Fabrication of Bulk β-FeSi2 Crystal With ThreeDimensional Alignment by an Oscillating Magnetic Field

It has been reported that an anisotropic magnetic field could produce the three-dimensional alignment of fine single-crystal particles with the orthorhombic crystal structure.However,the three-dimensional alignment was achieved only in suspensions.Fabrication of bulksinglematerials that have the three-dimensional alignment of grains has been desired.This study proposes a procedure for the fabrication,which consists of slip casting under an oscillating magnetic field and sintering.Optimization of casting and sintering conditions achieved the three-dimensionally aligned bulkβ-FeSi₂.     

Inhibition effect of CO on hydrogen permeability of Pd–Ag membrane applied in a microchannel module configuration

The surface adsorption effect of CO on the hydrogen permeability of a 12.5 micron-thick Pd₇₇Ag₂₃ membrane has been evaluated quantitatively under experimental conditions close to the operating conditions of the highly-efficient membrane reformer (MRF) system developed by Tokyo Gas. The permeability of the membrane was measured in the conditions of CO concentration between 1 and 5 vol.% at a temperature and pressure of up to 500 °C and 0.6 MPa, respectively. High feed flow rates and a microchannel module configuration were applied in the flux measurements to ensure that the results are obtained with limited influence of concentration polarization adjacent to the membrane surface and hydrogen depletion along the microchannel length. While the CO inhibition effect was close to negligible at 500 °C, it was significant at lower temperatures. At a feed pressure of 0.2 MPa, the CO inhibition effect was only 0.2% at a CO concentration of 1 vol.% and the effect was 3.6% at a CO concentration of 5 vol.% at 500 °C. The CO inhibition effect were 3.4% for 1 vol.% CO and 14.1% for 5 vol.% CO at 400 °C. Measurements were also carried out at a high feed pressure of 0.6 MPa to evaluate the pressure dependence of the CO inhibition effect. The CO inhibition effect decreased to 0.7% at a CO feed concentration of 5 vol.% at 500 °C. Lower CO inhibition effect were also observed at 450 and 400 °C compared to the data obtained with the feed pressure of 0.2 MPa, while the inhibition levels were almost the same at 350 °C. Though the CO inhibition effect is larger at a lower feed pressure of 0.2 MPa, the effect was only 0.2% at 1 vol.% CO at 500 °C, which is close to the operating conditions of the MRF system. This study quantitatively revealed that the CO inhibition effect on hydrogen flux is extremely small when the membrane is operated at temperatures equal to or higher than 500 °C, even for state-of-the-art thin membranes. The performance of the Tokyo Gas MRF seems thus mainly limited by concentration polarization effects.     

Evaluation of 9-cis retinoic acid for a new remedy of human retinoblastoma

We investigated the effect of two isomers of retinoic acid (RA), all-trans RA and 9-cis RA, on the proliferation of Y79 human retinoblastoma cells. The two isomers inhibited the cell proliferation in a concentration-dependent manner. The IC50 for this inhibition by all-trans RA and 9-cis RA was 1.50 and 0.15 microM, respectively. The inhibitory effect of 9-cis RA on Y79 cell growth was observed within 24 hr, thereafter the cell number was gradually decreased. In contrast, no inhibition by all-trans RA of Y79 cell growth was observed within 24 hr, thereafter the cell number was slightly increased. In these cases, the cell viability at 4 days after the addition of 9-cis RA and all-trans RA was more than 90% and 95%, respectively. These results indicate that the two RA inhibit the proliferation of Y79 human retinoblastoma cells without inducing the cell death and that the effect of 9-cis RA on the inhibition of Y79 cell growth is much greater than that of all-trans RA.     

Halo congenital nevus undergoing spontaneous regression. Involvement of T-cell immunity in involution and presence of circulating anti-nevus cell IgM antibodies

BACKGROUND: Halo congenital nevus is a condition in which halo formation is associated with congenital nevocellular nevi. Although several theories have been proposed, the immunologic mechanisms of halo formation and concomitant nevus regression still remain unclear. We presented immunologic findings in a case of halo congenital nevus with unique histologic location of inflammatory cells. OBSERVATIONS: Histologically, the present case of halo congenital nevus undergoing spontaneous regression showed a marked inflammatory infiltrate with remnants of original nevus cell nests. In the infiltrating T cells, CD8+ cells outnumbered CD4+ cells and the infiltrate of natural killer cells was not substantial. Direct and indirect immunofluorescence studies demonstrated the presence of IgM antibodies against nevus cells as well as melanoma cells and cultured melanocytes in the patient's serum. CONCLUSIONS: Our findings suggest that both T-cell-mediated immunity and IgM antibodies may be involved in the regression of halo congenital nevus. However, it is important to point out that our results may simply be epiphenomena and not directly responsible for the destruction of nevus cells.     

Simultaneous three-dimensional step-height measurement and high-resolution tomographic imaging with a spectral interferometric microscope

A noncontact, nonmechanical scanning, wide-field spectral interference microscope is developed for simultaneous measurement of three-dimensional step-height of discontinuous objects and tomographic imaging. A superluminescent diode (SLD) is used as a broadband light source and a liquid-crystal Fabry-Perot interferometer (LC-FPI) as a frequency-scanning device. By means of changing the injection current to the SLD, the spectral profile of the SLD is equalized, and a constant light input to the interferometer is achieved over the entire frequency-scan range. The Fourier-transform technique is used to determine both the amplitude and the phase of spectral fringe signals. Three-dimensional height distribution of a discontinuous object is obtained from the phase information, whereas optically sectioned images of the object are obtained either from the amplitude information alone or from the combination of both the amplitude and phase information. Experimental results with submicrometer resolution are presented for both step-height measurement and tomographic sectioning.     

