The effect of phosphate treatment on nickel dispersion on MCM-41 mesoporous material

The incorporation of nickel into mesoporous molecular sieves MCM-41 was carried out. Ni-PO/MCM41 and Ni-C1/MCM41 were prepared by using Ni(II) acetate solution adjusted to pH=2.5 with phosphoric acid and hydrochloric acid, respectively, by the incipient wetness method. Photoacoustic spectroscopy (PAS) was used to study the local environments of Ni(II) incorporated into mesopores. The PAS of as-prepared Ni/MCM41, Ni-Cl/MCM41, and Ni-PO/MCM41 with Ni(II) acetate solution exhibits two bands of λ_max around 400 nm and 750 nm, which could be assigned to the³A_2g→³T_lg(F) and the³A_2g→³T_lg(P) transition of octahedral Ni(II) species. After calcination, Ni ion within Ni-PO/MCM41 dispersed atomically onto the surface of MCM-41 channel as an octahedral species without the transformation to nickel oxide phase, while Ni ion within Ni-Cl/MCM41 and Ni/MCM41 transformed to nickel oxide phase. It may be attributed to the fact that each Ni ion is separated by the phosphate grafted to surface silanol group. The effects of phosphoric acid on the dispersity of Ni ion within MCM-41 have been investigated using³¹P and²⁹Si MAS NMR spectroscopy and X-ray photoelectron spectroscopy.     

Construction and evaluation of scaled korean side impact dummies

It is necessary to have a dummy that describes the anthropometry of a victim with accuracy. This study presents three scaled side impact dummies constructed for the use of MADYMO. They represent five, fifty and ninety-five percentile Korean males ranged from the age of 25 through 39. Thirty-five anthropometric data were used to scale input files required for MADYSCALE. Geometries, inertia, joints and other parameters for dummies were scaled based on the configurations of EuroSID-1. This study proposes the lateral impact response requirements for head, thorax and pelvis of Korean side impact dummies. A lateral drop impact test was conducted for the head at the height of 200 mm. Lateral pendulum impact tests were also carried out for thorax and pelvis at three specific impact velocities. All these test results were obtained from simulation based on MADYMO. All the procedures of the three tests followed the requirement of ISO/TR 9790.     

Performance study of a falling-film absorber with a film-inverting configuration

This paper describes the development of a novel film-inverting design concept for falling-film absorbers. The solid surface of the absorber is segmented so that both surfaces of the falling-film are alternatively cooled in a periodic manner. A conventional tubular absorber is modified by introducing film-guiding fins between tubes to produce a film-inverting arrangement. A maximum increase in vapour absorption rate of about 100% is obtained with the film-inverting design compared to the tubular absorber. The numerical simulation indicates that the vapour absorption rate can be increased by using a large number of film-inverting segments in the absorber.     

A generalized correlation for refrigerant mass flow rate through adiabatic capillary tubes

A capillary tube is a common expansion device used in small sized refrigeration and air-conditioning systems. A generalized correlation for refrigerant flow rate in adiabatic capillary tubes is developed by implementing dimensionless parameters based on extensive experimental data for R-22, R-290, and R-407C measured in this study. Dimensionless parameters are derived from the Buckingham Pi theorem, considering the effects of tube inlet conditions, capillary tube geometry, and refrigerant properties on mass flow rate. The generalized correlation yields good agreement with the present data for R-22, R-290, and R-407C with average and standard deviations of 0.9 and 5.0%, respectively. Approximately 97% of the present data are correlated within a relative deviation of ±10%. Further assessments of the correlation are made by comparing the predictions with measured data for R-12, R-134a, R-152a, R-410A, and R-600a in the open literature. The correlation predicts the data for those five refrigerants with average and standard deviations of −0.73 and 6.16%, respectively.     

A dispatching method for automated guided vehicles by using a bidding concept

A dispatching method is suggested for automated guided vehicles by using an auction algorithm. The dispatching method in this study is different from traditional dispatching rules in that it looks into the future for an efficient assignment of delivery tasks to vehicles and also in that multiple tasks are matched with multiple vehicles. The dispatching method in this study is distributed in the sense that the dispatching decisions are made through communication among related vehicles and machines. The theoretical rationale behind the distributed dispatching method is also discussed. Through a simulation study, the performance of the method is compared with that of a popular dispatching rule. RID="*" ID="*" The research was financially supported by the Sasakawa Scientific Research Grant from The Japan Science Society. The original version of the simulation program is provided by Professor Jae Yeon Kim at Dong Yang University, Korea. Correspondence to: J. K. Lim     

