Effect of the New York State cigarette fire safety standard on ignition propensity, smoke constituents, and the consumer market

Objectives: This study examines empirical evidence from the New York experience testing tobacco industry arguments made in opposition to fire safety standards for cigarettes. Design: Percentages of cigarettes exhibiting full length burns (FLBs), cigarette sales before and following the implementation of the New York standards, a sample of retail cigarette prices, brand availability, and selected smoke constituent yields were compared between cigarettes sold in New York and two other states. Cigarette paper analysis was conducted on cigarettes sold in New York. Results: New York cigarette brands averaged 10.0% FLBs as compared to 99.8% for California and Massachusetts brands. Reduced ignition propensity (RIP) appears to have been achieved by cigarette paper banding. Cigarette sales, prices, and brand availability do not appear to have been affected by the New York standards. Yields of the majority of smoke constituents tested did not differ substantially between RIP cigarettes sold in New York as compared to the same brands sold in Massachusetts. Average yields of tar, carbon monoxide, and two compounds were slightly higher, the yields of seven compounds were higher for one brand only, and nicotine was lower, among New York brands tested. Conclusions: RIP cigarette brands have been designed to meet the New York fire safety standards. Their introduction has not affected cigarette sales or prices in New York. There is no evidence that the small increases in smoke constituent yields affect the already highly toxic nature of cigarette smoke. Data on smoking caused fires, deaths, and injuries dating from after the change in law are not yet available. Such data will be able to address the question of whether the demonstrated reduced ignition standards are associated with reduced fires and injuries. Based on the New York experience, prior industry objections to producing RIP cigarettes are unfounded. Other states and nations should adopt similar standards.     

Antioxidative activities of bran extracts from twenty one pigmented rice cultivars

Ethanol–water (70:30, v/v) extracts from the bran of rice seeds from twenty one pigmented and one nonpigmented rice cultivars were evaluated for antioxidative activities using the following tests: inhibition of peroxidation of linoleic acid; inhibition of peroxidation of rabbit lipid erythrocyte membranes; reduction of potassium ferricyanide, and scavenging of superoxide anions and hydroxyl radicals. With some exceptions, extracts from the pigmented rice seeds had higher antioxidative activity than did the nonpigmented variety. The following pigmented cultivars had the highest antioxidative activities in all tests: Jumlalocal-1, Parnkhari 203, DZ78, LK1-3-6-12-1-1, and Elwee. A significant correlation was also noted between reducing power, inhibition of erythrocyte ghost membrane peroxidation, and superoxide anion and hydroxyl radical scavenging. The results suggest that: (a) ferricyanide reducing power might be a useful and simple index for large-scale evaluation of antioxidative potencies of natural products present in rice; (b) pigmented rice varieties with high antioxidative activities provide a source of antioxidants and a genetic resource to develop new health-promoting rice cultivars.     

On stability of an input amplitude constrained predictive control system

This paper presents stability results for discrete-time model-based predictive control system subject to an input amplitude constraint. It is shown that the input amplitude constrained control system may provide a stable control system in the sense of BIBO when the system to be controlled is of a class of the system poles which consist of multiple integrators and a stable polynomial. The solution of Diophantine equations and their properties are addressed. Simulation study is also carried out and it is shown that the output of the system may converge to the reference signal for certain degree of constraints.     

Hydrogen adsorption on and diffusion through MoS2 monolayer: First-principles study

We investigate the hydrogen adsorption on and diffusion through the MoS₂ monolayer based on density-functional theory. We show that the hydrogen atom prefers to bond to the S atom at the monolayer, leading to enhanced conductivity. The hydrogen atom can also adsorb at the middle of the hexagon ring by overcoming an energy barrier of 0.57 eV at a strain of 8%. Also, we show that the MoS₂ monolayer is flexible and any mechanical deformation of the monolayer is reversible because the extension of the Mo–S bond is much smaller than the applied strain. The monolayer can block the diffusion of hydrogen molecule from one side to the other due to a high energy barrier (6.56 eV). However, the barrier can be reduced to 1.38 eV at a strain of 30% and even totally removed by creating S vacancies and applying a strain of 15%. The MoS₂ monolayer may find applications in sensors to detect hydrogen, and as mechanical valve to control the concentration of hydrogen gas.     

An analysis of the successful 1992 Massachusetts tobacco tax initiative

In November 1992, voters in Massachusetts (United States) passed a statewide tax initiative adding an extra 25 cents to the price of a pack of cigarettes. The Massachusetts Coalition for a Healthy Future, led by volunteers from the Massachusetts Division of the American Cancer Society, achieved this victory, despite a public anti-tax mood and $7.3 million spent by the tobacco industry. The tax has since generated millions of dollars for tobacco education and control programmes, leading to acceleration of the decline of tobacco consumption in the state. An analysis of the passage of this initiative should help other states considering this approach to tobacco control.


