明：该过程符合扩散步骤控制的半球形三维晶核连续成核长大的动力学规律。     

一种多输入队ATM交换结构

本文提出一种多输入排队ＡＴＭ交换结构和相应的输出冲突解决方法，它可以使交换网络避免输入队固有的排头阻塞，从而使网络在不增加运行速率的情况下，可达到输出排队的性能。文中介绍了冲突解决办法及其实现技术，说明它可方便地在高速网中实现。     

A weight function technique in three-dimensional fracture mechanics: static and dynamic

The weight function technique is used to analyse both static and dynamic three-dimensional fracture mechanics problems. The weight functions are first determined, in terms of Laplace transforms, by an indirect boundary element method. The stress intensity factor in the time domain is then obtained by Durbin's inversion method. The dynamic stress intensity factors are calculated for a central square crack in a square bar and a circular or elliptical crack in a cylinder under different types of loads. An extension of the method for arbitrary dynamic loads is developed via a dynamic Green's function approach.     

油溶性减阻功能聚合物的研制

介绍了以混合α-烯烃为原料,制备了具有减阻功能的共聚物。讨论了催化剂浓度、聚合温度、预聚合时间、原料单体中杂质含量对共聚物特性粘度和转化率的影响。试验表明,在较低的催化剂浓度和预聚合温度下,能得到较高分子量的聚合物。气相色谱法和DSC法测定其组成和单体混合物的组成基本一致,表明共聚物是一种无规的梳状结构聚合物。该聚合物达到较高特性粘度时,能获得较好的减阻率。     

基于IFS分形理论的信源编码技术的研究

本文首次系统地研究了基于ＩＦＳ分形理论的信源压缩编码与传统方法的关系。