Isosurfaces as deformable models for magnetic resonance angiography

Vascular disease produces changes in lumenal shape evident in magnetic resonance angiography (MRA). However, quantification of vascular shape from MRA is problematic due to image artifacts. Prior deformable models for vascular surface reconstruction primarily resolve problems of initialization of the surface mesh. However, initialization can be obtained in a trivial manner for MRA using isosurfaces. We propose a methodology for deforming the isosurface to conform to the boundaries of objects in the image with minimal a priori assumptions of object shape. As in conventional methods, external forces attract the surface toward edges in the image. However, smoothing is produced by a moment that aligns the normals of adjacent surface triangles. Notably, the moment produces no translational motion of surface triangles. The deformable isosurface was applied to a digital phantom of a stenotic artery, to MRA of three renal arteries with atherosclerotic disease and MRA of one carotid artery with atherosclerotic disease. Results of the surface reconstruction from the deformable model were compared with conventional X-ray angiography for the renal arteries. Measurement of the degree of stenosis of the renal arteries was within 12% +/- 6%. The deformable model provided improvements over the isosurface in all cases in terms of measurement of the degree of stenosis or improving the surface smoothness.     

Reconstruction of conductivity and current density images using only one component of magnetic field measurements

Magnetic resonance current density imaging (MRCDI) is to provide current density images of a subject using a magnetic resonance imaging (MRI) scanner with a current injection apparatus. The injection current generates a magnetic field that we can measure from MR phase images. We obtain internal current density images from the measured magnetic flux densities via Ampere's law. However, we must rotate the subject to acquire all of the three components of the induced magnetic flux density. This subject rotation is impractical in clinical MRI scanners when the subject is a human body. In this paper, we propose a way to eliminate the requirement of subject rotation by careful mathematical analysis of the MRCDI problem. In our new MRCDI technique, we need to measure only one component of the induced magnetic flux density and reconstruct both cross-sectional conductivity and current density images without any subject rotation.     

Estimation of anomaly location and size using electrical impedance tomography

We developed a new algorithm that estimates locations and sizes of anomalies in electrically conducting medium based on electrical impedance tomography (EIT) technique. When only the boundary current and voltage measurements are available, it is not practically feasible to reconstruct accurate high-resolution cross-sectional conductivity or resistivity images of a subject. In this paper, we focus our attention on the estimation of locations and sizes of anomalies with different conductivity values compared with the background tissues. We showed the performance of the algorithm from experimental results using a 32-channel EIT system and saline phantom. With about 1.73% measurement error in boundary current-voltage data, we found that the minimal size (area) of the detectable anomaly is about 0.72% of the size (area) of the phantom. Potential applications include the monitoring of impedance related physiological events and bubble detection in two-phase flow. Since this new algorithm requires neither any forward solver nor time-consuming minimization process, it is fast enough for various real-time applications in medicine and nondestructive testing.     

Physicochemical characterization of diclofenac sodium-loaded poloxamer gel as a rectal delivery system with fast absorption

Rectal poloxamer gel systems composed of poloxamers and bioadhesive polymers were easy to administer to the anus and were mucoadhesive to the rectal tissues without leakage after the dose. However, a poloxamer gel containing diclofenac sodium could not be developed using bioadhesive polymers, since the drug was precipitated in this preparation. To develop a poloxamer gel using sodium chloride instead of bioadhesive polymers, the physicochemical properties such as gelation temperature, gel strength, and bioadhesive force of various formulations composed of diclofenac sodium, poloxamers, and sodium chloride were investigated. Furthermore, the pharmacokinetic study of diclofenac sodium delivered by the poloxamer gel was performed. Diclofenac sodium significantly increased the gelation temperature and weakened the gel strength and bioadhesive force, while sodium chloride did the opposite. The poloxamer gels with less than 1.0% sodium chloride, in which the drug was not precipitated, were inserted into the rectum without difficulty and leakage, and were retained in the rectum of rats for at least 6 hr. Furthermore, poloxamer gel gave significantly higher initial plasma concentrations and faster T_max of diclofenac sodium than did solid suppository, indicating that drug from poloxamer gel could be absorbed faster than that from the solid one in rats. Our results suggested that a rectal poloxamer gel system with sodium chloride and poloxamers was a more physically stable, convenient, and effective rectal dosage form for diclofenac sodium.