     

Wide-scan spherical-lens antennas for automotive radars

A new approach to wide scan-angle antennas at millimeter-wave frequencies is introduced with special focus on ease of manufacturing and reliability. The system is composed of planar feed antennas (tapered-slot antennas), which are positioned around a homogeneous spherical Teflon lens. Beam scanning can be achieved by switching between the antenna elements. The spherical-lens system is analyzed through a combined ray-optics/diffraction method. It is found that a maximum efficiency of 50%-55% can be achieved using Teflon, Rexolite, or quartz lenses. The efficiency includes taper, spillover, and reflection loss. Calculations also indicate that the maximum lens diameter is 30-40 λ₀, which results in a maximum directivity of 39.5-42 dB. Measurements done on a single-element feed and a 5-cm Teflon lens agree very well with theory and result in a 3-dB beamwidth of 5.5° and better than -20-dB sidelobe levels at 77 GHz. Absolute gain measurements show a system efficiency of 46%-48% (including dielectric loss). A 23- and 33-element antenna array with a scan angle of ±90° and a -3.5- and -6-dB crossover, respectively, in the far-field patterns was also demonstrated. The 23-element array resulted in virtually no gain loss over the entire 90° scan angle. This represents, to our knowledge, the first wide scan-angle antenna at millimeter-wave frequencies     

Targeted Delivery of Anesthetic Agents to Bone Tissues using Conductive Microneedles Enhanced Iontophoresis for Painless Dental Anesthesia

Pain management during dental procedures is a cornerstone for successful daily practice. In current practice, the traditional needle and syringe injection is used to administer local anesthesia. However, the appearance of long needles and the pain associated with it often leads to dental anxiety deterring timely interventions. Microneedles (MNs) have emerged as a minimally invasive alternative to hypodermic needles and shown to be effective in transdermal drug delivery applications. In this article, the potential use of MNs for local anesthesia delivery in dentistry is explored. The development of a novel conductive MN array that can be used in combination with iontophoresis technique to achieve drug penetration through the oral mucosa and the underlying bone tissue is presented. The conductive MN array plays a dual-role, creating micro-conduits and lowering the resistance of the oral mucosa. The reduced tissue resistance further enhances the application of a low-voltage current that is able to direct and accelerate the drug molecules to target the sensory nerves supplying teeth. The successful delivery of lidocaine using this new strategy in a clinically relevant rabbit incisor model is shown to be as effective as the current gold standard.     

Development of Phosphodiesterase–Protein-Kinase Complexes as Novel Targets for Discovery of Inhibitors with Enhanced Specificity

Phosphodiesterases (PDEs) hydrolyze cyclic nucleotides to modulate multiple signaling events in cells. PDEs are recognized to actively associate with cyclic nucleotide receptors (protein kinases, PKs) in larger macromolecular assemblies referred to as signalosomes. Complexation of PDEs with PKs generates an expanded active site that enhances PDE activity. This facilitates signalosome-associated PDEs to preferentially catalyze active hydrolysis of cyclic nucleotides bound to PKs and aid in signal termination. PDEs are important drug targets, and current strategies for inhibitor discovery are based entirely on targeting conserved PDE catalytic domains. This often results in inhibitors with cross-reactivity amongst closely related PDEs and attendant unwanted side effects. Here, our approach targeted PDE–PK complexes as they would occur in signalosomes, thereby offering greater specificity. Our developed fluorescence polarization assay was adapted to identify inhibitors that block cyclic nucleotide pockets in PDE–PK complexes in one mode and disrupt protein-protein interactions between PDEs and PKs in a second mode. We tested this approach with three different systems—cAMP-specific PDE8–PKAR, cGMP-specific PDE5–PKG, and dual-specificity RegA–R_D complexes—and ranked inhibitors according to their inhibition potency. Targeting PDE–PK complexes offers biochemical tools for describing the exquisite specificity of cyclic nucleotide signaling networks in cells.     

Hydration-Induced Void-Containing Hydrogels for Encapsulation and Sustained Release of Small Hydrophilic Molecules

Efficient encapsulation and sustained release of small hydrophilic molecules from traditional hydrogel systems are challenging due to the large mesh size of 3D networks and high water content. Furthermore, the encapsulated molecules are prone to early release from the hydrogel prior to use, resulting in a short shelf life of the formulation. Here, a hydration-induced void-containing hydrogel (HVH) based on hyperbranched polyglycerol-poly(propylene oxide)-hyperbranched polyglycerol (HPG-PPG-HPG) as a robust and efficient delivery system is presented for small hydrophilic molecules. Specifically, after the HPG-PPG-HPG is incubated overnight at 4 °C in the drug solution, it is hydrated into a hydrogel containing micron-sized voids, which can encapsulate hydrophilic drugs and achieve 100% drug encapsulation efficiency. In addition, the voids are surrounded by a densely packed polymer matrix, which restricts drug transport to achieve sustained drug release. The hydrogel/drug formulation can be stored for several months without changing the drug encapsulation and release properties. HVH hydrogels are injectable due to shear thinning properties. In rats, a single injection of the HPG-PPG-HPG hydrogel containing 8 µg of tetrodotoxin (TTX) produces sciatic nerve block lasting up to 10 h without any TTX-related systemic toxicity nor local toxicity to nerves and muscles.