Input/output facilities in LISP 1.9

LISP1.9 provides new input/output facilities, the conceptual channel and the current channel, which make program writing easier and execution faster. The channel attributes-column-setting, line number option, prompt-string, user-buffer, eol-handler, eof-handler and access rights-are useful for program writing; the channel interaction attributes-input-memo, output-memo and file I/O verification-are useful for system development. Random file I/O, array I/O, record handling, array-string conversion and Japanese character output are also provided.     

Reverse osmosis rejection by hydrous inorganic precipitate–cellulose composite membrane

Composit membranes were prepared by impregnating hydrous inorganic precipites (Fe and Cr oxides, nickel chromate or molybdate) into a cellulose acetate membrane which serves as a support. In these membranes, the hydrous iron oxide composite membrane showed high reverse osmosis properties. The permeability of the composite membrane did not decline with time, and the rejection of organic solute was not appreciably affected by impregnation. However, the rejection of electrolyte increased with impregnation. The measurements of membrane potential revealed that salt rejection is primarily attributable to the effect of membrane charge, i.e., to ion exclusion effect. In electrolyte solutions of 1:1 and 2:1, the membrane was anion selective; on the other hand, in electrolyte solution of 1:2, the membrane was cation selective. These results are characteristic of impregnated hydrous metal oxide.     

Change in fine structure of nylon 6 gut yarn in twisting,annealing, and untwisting processes. I. Observation by WAXD,SAXD, and EM

To obtain information on the change in fine structure of nylon 6 taking place during practical false-twisting processes, the manner of change in the three elemental processes, i.e., twisting, annealing, and untwisting, was studied. For simplicity, nylon 6 gut yarn was used instead of multifilament yarn. Wide- and small-angle x-ray diffraction (WAXD and SAXD) together with electron microscopy (EM) were used here. The degree of molecular orientation in the crystalline region of the twisted yarn gradually decreases with increase of the twist number (TN) in the region of TN ? 100. The long spacing, determined by SAXD, of the twisted yarn increases with increases in TN. The increase in long spacing cannot be interpreted only by macroscopic strain or elongation of the yarn in the twisting process. This difference seems to arise from the contribution of the decrease of lateral size of lamellae to the average long spacing; therefore the increase in long spacing should be attributed to the elongation of the amorphous region, deduced from the crystallinity measured by WAXD and the long spacing diffraction. The angle between the streak line on the surface of twisted yarn observed by EM and the fiber axis agrees well with the twist angle of the yarn. The crystal lamellae are stacked normal to the streak line at the initial stage, i.e., at a low value of TN, but they begin to deviate from the normal direction with increase in TN, accompanied by their partial destruction. Based on SAXD and density measurements, the internal strain of yarn annealed after twisting is fully relaxed. When the yarn is untwisted after twisting and annealing, the crystal orientation recovers gradually to that of the untreated yarn. The chain axis within the lamellae in the center region of the yarn becomes nearly parallel to the fiber axis, but the chain axis in the outer region does not.     

Evidence that activation of Src family kinase is not required for fertilization-associated [Ca2+]i oscillations in mouse eggs

Recent evidence in marine invertebrate, frog, and zebrafish eggs suggests the involvement of a Src family kinase (SFK) in fertilization-induced Ca2+ release. In the present study, we have investigated whether activation of an SFK is required for initiation of intracellular Ca2+ ([Ca2+]i) oscillations in mouse fertilization. We detected a Hck-like protein and tyrosine-phosphorylated proteins in soluble and insoluble sperm fractions, respectively. However, the presence of these proteins did not correspond to the active fractions of porcine sperm extracts (pSE). Moreover, [Ca2+]i oscillations induced by pSE in mouse eggs were unaltered by pre-incubation of pSE with specific SFK inhibitors such as 4-amino-5-(4-chlorophenyl)-7-(t-butyl)pyrazol[3,4-d]-pyrimidine (PP2) or lavendustin A, despite the fact that the inhibitors were shown to be active both in vivo and in vitro. Another SFK inhibitor, peptide A, blocked oscillations when incubated with pSE prior to injection into eggs, but this inhibition required more than ten times the concentration reportedly required to inhibit SFK activity. In addition, pre-injection or pre-incubation of eggs with these inhibitors did not affect the ability of pSE to trigger [Ca2+]i oscillations in mouse eggs. Microinjection of a recombinant c-Src protein or mRNAs encoding constitutively active Src proteins did not induce [Ca2+]i release. Finally, when sperm and eggs, both of which were pre-treated with PP2, were fertilized, [Ca2+]i oscillations occurred normally. We can therefore conclude that activation of an SFK is neither necessary nor sufficient for triggering fertilization-induced [Ca2+]i oscillations.     

Spectral interference Mirau microscope with an acousto-optic tunable filter for three-dimensional surface profilometry

A nonmechanical scanning Mirau-type spectral interference microscope has been developed for the measurement of three-dimensional surface profiles of discontinuous objects. An acousto-optic tunable filter (AOTF) is used as a high-resolution spectral filter, which scans the optical frequency of the broadband light emitted from a superluminescent diode. To generate spectral fringes that make full use of the limited coherence length of the filtered light we unbalanced the Mirau interferometric system by positioning the reference mirror nearly halfway between the top and the bottom of the step height. When the frequency of the broadband light source is scanned by an AOTF, the interference fringes move in opposite directions on the top and the bottom of the object. To uniquely determine the sign of the fringe movement over the large area of the object, we developed a three-dimensional Fourier-transform technique, and from the detected sign of the fringe movement and phase information, we determined the three-dimensional step height. Experimental results of the measurement of 100-microm step height are presented. The main advantages of the proposed system are that it provides nonmechanical scanning and a large measurement range without ambiguity in the sign of the phase.