航空发动机噪声地面反射效应计算方法

为了获得准确性更好、适用范围更广的航空发动机噪声地面反射效应计算方法,文章对不同地面声阻抗模型以及噪声干涉效应模型下的地面反射效应进行频率响应特征分析。与公开的试验数据进行对比,结果表明地面声阻抗模型是影响噪声地面反射效应的关键因素。当地面有效声阻抗的不确定性较大时,选择变量个数较少的地面声阻抗特征方程,可以获得准确性更高的噪声地面反射效应的预测结果。根据对比结果,文章提出了一种航空发动机噪声地面反射效应计算方法,为发动机噪声适航性预测程序的升级提供了优化思路。     

微波杀菌及包装材料的微波穿透性对湿豆皮保鲜品质的影响

目的 探究不同包装材料结合微波杀菌对湿豆皮保鲜效果的影响,为湿豆皮提供新的保鲜方案。方法 将湿豆皮分别装入OPP/PE和PET/PE/CPP材料的包装袋中,经密封后进行微波杀菌处理,测定其贮藏期间的指标。结果 经微波处理后,湿豆皮在OPP/PE中的表面温度比在PET/PE/CPP中高8 ℃,菌落总数少0.66 lg(CFU/g),说明微波更易穿透OPP/PE材料,更能有效延缓长期贮藏中因微生物活动造成的氧气含量下降和二氧化碳上升,延缓湿豆皮的pH值、水分含量和拉伸性的下降,抑制其TVB-N含量的上升,从而抑制组织结构的破坏,减缓脂质酸败的速率,还可减小色差的变化幅度,维持更高的感官评价得分。结论 采用微波处理能够有效延长湿豆皮的保鲜期,OPP/PE和PET/PE/CPP材料组湿豆皮的保鲜期分别延长了15、12 d左右,且对不同材料包装的湿豆皮品质的影响差异显著。采用微波穿透性更好的包装材料,其微波作用强度更大,杀菌效果更明显,保鲜效果更好。     

Room-Temperature Magnetic Skyrmions and Large Topological Hall Effect in Chromium Telluride Engineered by Self-Intercalation

Room-temperature magnetic skyrmion materials exhibiting robust topological Hall effect (THE) are crucial for novel nano-spintronic devices. However, such skyrmion-hosting materials are rare in nature. In this study, a self-intercalated transition metal dichalcogenide Cr_1+xTe₂ with a layered crystal structure that hosts room-temperature skyrmions and exhibits large THE is reported. By tuning the self-intercalate concentration, a monotonic control of Curie temperature from 169 to 333 K and a magnetic anisotropy transition from out-of-plane to the in-plane configuration are achieved. Based on the intercalation engineering, room-temperature skyrmions are successfully created in Cr_1.53Te₂ with a Curie temperature of 295 K and a relatively weak perpendicular magnetic anisotropy. Remarkably, a skyrmion-induced topological Hall resistivity as large as ≈106 nΩ cm is observed at 290 K. Moreover, a sign reversal of THE is also found at low temperatures, which can be ascribed to other topological spin textures having an opposite topological charge to that of the skyrmions. Therefore, chromium telluride can be a new paradigm of the skyrmion material family with promising prospects for future device applications.     

纳米碳中的微观缺陷结构特征

测定了定向石墨和纳米碳的正电子寿命谱,结果表明,热解法制备的纳米碳存在开空间小于单空位的自由体积以及开宽间相当于约１０个空位聚集体全的微孔洞,比较了热解法制备的纳米碳,ＵＦＰ冷压法制备的纳米Ｆｅ和纳米ＴｉＯ２以有非晶晶化法制备的纳米ＮｉＰ的缺陷结构特征,结果为纳米ＮｉＰ中缺陷的电子密度最高,纳米Ｆｅ和纲米ＴｉＯ２次之,纳米碳的最低,纳米碳中的缺陷浓度最高,纳米Ｆｅ和纳米ＴｉＯ２的次之,纳米ＮｉＰ的     

用边界轮廓法求解断裂力学L积分

证明断裂力学Ｌ积分方程的被积函数的散度等于零,将面积分转化为线积分,使求解问题的维数降低两维。利用边界轮廓法的结果,使平面断裂问题Ｌ积分的求解转化为边界点的位移和面力线性迭加,避免了求解数值积分。     

高聚物中渗入C_(60)/C_(70)后计算内阻的压力函数法

应用宏观力学模型对高聚物渗入Ｃ６０／Ｃ７０后的微观内阻机理进行力学分析,提出分子滚珠轴承的设想,得出计算内阻的压力函数法和滚滑内阻权函数的概念。     

火箭弹壳体强度的计算机辅助分析

研究了用计算机进行火箭弹受载及壳体强度计算;建立了适合于对火箭弹进行强度计算的模型;编制了相应的计算程序．程序可靠、使用方便,可以满足对火箭弹以及其它空中飞行体进行强度计算的要求．     

Optimal reactive power dispatch using an adaptive genetic algorithm

This paper presents an adaptive genetic algorithm (AGA) for optimal reactive power dispatch and voltage control of power systems. In the adaptive genetic algorithm, the probabilities of crossover and mutation, p_c and p_m, are varied depending on the fitness values of the solutions and the normalized fitness distances between the solutions in the evolution process to prevent premature convergence and refine the convergence performance of genetic algorithms. The AGA applied for optimal power system reactive power dispatch is evaluated on an IEEE 30-bus power system in which the control of bus voltages, tap position of transformers and reactive power sources are involved to minimize the transmission loss of the power system.     

ZrO2在β"─Al2O3复合陶瓷中的作用

本文研究了四方和立方ZrO₂在与Na-β"-Al₂O₃的复合陶瓷中作为第二相所起的各种作用。结果说明ZrO₂对复合陶瓷具有细化晶粒、改善显微结构、提高强度和断裂韧性的作用,与此同时也在一定程度上降低离子电导率。在提高力学性能方面,四方ZrO₂除了具有与立方ZrO₂相同的弥散颗粒的作用外,相变所起的作用也是很显着的。ZrO₂-Na-β"-Al₂O₃复合陶瓷是一种有应用价值的固体电解质材料。     

An efficient microfluidic sorter: implementation of double meandering micro striplines for magnetic particles switching

The ability to trap, manipulate, and separate magnetic beads has become one of the key requirements in realizing an integrated magnetic lab-on-chip biosensing system. In this article, we present the design and fabrication of an integrated magneto-fluidic device for sorting magnetic particles with a sorting efficiency of up to 95%. The actuation and manipulation of magnetic beads are realized using microfabricated square meandering current-carrying micro striplines. The current is alternated between two neighboring micro striplines to switch the magnetic beads to either one of the two outlets. We performed a series of parametric study to investigate the effect of applied current, flow rate, and switching frequency on the sorting efficiency. Experimental results reveal that the sorting efficiency is proportional to the square of current applied to the stripline, and decreases with increasing buffer flow rate and switching frequency. Such phenomena agree well with our theoretical analysis and simulation result. The fastest switching rate, which is limited by the microchannel geometry and bead velocity, is 2 Hz.